"Get out there and paint some shit" That all the motivation I need. Came out nice.

@appliancedude63

3 жыл бұрын

@Caiden Gunnar where do you get flixzone?

I use the same stuff here in the US and love it for an extra addition for my shop

Looks like a fun project that turned out 👍🏻 I’ve gone to bypassing the supplied standard hardener and using the slow, even on the black kits. I found it stops the slight blotchy spots you sometimes fight to get rid of with standard.

Excellent my friend the finish cap is exceptionaly, congratulations great job.

Going to be trying raptor coating on a truck soon myself so this was handy thanks man,I know have a better idea of how much I'm going to need and to use a primer 👍👌 nice one Gunman

Very good work! Always enjoy getting to see your painting.

Saw a sprinter van sprayed in raptor this week!!!! It’s good stuff. Good video again.

Impressive, very close to the body color, and I think you do a great job, inspiring people to fix their own stuff

awesome vid!. i used the same stuff on the custom rear bumper swing out spare tire carrier, and also used it as "rock-guard" on rocker moldings,. a great product. also the type of texture is regulated by the air pressure

Hello from greece my friend gun man..very good job!! I see you all the time..🇬🇷

This is soo relaxing to watch. Anyone else feel this way?

Looking good brother nice video

Nice video gun man .

LOL I kept seeing the purple masking tape and thinking the Ute was purple and was wondering why the light blue bed liner. Then after the reveal I realized it was just the tape.

What about a coat of clear iver the top to get rid of striping, or will it react

Nice finish

Hi gun man I have a question for u hope u have the time and help me out here . When ever I spray my first coat of clear I get like little dirts but on my second coat they go away why is that . I'm using waterborne hi-tec spies hecker paint and using spies hecker 8096 clear coat .

What level of ppe do you recommend when using this stuff?

60PSi is good. I find that if I go higher with the air pressure a bottle will go real fast and you end up running out before you get full coverage. The tintable feature means you dont use all of the hardner. I wonder what other products it could be used in ?

I need to do a bate aluminum boat and am doing red tent..... would red primer be good with that and would I still need to use the other stuff first because it's aluminum and then primer

I think when tinting, if you can mix the colour pigments only, no binder, it thins the raptor less, just pure pigment to colour it

Hi gunny,can you use this stuff for under body protection ?.....Great vid Many Thanks from UK

Love this stuff, use it on everything.... Hose it on with a turbine hvlp, nice and semi-smooth

@fuckmerossi

4 жыл бұрын

What size tip do you use?

Hi Gunman! Do you know, can i tint Raptor liner with Candy concentrate?

We love and even fix broken up grill, the spray them.

Thanks Mate

Did the base coat you used to tint the Raptor Liner have binders in it?

Nice idea have a great time

What blue tint colors are applied here? Amazing job 👏🏽

What kind of pigment did you use and where can we get it ?

Would I be correct in my thought process that if he were to thin it out 30% or even 10% or 20% That it would spray a finer pattern with less course - rough texture ???

how would it go with a lighter ocular like say "cat yellow"??

What size compressor did you use?

With urethane thinner you will get a smoother texture and can be shot with HVLP 2.0 cap.

Can you tint it with more basecoat? mix the raptor in a mixing cup to get a better cooler match?

Seeing as that base colour to the tintable would be close to the colour I want do you think it would work without adding anything?

Hello friend. How kind of color you can use with tintable upol? Thank you.

İs it possible to spray a clear coat on the raptor coat ?

Hey gunman, what does the colour turn out like compared to the original tint? Also is it any 2k Paint that you can use at the tint? Any reason you you wouldn't do an underbody?

is that Tahitian Blue? I ad a WB the same colour. I want another one

Can you clean the gun after use? Your looks brand new. I have a raptor four bottle kit but will probably only use one bottle for the first project and I don't want to end up buying four guns.

Hello mate, yes I would be proud too, it's a beautiful finish. I am about to Raptor my tray and was wondering about you only doing one heavy coat (primer excluded)? I thought you were supposed to do like a 50-75% cover - then a final coat? (I am NOT a painter). Since it's been two years since you sprayed it - any comments from you? Thanks Gunman.

@TheGunmanChannel

3 жыл бұрын

I have always gone straight up with one coat and it has always worked well but I can't see it hurting putting that extra coat on.

great job gunman, quick question would this raptor liner be ideal to use on the floor/chassis on a old custom showcar i'm restoring the underside on

@appliancedude63

5 жыл бұрын

I'm about to spray mine with it today. I'll let you know or you can tune into my channel.

With some of the guns flow is dependant on how far you screw the nozzle in ,he screwed it all the way in , so less fluid

Can You apply it on a plastic ??

Do you wear Ear Plugs to keep the paint out or because of the noise? Came out beautiful 💙

Difference between dark and tint?

what do you think this product will be like as an under coating on a floor pan? i have used 3m 2k spray sealer on an entire floor arches etc for a customer but would like something a bit cheaper for my own to test on a daily runner my concern is whether its flexible enough to cope with vibration stress around seams and whether it shrinks and cracks at the seems off to watch your other vid on it...............

@RustyZipper

5 жыл бұрын

Check out Lizard Skin, popular here in US for the undersides

@Mercmad

5 жыл бұрын

I restore Vintage Mercedes and I use it a lot for undersides of cars because it matches the original PVC coating they came with after 1960. I even paint right over the top of it as per factory and have never had a problem with it cracking.Despite the hard surface,it is flexible.

How's the color holding up

Missed a spot of the liner on the edge of the bed where the bumper mounts

Will be doing under the wheel arches of my daughter 4 X 4 with this and probably the underside...then my van....

What music was that

Is that panarama silver? Looks mint

What color was this looks great I like the light blue

Where did you get the color?

So hopefully I can get some help here with a question if I got bare metal I can to shoot any primer were 2K prime or whatever and then without sanding spray the raptor liner over it if it's still fresh

@TheGunmanChannel

5 жыл бұрын

Yes, but not too fresh. 10min at 25c then go for it with the Raptor

@robertkinney1480

5 жыл бұрын

@@TheGunmanChannel thanks I like not only that you do a video but that you actually respond thank you and liked seeing the hole video just to see how heavy you can go and how far on a bottle

@TheGunmanChannel

5 жыл бұрын

No worries man, I do my best but I can't keep up with all questions these days, I'd love to get to everyone but with a full-time job and a life it does get busy. I'm just glad you appreciate my reply, some people just expect it without as much as a thanks.

hey mate just a question isnt the raptor bed liner full of silocone the same as hammer tone paint to give it the finish it gives if so wouldnt it contaminate your spray booth

@TheGunmanChannel

5 жыл бұрын

Nope. Different stuff.

@brettwheaton6631

5 жыл бұрын

ahh ok thats good to know

I sprayed that quartz clear liquid glass and for some reason it was orange peal pretty pad 1.3 tip around 27 to 33 psi

@RustyZipper

5 жыл бұрын

What gun and what cap?

@tarasandriychuk8274

5 жыл бұрын

Tekna pro light and t20

@jimrichter9237

5 жыл бұрын

Probably fluid too low or moving too fast. And air volume is big also. Drop the psi down if not big supply

You were rapt with the results

So to tint it do I just need to pour 100ml of paint in to it? what kind of paint? Or is it something else? I am gonna spray my jeep in this so I would like it to be close to the factory color.

@gamesofcontent

4 жыл бұрын

in case anyone is wondering I have finished my jeep and all you do is poor the paint in. I got a 100ml syringe from a pet supply store and added 75ml to each bottle. Make sure you are exact with your measurements or you will end up with different shades. It also came out a lot lighter than the paint, which actually turned out better, just be aware.

@mr.aloha_8089

4 жыл бұрын

What kind of paint did you use?

So far all the videos I’ve watched on this stuff end up with a good report. I guess I’ll be using it on my truck soon. Lol

@TheGunmanChannel

4 жыл бұрын

I actually did another video where I went further into it. You should check it out. But yet it's great stuff and I do recommend it

@BolteBuilt

4 жыл бұрын

The Gunman awesome, I’ll watch it today. Love the videos, I’ll be spraying paint sometime this month for the first time and have been watching all of your videos to learn all I can.

@cnfabo

2 жыл бұрын

@@TheGunmanChannel where’s the link to the vid gunman🤘

@TheGunmanChannel

2 жыл бұрын

@@cnfabo kzread.info/dash/bejne/Z4Sto9Gknc3Zkbw.html

랩토라이너 저재함에하면 미끄러움은없어요?

What gun did you use to paint the truck and what did you use to clear it?

@justnd2582

4 жыл бұрын

Raptor liner comes with the gun to mount on the bottles, you cant clear coat over it, raptor does have a silk like finish once sprayed

Is that just regular basecoat paint for the tinting

@TheGunmanChannel

Жыл бұрын

Yeah the same colour you paint the car, but it must be solvent based

Do you know how to get rust strains off this stuff

@RustyZipper

5 жыл бұрын

Have you tried toilet bowl cleaner? Let it sit 30 min? Then hose off. We use it on house vinyl siding where the water Spicket splashes and rust stains the siding. It may discolor the liner color so test an inconspicuous Spot.

i spray sub boxes with it ..i love this shit

lost me on the mix ratio.n a cup gun you have how much raptor, how much color and how much reducer? If you added 100 mils of pigment, how much of the other products?

@appliancedude63

5 жыл бұрын

There are lines on the bottle you fill to. The 1st line is for hardner and the 2nd one is for color. You can tint it with regular automotive paint.

Did you use regular car tint color??

@TheGunmanChannel

5 жыл бұрын

Yes, it must be solvent based and don't add thinner

So you mix 200ml of hardener and 100ml of base color for each bottle? Did you reduce the color with thinner before to put it in the bottle?

@TheGunmanChannel

5 жыл бұрын

It's been so long since I did it, I really can't recall the exact ratio but no, don't add any reducer to the colour, you want it as thick as possible to get the best coverage.

@jorgecastillo1175

5 жыл бұрын

@@TheGunmanChannel thank you bro

What kind of paint did you add ?

@TheGunmanChannel

4 жыл бұрын

It must be solvent based

I sprayed my whole ford ranger with 21 quarts plus 2 spray cans for the rims

@ryanchapman423

3 жыл бұрын

What year model ranger?

What's the average cost for a full respray on a 4 door car using premium paints with minor chips in the current paint?

Gunman was that you on gold fm 104.3 ????

@TheGunmanChannel

5 жыл бұрын

They don't have Gold FM in Perth they have 96.1 but yeah similar selection of tunes

What do you tint it with?

@TheGunmanChannel

5 жыл бұрын

Solvent based Basecoat

@KevinRoadrageGarage

5 жыл бұрын

My paint guy is confused. He wants to know if you just mix up the paint as normal? Just don't add the stuff to spray it?

Love the look of the product, but, that was painfull to watch you having to spray with that weak little spray pattern... Those should put out a nice big pattern

@sinformant

5 жыл бұрын

Yeah from a painting perspective it was painful . I think its such a small pattern because its all about building it up thicker faster as it is a bedliner and they want it that way.

@splash5974

5 жыл бұрын

@@sinformant Ya maybe...or it could just be that brand of Shutz gun. I used similar products with a Shutz gun, and have had them really hosing on the product.

Raptor is very nice and cheap but I'm not a fan of the texture, LineX texture is better but quite expensive

How are you mixing your color to tint it with??

@geopin7672

5 жыл бұрын

Kevin Luck I use valspar LVBR100 base coat ... chose any color you like.I add 15% Then add 10% valspar reducer slow. it will help you work it better..

Is the tintable paint white

@TheGunmanChannel

4 жыл бұрын

It's opaque with a milky white tint

well, the prime doesn't need it to stick a polyurethane...just need to sweep and wash, blow, sand it down with 80 grit, blow again, wipe with acetone it should simple don't need add prime

@TheGunmanRAW

5 жыл бұрын

It was used for coverage not adhesion. Pretty sure I said that in the video 🤘

Not perfect? I think it's great!!! 👍

Sorry, you are far too self - critical. That job was impeccable - particularly in relation to the subject vehicle and the canvas you were presented with! Do not sell yourself short my Friend - you are very good! Many wish that they could do what you do! Kind regards, Will.

It seems so slow to apply this stuff.

That gun in the box sucks big time ..Shoot it out of a conventional 2.0 tip ,gun with a 2 quart pot. I tint it at 20% 200 grams . I also do a raptor base coat first Base coat ratio is 20 % I use valspar LVBR100 base coat tint any color.. 2 coats let flash 15 min 20% Valspar LVBS100 reducer slow Then shoot your texture over it you can do different types of texture with the gun and fan . I do these custom SUV’s like this I’m a professional in this.

@juanluissandoval506

5 жыл бұрын

Do you have a video

@stevebooth9803

5 жыл бұрын

Everyone's a professional these days

@jmaxim80

5 жыл бұрын

you can say that again steve

Just to be clear do not use the tintable kit to do any part of your project black, reason is no how much black tint you use, it's going to come out grey. If you want black, just buy black

Mr gunman, I have a challenge for you. Paint some shit with your left hand! Do you accept this challenge?

I'm so glad I went with line x... I would have regret putting raptor on my bed.

@stuntmantravis84

4 жыл бұрын

Why?

Can I get a heart? ❤️

@TheGunmanChannel

5 жыл бұрын

Ok

@SRVRarjay

5 жыл бұрын

Oh damn bro! You gave me a heart

I have no idea what you were trying to show here other than trying new shit on video

no1 on KZread