Great review Richard, thanks for posting it! Just happened to be looking at this combo for one of my builds I have going.

I don't own a 1/8 scale RC yet but I will some day and man does the motor combo scream power the ESC alone is mega powerful.thx for your time and putting this out there.✌👍

They make great brushless combo for a very good deal and i support it everytime

wanna see this thing running!!!! have a nice one buddy!!!

I have been a big fan of Hobbywing. When my stock Castles go bad, I always go with a Hobbywing replacement. Though usually a Hobbywing ESC and Leopard motor for non-sensored systems. Sensored, I like Hobbywings higher end stuff.

@TheRCNetwork

7 жыл бұрын

Nice!

Looking forward to seeeing this up and running

@TheRCNetwork

7 жыл бұрын

Me too!

@nickgsxgaming

6 жыл бұрын

I just lost my rc collection to hurricane Irma down here in Florida I wouldn't mind starting again with a buggy like this one

Impeccable taste, Rich.

@TheRCNetwork

7 жыл бұрын

Thanks Steve!

I love hobbywing products! Such good value.

@SpeedSyko

3 жыл бұрын

I have castle and hobbywing. I love hobbywing because there strong and a workhorse and easy to set up.

Nice! those ezrun systems are pretty good!

@TheRCNetwork

7 жыл бұрын

This one: kzread.info/dash/bejne/mqmX3MWjXZCekaQ.html

Looks like good quality

I gave a thumbs up and subbed! Nice style and great info.

@TheRCNetwork

6 жыл бұрын

Nice! Thanks for subscribing!

I just put this motor an max in my v3 talion arrma . It's at hobby town being install can't wait to get it. Good video TKS

@jonathangomez7094

2 жыл бұрын

I’m thinking about the same exact build w my talion. How has it been?

How will this work with TLR 8ight e 4.0? Thanks for the great review!

Got this set up to go in my Axial Yeti XL Kit ... Got to say, I have been using Hobbywing products for a while now and can vouch for their quality. very well finished and very reliable. Makes you wonder why anyone would pay the extra for Castle and Tekin products ... all those I spoke to in hobby stores stocking Hobbywing, Castle & Tekin products claim you are paying for the name of the latter 2.

@josers4153

4 жыл бұрын

Did it hold up? Thinking of doing the same for my yeti xl

Can you do a review on the hobby wing sc8 as it is an ESC most people buy for the 10 and 8 scale cars. That video would be great for referring to! Great video!

I have got this kit but I want to plug only one single 4s battery. is it possible to connect it with out doing some soldering?

Will it fit nice on my kyosho inferno ve ?

The esc and motor combo look similar supplied equipment to the arrma nero RTR, minus the program card,. It might be the same one, just wait for a sale in tower hobbies, I just purchased my nero for $345 for the RTR or look for used set on eBay or Facebook community.

@TheRCNetwork

7 жыл бұрын

EnzosToyRoom ESC is similar to the V2's, motor is not.

@EnzosToyRoom

6 жыл бұрын

The RCNetwork thanks

nice review, right it is 6,5mm connectors? (not 6mm?)

I just bought a kyosho scorpion XXL, the kit version, and I was wondering what ESC motor combo should I get for it. Looking for maybe 6 to 8s.

@TheRCNetwork

4 жыл бұрын

Maybe look at the Max 6 - it would give you the option for 6s or 8s

Do you think this set up would work well in a tekno sct410.3 that I want to run on 3&4s...if not can you suggest another hobbywing setup. Thanks in advance

@TheRCNetwork

4 жыл бұрын

You'll need a new motor plate (not motor mount) as the SCT410.3 was designed for 550 canned motors to sit the motor as low in the chassis as possible. Next, the can is too long (likely) to fit the ESC. Ideally you'd need a 70mm length can to fit. Why do you need 3 and 4s ?? If you want to run 3s, find something in the 3000-3500kv range for 550 sized motors

Good afternoon, I have hobbywing 150 The water proof would like to know if to walk in the water in the rain with him have to turn off the little window or it can stay on?

@cwatson42785

6 жыл бұрын

daniel lampazzi It is waterproof so you should be good with a little water.

Can i run a 110 scale it's a piranhas need to find out any information would be greatly appreciated Mike holden out of North Carolina said that

Would this be a good setup for the proline mt? Also what would the speed roughly be out of this setup?

@ELValenin

5 жыл бұрын

With 6s the pro mt is overpowered

Nice video, I'm thinking about building a budget limitless, do you think this would be a decent setup or should I just go with a rtr like an infraction?

@TheRCNetwork

3 жыл бұрын

This one is about the same as the stock, maybe a slight advantage with the included programming card. I'd check what others are running...I know some are running 8s, which this is not capable of

Nice video, i'll looking for the 2022 versión of this kit

@TheRCNetwork

2 жыл бұрын

Happy RCing!

For the batteries it can handle, is there anything pacific about the C rating (discharge rate) it can handle?

@TheRCNetwork

3 жыл бұрын

Nope, nothing.....it can handle anything on the market

esc hobbywnig 150A to run with it water need to turn off the fan or do not leave it on??

@montykumar32

6 жыл бұрын

daniel lampazzi leave it on but be sure to clean after that

I have slash 4x4 and I’m thinking of putting this setup on it,just trying to find out if I need a different motor mount.

@TheRCNetwork

6 жыл бұрын

I believe so...

@sendit7717

6 жыл бұрын

pats4life I wouldn’t recommend 1/8 electronics for the slash unless you want to break parts for days, I made the mistake.

@eacalways

6 жыл бұрын

Read more too late it’s already installed and so far no broken parts yet

@cripplekid0902

5 жыл бұрын

pats4life hey I know this is late but I’m thinking of putting the same setup on my vxl rustler. Do you think it will fit in the motor mounts?

I've been thinking of buying this combo for my Maxx. The Maxx ESC is made for 4s and only needs 1 4s lipo. For me to switch to this and use my 5000mAh, 25c, 4s traxxas lipo on the ESC, what would I have to do? I dont ever plan on running 6s anytime soon.

@TheRCNetwork

3 жыл бұрын

Yeah, it should work great and be a nice upgrade - double check the size of the motor compared to the max though. As for what you'll need - just a connector for your battery....if it's Traxxas, they're a bit hard to get. I'd just have this and the batteries switched to XT90's if possible

I want one? I only have XLX2’s max 5 and 6 systems. I don’t have hobbywing smaller setups. Would be good to have!

@TheRCNetwork

3 жыл бұрын

It's a great option if you have a car to fit the bill

Hello my friend. Planning to buy this combo. I want to ask, are those capacitors help battery from buffing?

@TheRCNetwork

6 жыл бұрын

kimpee orais nope, not at all. They’re designed to protect the ESC - kinda like a safety blanket

Nice

@TheRCNetwork

6 жыл бұрын

Thanks MTC!

Does this set fit to be used in a 1/8 buggy? There is much difference in the behavior of the car, between a set sensored x sensorless?

@TheRCNetwork

6 жыл бұрын

Technically, it's a truggy sized motor, so some buggies may have issues fitting it (length) otherwise, should work fine. As for sensorless vs sensored? Sensored will be smother at lower throttle and smoother overall. Sensorless can "cog" at low RPM

@paulobraz6117

6 жыл бұрын

Do you think that this hobbywing ezrun set would look good on tekno EB48.4, MBX7, MBX8? Do you think it would hurt their mechanical parts? Because at first it would need to reduce costs and in the future would put the ideal motor and set

Thanks for reviewing. Can this run a single 3s pack?

@TheRCNetwork

4 жыл бұрын

You can, it will be a bit under powered. 4s is the ideal

@ValFPV

4 жыл бұрын

@@TheRCNetwork nah. 6s

Is this waterproof?

I wonder if this would be a good combo for a outcast 4s?

@TheRCNetwork

4 жыл бұрын

It will be an equivalent system, maybe a slight upgrade

I want to put this in senton. Can i take off the power cords and put on the xt90 ones off the blx 185, and run a single 6s battery. Thanks

@TheRCNetwork

5 жыл бұрын

Yes, you would have to unsolder the connectors and reuse them on the HW ESC - although I would use fresh connectors on a new ESC - they're like $3

@bhansen9468

5 жыл бұрын

@@TheRCNetwork thanks

Could I put this on a traxxas maxx

Think I’m going to buy this for my kraton exbb

@TheRCNetwork

3 жыл бұрын

Great combo for it

I just got the Xerun sct pro ESC and I got to say it is a beast and I love the power switch and the mounting kit for my Slash was a plus too.

@rcn4fun012

4 жыл бұрын

Did you mount on a slash 4x4

Is it possible to use a max10 motor with a max8 speed controller.

@user-dz2jv4in5z

4 жыл бұрын

omy Maldonado Probably but there’s no point because the max10 motor will run only 2s or 3s or something like that.

What's the difference between this and the Mamba monster 2 and Castle 2200kv set up ? They both are same price.

@TheRCNetwork

6 жыл бұрын

I'm def not a Castle expert

@kfcdeliverytnt5019

6 жыл бұрын

The RCNetwork hi what do you like for a tekno mt410 ???thx

good

What’s the best and fastest and torque Hobbywing for 1/8 buggy ?? Anyone ??? Or Ken can you advise

@TheRCNetwork

Жыл бұрын

Who’s Ken?

Is this motor better then the traxxas velineon motor?

@kidsworldstorytime4885

5 жыл бұрын

Yes it’s bigger and more powerful. It’s the size of an Arrma 6s blx system like on a Typhon, Talion or Notorious.

Question. Will you be doing a build on the new gmade gom?

@TheRCNetwork

6 жыл бұрын

Not sure....I have a ton of new stuff keeping me busy right now,....

I have this setup in my E-Revo 2.0 its a monster

@TheRCNetwork

Жыл бұрын

Nice! It's a runner!

@taylorking45

5 ай бұрын

What’s the difference from the stock motor/esc? Faster? More torque?

Hello, my XR8 SCT is dead because of the dust and humidity on the track where I usually go. Do you think I could put this combo in my RC8B3.2E ? I already have an EB48 2.0 with the XR8 SCT + 4268sd G2 1900kv combo that I keep for good weather 😅. Thanks in advance for your answer 👍

@TheRCNetwork

3 жыл бұрын

Yeah, it will fit...the motor can is a bit longer (it's really a truggy length motor) but it should do fine

@alexandretaha

3 жыл бұрын

Thanks 👍

you say the esc will handle up to 6s. Will the motor also handle 6s?

@TheRCNetwork

2 жыл бұрын

In theory, the 2200kv can handle 6s...but it's at the top end for 6s....Usually 2000kv and below is a better alternative

Are you going to stick with those T connectors for this setup?

@TheRCNetwork

6 жыл бұрын

For now, yes

what's the difference between the HW 4268 (2600kv) and the 4274 (2200kv) ? which one is better for a 1/8 buggy?

@TheRCNetwork

4 жыл бұрын

The 4268 is the size of the motor (42mm x 68mm) - the 4268 is traditionally a buggy sized, where the 4274 is for truggies. The 2600kv will be pretty fast, especially on 4s - I usually run 1900kv for my 1/8th scale buggies

@marcocheng123

4 жыл бұрын

@@TheRCNetwork thanks Richard. Very useful info

@marcocheng123

4 жыл бұрын

@@TheRCNetwork Richard, what do you think about this combo (Hobbywing 38020404 XeRun XR8 with a 1600kv motor). Is the motor appropriate for 1/8 buggy? I am not a racer, but I do enjoy going to tracks and some occasional bashings.

Would this be good for a 1/8 Truggy

@TheRCNetwork

Жыл бұрын

Yep, it would work great in a budget build.

I just purchased this ESC for my Traxxas UDR.... is that a good matchup for that vehicle?

@TheRCNetwork

5 жыл бұрын

It might be a little underrated for the weight of the UDR. It will be an upgrade on stock though.

@rcbullshit7859

5 жыл бұрын

@@TheRCNetwork I actually got a hold of hobbywing and talked to a tech and he said that it's a good matchup. Replacing the ESC and the motor actually cut about 12 g off of the truck so it's a little lighter with this setup. Original weight of the truck is a little over 13 pounds. Thanks for the reply!

@TheRCNetwork

5 жыл бұрын

Good deal!

@rcbullshit7859

5 жыл бұрын

@@TheRCNetwork just a quick update. I got my first few runs in yesterday with the max8 set up in my UDR.....WOW!!! Definitely not underpowered that's for sure! I am extremely happy with this setup in this vehicle. I will be buying another max8 to put in my second UDR that is now running on stock. Unbelievable difference in the power of this vehicle now! Thanks for all that you guys do keep up the good work have a great weekend.

would this work with the yeti trophy truck??

@amistry2092

7 жыл бұрын

rem 419 yes! But you may have to modify a few things. It will probably just over power it

So a couple questions hopefully you get back to me I would appreciate it it runs double wires for Batteries can I clip that to run 1 2 s off of this esc I'm trying to put it in 1/8 scale Mugen 4wd buggy n my track only allows 2s for racing

@TheRCNetwork

3 жыл бұрын

You can just add a “loop” on one of the connectors - basically just the battery side of the plug with a wire going to either side of the connector to complete the one plug. But I’m curious - your track only allows 1/8th scale buggies to run 2s? You may want to consider a different motor, as you’ll never have the power with this one on 2s

@djd406

3 жыл бұрын

@@TheRCNetwork I'm in Montana were lucky to race grcr is where I run I'm just looking for a good cheap esc motor combo for a mugen mbx6 eco I got used I've always been a 1/10 scale guy so new to the bigger cars just looks fun n I jus got my buddy Jordan into the sport he started with a Traxxas rustler to bash for fun and now he owns 10 trucks but needless to say the best ESC motor combo for a 1/8 scale mbx6 if you have advice for that I would appreciate it

@TheRCNetwork

3 жыл бұрын

I'd check what the other guys are running for the 2s e buggy class. Usually you'll want an SCT type of system - like the HobbyWing XR8 SCT Pro ESC and the Xerun 3660 4300kv motor. I dabbled in this "lightweight" e buggy class a few years ago and honestly, it tore through batteries like crazy on 2s. You'll want to remove as much weight from that eco as you can though

would this fit in a rustler/bandit

@taylorking45

5 ай бұрын

No

This or the castle combo any advice?

@TheRCNetwork

3 жыл бұрын

I would never run Castle.....

In Australia there $350 a kit which isn't cheap to most Australians but doesn't mean I'm not getting it because I am right now I'm on a 3s lipo with a cheap brushless motor so this should be a lot faster

@TheRCNetwork

3 жыл бұрын

I'd find a better distributor.....isn't HW just right across the pond there in China?

hey guys can you please help me with some info.... i am trying to build my self a crawler, and i am trying to figure out do i need. i was reading on the internet if you have a powerful servo you also need some other electronics not to fry that servo up. can somebody tell me what else do i need. i want to buy : NOVAK M2 DIG 3S ESC/2x TERRA CLAW 45T MOTORS/3A BEC COMBO, Savox SB2230SG High Voltage CNC Servo - 42KG - 0.13s, HPI TF-45 / RF-45 Radio Set. do i need anything else? the rig is 4kg without electronics. thank you so much.

@TheRCNetwork

7 жыл бұрын

You'll want to install an external BEC from Castle - typically a 10amp BEC will work - amzn.to/2y5ygAu There's specific installation instructions - search on KZread - it's not hard though

Will this fit a Traxxas 2 Wd slash?

@TheRCNetwork

4 жыл бұрын

Way too much power for a Slash 2wd - this is for 1/8th scale buggy/truggy

How do I run a 3s lipo on it it won't like me do I got to program it

@TheRCNetwork

2 жыл бұрын

Plug in a 3s and go! You can fine tune with the program card, but this system will take 2s-4s

where plug in de sensor cable of a sensored motor?

@TheRCNetwork

4 жыл бұрын

This is a non sensored system

@user-dz2jv4in5z

4 жыл бұрын

RubenRC It’s a sensorless system, but the esc will run a sensored motor on sensorless mode.

Why are you putting a Truggy motor in a E-buggy?

@user-dz2jv4in5z

4 жыл бұрын

Patrick Michael POWERRRRRR!

how does this compare to a 1/8 scale castle system?

@Nickysix6

7 жыл бұрын

Jeb Bennett my personal opinion both of them are good. The sensord castle mamba monstere is a little better

@TheRCNetwork

7 жыл бұрын

Castle offers a couple - the Sidewinder 8th - I think this one is better....as they're equal in price and this one comes with a program card, heat sink on the motor and an actual amperage rating on the ESC (Castle usually never lists this). Comparing the Mamba X - sure, it's a bit better, but also $75 more...If you're looking for a real powerhouse, check out the Xerun XR8Plus combo from Hobbywing...it's fully sensored and Wifi capable: kzread.info/dash/bejne/f2uNyKSJY8a7m84.html

@jebbennett5595

6 жыл бұрын

Thanks for the feedback, may look into putting this in a tekno MT410

A overkill combo for this buggy.. Maybe a little to much? 4s will be ok, but 6s I think will chew up the entire drive train.. Still you have the option nonetheless

@TheRCNetwork

7 жыл бұрын

I typically only 4s....this will scream on 4s, especially on a track

Is this a sensored ESC and motor?

@TheRCNetwork

4 жыл бұрын

Nope - this is sensorless

Program in card will not let me get out of race mode

@TheRCNetwork

4 жыл бұрын

That's strange - maybe reach out to Hobbywing North America?

Is it possible to run just one battery?

@TheRCNetwork

2 жыл бұрын

Yeah, sure, you'll need a loop to close the open port

Can you put that motor with the Castle Fan x8

@TheRCNetwork

4 жыл бұрын

Not sure.....I'd check the size of Motor that the fan can fit........I believe this on is a 42mm wide can

@v.e.s2884

4 жыл бұрын

The RCNetwork ok cool I saw the fan for it but I just gat that motor two try it is it’s good

@v.e.s2884

4 жыл бұрын

The RCNetwork and I just subscribed two you if you find any information on that for me please let me know thanks again and I gave you a 👍 thanks again

This is expensive are you sure it is budget???? I guess cheap compared to other 8th scale motors?

@TheRCNetwork

7 жыл бұрын

Street price on the combo is about $175 with the program card. For an 1/8th scale system capable of 6s, this isn't bad at all considering some race ESC's are over $200

@_systemd

6 жыл бұрын

here in eu i paid those 175 just for the ESC . hobbywing here is closing castle on the prices . far from being a budget product anymore.

@ClarkesMadRcs

5 жыл бұрын

Haha lol ikr I'm getting a hobbywing max 10 lol it's 120£ haha but it runs 4s

Thats alot of motor for a buggy!

@TheRCNetwork

5 жыл бұрын

Yep!

is this a good platform for limitless build 6s, anyone? thanks in advance.

@TheRCNetwork

3 жыл бұрын

This ESC is a 2s-4s race ESC for 1/8th scale buggies....I'd look into the XR8 Plus (while it's still available or the Max 6

@mhurley13

3 жыл бұрын

@@TheRCNetwork so this is what i think i will get? Hobbywing Xerun XR8 Plus Brushless ESC/G2 Motor Combo (1900kV)

@mhurley13

3 жыл бұрын

thanks again, this is confusing to a newb.

Is it waterproof?

@TheRCNetwork

6 жыл бұрын

Yes

Is it brushless

@TheRCNetwork

6 жыл бұрын

Yep

It looks like a castle creations 2200 kv motor

@TheRCNetwork

6 жыл бұрын

Def not a Castle motor

Can this fit in a 1/10? Like a Traxxas rustler

@TheRCNetwork

4 жыл бұрын

This is a 1/8th scale system, I highly doubt it, and it's not needed.

@chevyboi8392

4 жыл бұрын

The RCNetwork yeah ik but I want a really fast bash car, andI got some upgrades to make it fit, I just need a spur gear ⚙️ but idk where to get it from

@TheRCNetwork

4 жыл бұрын

I hear ya, but this motor was intended for a 1/8th scale truggy - needs 5s-6s to run to push around a 10lbs truggy - the weight penalty alone from the motor and battery would bring the speed down. Going with an appropriate 540/550 sized motor with a higher kv will get you the speed - like the Xerun 3652 5100kv - it's a 4 pole sensored motor with a crazy amount of torque and top end speed

@chevyboi8392

4 жыл бұрын

The RCNetwork yeah, and I’m going to add weight in the car so it wouldn’t flip so easily and do wheelies, and for the esc imma try to put it in the side of the car

@topg1964

3 жыл бұрын

Yea it will. People have been putting in castle creations 1/8 mamba minter in the rustler forever. It’s a speed run build idk what that other guy is talking about😂😂😂 “the rc network” don’t know much about rc

Is it waterproof

@TheRCNetwork

6 жыл бұрын

Nope, but the Quicrun version is...

2 6s or 2 3s batterys

@TheRCNetwork

3 жыл бұрын

Two 3s batteries in series to equal 6s

@isaacmack1316

3 жыл бұрын

@@TheRCNetwork do you have a video for the 8s model

sorry, friend tentei escrever pelo google translate RESPONDER

If Hobbywing didn't have horrible customer service I would continue to buy their products

@TheRCNetwork

7 жыл бұрын

Risha Circuit RC Channel I've never had an issue with any of my HW products....and I have several systems...

@AussieRCPlayground

6 жыл бұрын

The RCNetwork I'll second that. Never had an issue with Hobbywing and haven't had any negative feedback about their CS.

@jahmenrcbuildingasone4254

6 жыл бұрын

Risha Circuit please don't spoil the bunch for one bad apple.

@rishacircuit1594

6 жыл бұрын

Brand new 1080... The throttle would cut out at random times. It was odd. I tried other things and everything pointed to the brand new esc I bought.. So I emailed them (hate when email is the only way, would be way easier if I could call) and they asked for pics of how my truck is set up and all that. My email doesn't send pics for some reason.. I tried and never got a response from HW. So I went to a Castle SW3 esc like I should have done in the first place.. Haven't had any issues since. I will stick to castle from here on out- most of my RCs are powered by their products and they are great. Love my sensored 3800 combo in my Yeti. Best part is, you can CALL castle if there ever would be an issue.

@AussieRCPlayground

6 жыл бұрын

Risha Circuit Each to their own, I guess. I had a SCT sidewinder once and used it in a lightweight SCT only to have the thing overheat after 10min use. I know it wasn't over geared and the truck wasn't heavy, so after that I didn't buy another Castle. Went to Hobbywing and never looked back. Good reliable units that have never let me down. The Max8 (not a cheap system as Rich makes it out to be) is by far the best combo I've ever owned for a 1/8 scale. Crazy powerful with heaps of tuning options via a card, not a laptop and again, very reliable. Castle do make good systems, but I find that Hobbywing are better and here is Australia, they're easier to get and are cheaper. Can't beat them for value. The only thing Hobbywing don't do are 1/5 scale systems and that's when Castle comes in handy, their 1/5 systems are really good (from what I hear).

Will this work in a traxxas slash

@bhjvkvkvjuvujgkv7375

6 жыл бұрын

Dennis Oneil its a 1/8 system, a slash is 1/10 so I would not recommend it

@charlesc.3909

6 жыл бұрын

It works with the rustler

@cripplekid0902

5 жыл бұрын

Chuck Carver really? I was thinking of putting this setup in my vxl rustler. Do you think it will fit?

sorry,ik probber het opnieuw

Are you aware that you kept saying 4272?

@TheRCNetwork

6 жыл бұрын

Oops....but I said 4274 at 1:21, 1:36, but yeah at 1:48 said 4272, but corrected right after....darn it, did it again at 2:09...dyslexia...kind of

@DonaldByrd1970

6 жыл бұрын

It's cool, we all make mistakes. I only pointed it out as to give notification, not to chastise.

Why are rc car so expensive for a bunch of plastic parts that break often I know it's fun but its too much for what it is

@bhjvkvkvjuvujgkv7375

6 жыл бұрын

hariharn monesh they aren't a bunch of plastic parts, a cheap traxxas vehicle may be, but this buggy is most aluminum, and the plastic parts it has are very durable.

@brentsebastian8847

6 жыл бұрын

Sounds like you run a traxxass. Look at an arrma best decision ever

@luftwaffle6701

4 жыл бұрын

Arrma AND Traxxas is terrible..get a kit like the Tekno, TLR, or AE.

Not sensored? Not worth it

@TheRCNetwork

Жыл бұрын

How did you find the maybe 2-3 sensorless reviews I did? Literally 30+ reviews of sensored motors over the years

How is it a budget build if you throw in some hobby wing electrics. If the brand name would end on king instead of wing it would be😂😂😂.

@OZK-MTB

7 жыл бұрын

Rc/is/for/me cause hobbywing is pretty inexpensive

@I_Count_Twice

7 жыл бұрын

Rc/is/for/me Right!?! Hobbyking is my choice for budget stuff. Never had a problem with any of it yet. Hard to beat for the money.

@TheRCNetwork

7 жыл бұрын

I like Hobbywing because they're also based in the US....no conversion rate on money, shipping delays and the nightmare warranty issues with HobbyKing....plus, hobbywing has driver/tech support as well. Good luck on Hobbyking...just my opinion of course

THAT IS NOT A BUDGET BUILD THE ESC ALONE COSTS OVER 200$ JESUS CHRIST

@TheRCNetwork

3 жыл бұрын

Maybe if you yelled a bit louder?? The entire combo - motor/ESC/program card is $179. This was a budget build for a 1/8th scale E buggy that would be raced.....so $179 isn't terrible and it's from a reputable company that has warranty service and product support.

@andromeda8940

3 жыл бұрын

@@TheRCNetwork bruh where the hell do you live that you can get it for that cheap? I'm in denmark and the cheapest price i could find was 219$ not including shipping!

@TheRCNetwork

3 жыл бұрын

@@andromeda8940 The US - We have HobbyWing North America in Los Angeles that imports it all in for the US. Unfortunately, you're going to have to find a brand that has a bit better trade / market share in Denmark to make it all worthwhile

@andromeda8940

3 жыл бұрын

@@TheRCNetwork dang it, alright thanks. I'll look for another brand with the same reputation who has more market share in denmark

Is it waterproof?

@TheRCNetwork

6 жыл бұрын

Yes