There's so much joy in seeing a dog that loves being a dog!

Now I have a use for this brand new Fram filter that came with my jeep when I bought it!

@sixtyfiveford

Жыл бұрын

You could always put it under the wheel and use it as a wheel chock

@nigelnigelakiraakira

Жыл бұрын

So I made one of these out of that filter and it worked perfectly. Didn't even need to cut it down to size! Just snipped the top and gutted it. PH16 was the code for that size filter. I actually bought another for the passenger side so they'd match. Lol.

The Florida pool pump motor repair guy, approved ! that was good info, thanks sixyfiveford

We must protect this guy at all cost!!! Dropping the wisdom like a damn professor of the garage.

Old school 👍🎸

Heck, Yeahhh!

Nice cup holder 👍. Your VW truck is looking good. Good to see Ginger, she has a great of personality.

@sixtyfiveford

Жыл бұрын

Thanks 👍

Sweet

@sixtyfiveford

Жыл бұрын

Hey thanks

Great idea. Also, that dash you restored seems to be holding up pretty good 👍

So fun!

Maybe some clear paint if you're concerned about rust

Nice recycled, reuse, repurpose. 👍 52 Stay well, Joe Z

Creativity at its finest

Made mine for the boat out of pocket.turned out real nice. Good job on ramrod holder

Very cool!

@sixtyfiveford

Жыл бұрын

Thanks for watching

@rucebaybruce6174

Жыл бұрын

@@sixtyfiveford Your channel has good content. I appreciate your content.

I ❤️‍🔥it. Definitely gonna need a set for the '55 Chevy Rat Rod.

Always great to see what you are crafting next Moe. Great job! Thanks for sharing.

👍👍👍

Fantastic idea and invention. Now that sets my mind working as to what else can I use to make one without welding. Thanks for the videos.

I need the 2nd one lol

Cool cup holders 👍👍👍👍

Way cool and unique. Nice work

@MaxGiganteum

Жыл бұрын

Bonus points for a roll & bead on the top of the cup. Even more bonus points for the entire edge of the clip! 🤔👍🏻🇺🇸 - Max Giganteum

Now all I need to start is a door that'll hold up a cup holder and sure hope yours is Ginger approved. BLESSINGS!

Mint👌

@sixtyfiveford

Жыл бұрын

Hey thanks

Super cool mate

fractions are the American way

Drill pin hole in bottom to drain any liquids and also want have suction pulling cup out.

Simple but practical, a lot of drink holders are designed just for a can or bottle but they can't fit a can in a cooler.

I had a console thing that came from Walmart that had two cup holders and a place for cassette tapes that I would move from truck to truck. It had a sheet rock screw in the center to keep it from moving around.

@apexcustomsmokers

Жыл бұрын

Lol 😆 that's awesome brother!

@whofactchecksthefactcheckers

Жыл бұрын

I still have one of those I do the same thing with, it's been in 5 or 6 vehicles over the years. I cut slits in mine on the sides to run the middle seat belt through to secure it

Very cool idea, pun intended. Thanks Moe

MM77 Approved 👍🏼👍🏼……………………………I was REALLY hoping when you were going to tell the measurement in mm, you would just say “ who cares!” LOL!! You almost did.

So 😎

Sixtyfiveford- The channel of knowledge & SOLUTIONS! Great job Moe.

@sixtyfiveford

Жыл бұрын

Hey thanks

Great idea, recycle old stuff ftw, I put office trash cans in my vehicles with bungies for my 32oz bubba mug to avoid the floods

Love the y shirt.

@sixtyfiveford

Жыл бұрын

Thanks

Thats a cool 😎 little project. I was saying to myself "tig weld it" when you first suggested rivets.........great minds I suppose....🤔

@MaxGiganteum

Жыл бұрын

As much as I hate to say it... JB Weld the cup and bracket together if you don't have a welding setup nor are able to rivet. Of course, any brand of multi-part adhesive can work just make sure it's meant for metal. Drill a half dozen 1/16" holes through your parts and use something like 90-120 grit sandpaper to scratch the pieces so that the adhesive gets a really good bite. Hope that helps! 👍🏻🇺🇸 - Max Giganteum

Datz De Kewlest!

Good job! If your rivets were pop rivets, and they're too long, you can cut them down. You can knock the pin out the back way , then cut down the rivet , then put the pin back in and rock on .. I use a little tubing cutter but you can leave the pin in and cut down just the rivet with some snips or dikes kinda gnawing on the rivet and using the pin as an anvil to the process. Then slide the rivet off so you can get the cut piece off then put the rivet back on the pin .. leaving the pin in while cutting keeps from crushing the rivet...

@sixtyfiveford

Жыл бұрын

Thanks for the tip. Don't know why I didn't think of that, seems so obvious.

@jdog4534

Жыл бұрын

@@sixtyfiveford we all know you would have thought of it if it really came down to it. I'm just glad i was able to give a little back after all you've given ...

@MaxGiganteum

Жыл бұрын

For rivets that protrude a little too far, you can often peen them down close to flush. Note that the material of which the rivet is made can influence peening - soft metals such as aluminum, brass or mild steel are easily peened. However, stainless steel can be a royal PITA to peen. If in doubt, test it out on a single rivet before proceeding. Best wishes! 👍🏻🔨🇺🇸 - Max Giganteum

Cool idea. I think I'll use an old coffee can.

That was neat. Your truck's probably faster now. Yeah. Peace

Just be sure to seriously de-oil the inside of that repurposed oil filter housing with something like Acetone or brake cleaner... you'll smell the oil for a good long time if you don't - especially so when it bakes in the sun. 🌞 - Max Giganteum

@sixtyfiveford

Жыл бұрын

Absolutely

there seemed to be a bit of suction still, maybe drill a hole in the bottom of the filter?

@MaxGiganteum

Жыл бұрын

I would drill a hole on the side about 1/3 to 1/2 of the way from the bottom toward the top hidden by the clip. Prevents suction and you won't have anything leaking out onto the door panel or onto your leg. Peace & good vibes! ✌🏻🇺🇸🥤 - Max Giganteum

Cool! Moe's "Home Brewed Engineering" has triumphed again! I see that Ginger can take a shower all by herself! Lol!

@sixtyfiveford

Жыл бұрын

Funny, She'll spend all day in the water but hates the shower.

@Enigma-Sapiens

Жыл бұрын

@@sixtyfiveford, Lol! Doesn't that figure...

AHH! I accidentally dislike but quickly fixed it to like it. So I clicked your advertisment to make up for it. Prety cool idea haha. HEY I am socked that you being a Ford guy has an AC Delco floor matt ha

Cool as chit. Now how about a gimble mount?

I would think you would fabricate one that drops down from the ceiling, slacking... lol The oil filter great for a ratrod.

It's a bit large but would a exhaust pipe expander work for opening that up?

@sixtyfiveford

Жыл бұрын

I don't see why not.

Blue line 🤣

Great job. No, luck with the bio-diesel? Thanks for the upload

@sixtyfiveford

Жыл бұрын

Not yet

I welded a magnet to the bottom of a homemade cup holder and the whole thing is mild steel. I wish i could post it. It sits on the floor of my jeep, on my toolbox or hangs on the door.

@sixtyfiveford

Жыл бұрын

Awesome

The 99th of what can we do with a used oil can.

I need to make one! I'm daily driving my 1988 Ford Escort and there are no cup holders.

@sixtyfiveford

Жыл бұрын

That's an awesome daily driver!

Great idea. Maybe you have an idea to stop my liquid tape & tire patch with the brush inside from drying out . I’ve tried putting car paint thinner in and tape the lid , I’m thinking of getting a kitchen vacuum pump put them in plastic bags & suck the air out . Maybe you can show us something in the future thanks enjoy the show 🇺🇸🔧 Greetings from Canada 🇨🇦🛠👍

@MaxGiganteum

Жыл бұрын

Install your items inside a 100% sealable container and fill it with Argon if you have access to it. Argon often helps preserve materials that harden or dry out in normal atmosphere. This trick is useful for primers, paints, sealers & coatings that come in cans - plastic or metal. Most automotive painters are well aware of it... but it doesn't hurt for anyone to try it with anything. Source of Argon? Your welder if you use it as a shielding gas. Best wishes! 👍🏻👨🏻‍🏭🇺🇸 - Max Giganteum

@sixtyfiveford

Жыл бұрын

I've tried a few things. Welding shielding gas (c25), straight argon, exhaling into the can before shutting it, plastic wrap touching the top of it, etc. The only trick that I found that really works is simply turning the can upside down and storing it on its lid. Any miniscule lid gaps are sealed by the liquid.

I can recall at primary school, getting a proper caning from the headmaster, for not understanding fractions. It must have worked, because, I went on to study Engireering, and didn’t encounter any problems with fractions. Nowadays if this happened, it would become a police matter. Greetings from Ireland.

@c50ge

Жыл бұрын

When you mean a canning, was that with a paddle?

@williamwarnold6737

Жыл бұрын

@@c50ge Thanks, caning,was the word I intended to use.

I like the center console version that keeps your drink out of the sun. Is that VW truck saving you a ton of money on fuel?

@sixtyfiveford

Жыл бұрын

I wish this VW had space for a center console. It pushes 50mpg.

@Kyle-ev4fk

Жыл бұрын

@@sixtyfiveford Dang, 50mpg is pretty good. I have been looking for a VW diesel ever since your first video on it.

Screw the passenger legroom? I would think that Ginger needs TWICE the legroom as a normal passenger, as she has twice the number of legs.

@themoelman

Жыл бұрын

She's like half the size of most passengers hehe

The center console is better because the 108 degree sun would boil my drink.

When I lived in the SW the backyard was dry sand/dirt for years and finally got around to installing a sprinkler system which made it green. Then the wife brought home, against my wishes, a puppy with large paws as she told me it would stay small... It grew fast and was obsessed with the sprinklers to the point of digging to the bottom of the plumbing and chewed off the threaded fittings for the risers and reverted the backyard into dirt, so I named it Dirt Dog. One time an expensive Horizontal Dial Indicator disappeared from my work bench, after turning the shop upside-down I found it outside dripping with slobber and coated with dirt. We moved to the North-woods and first time it got loose it bounded happily across the field and off in to the wood-line amongst a long list of predators. The wife found it three weeks later and got it back from its new reluctant owner. BTW, your first location is better just because it is central in the cabin with the most shade.

@sixtyfiveford

Жыл бұрын

Crazy dogs

NO WASTE AT MOEs HOUSE......Trash guy comes and picks up an empty can every Thursday. ha ha.

That is a detail often forgotten: metric vs imperial is not the same issue as decimal vs fractions. Still.... We all know who is right, so no need to even mention it ;)

Rolls Royce wants to speak with you ! Kind of a hobo crafts but hey if it works . . . Guess you could make it out of sewer plastic pipe with pop rivets.