Review of a dremel router platform for your modeling needs! www.randomplatypus.com
Жүктеу.....
Пікірлер: 48
@galaga00 Жыл бұрын
I just needed to see this used in a very basic, overview way. It served my purposes and everyone else can piss off about the lighting and the swearing. Thanks for the video.
@backthebadge40095 жыл бұрын
Wow just turn the lights on
@TheZogsvengali2 ай бұрын
Thanks this video helped me. I was about to send it back. Dremel owes you a commission.
@brianames30743 жыл бұрын
This was kinda exactly the info was looking for, but damn dude... turn the lights on.
@raeloupied61933 жыл бұрын
Lol. “Clamp that F**ker down” 😲
@alanrobertson77624 жыл бұрын
Proper preparation prevents piss poor performance
@charliey55465 жыл бұрын
Thanks for this video. I have the dremel 4000 and I recently purchased some router bits and now I need a router table. I do small building jobs using pallet wood. Iv never used a router before on any of my builds I wanna start but I need a router table. I believe this table will be perfect for what I need it for.
@jlittsey62436 жыл бұрын
well, first thing I would do is use a longer piece of wood to mount it so the clamps didn’t get in the way. Also what wood sizes have you tested with this accessory
@nwgts4376 жыл бұрын
Do you think this could be used as a sort of scroll saw cutting tool for cutting curves in2-4mm ABS sheets? I’m referring to using it without the guide certainly.
@jed2055 Жыл бұрын
All good info boss but try lighting other than the 60watt bulb you used here 😎
@becks73943 жыл бұрын
Thank you for this. my first use I about shot a resin blank through my sliding door. O_o
@raysmith294021 сағат бұрын
where was this made, in an underground vault?
@raulacevedo-esteves94933 жыл бұрын
Will it work on a 1" thick plank?
@saeed68113 жыл бұрын
Is this a disco light review or?
@silver115946 жыл бұрын
Why are you filming this with a flashlight?
@edwardcharles9764
6 жыл бұрын
silver11594 because the lighting in his workshop is too low for the camera to record. He's wearing a head torch to highlight the areas he's referring to so the camera can pick it up.
@JNoutdoors6526 жыл бұрын
if you´re gonna do a review please buy a decent lamp and a decent camera, otherwise a good review
@debigotowka34754 жыл бұрын
I laughed through this one! It was so entertaining... However, I'm going to search for a better more informative video, this one didn't meet my needs.
@acolon4617 Жыл бұрын
Wow, dude, you need brighter and more light in your shop! I pray you don’t work power tools in that lighting.
@TL-kl9im5 жыл бұрын
Its pretty standard to have a good lighting when doing some video -_-
@automatacasa81104 жыл бұрын
First time I’ve seen a review using a flashlight lol 😂... I couldn’t pay attention but good try on the review just couldn’t see much
@VicT9925 жыл бұрын
Just one question, why Random Platypus? You're an American and a Platypus is Australian. :P
@RandomPlatypus
5 жыл бұрын
It's a long story, but the short version is it came from a comment on a forum a few years ago 'random platitudes' which then somehow became random platypus. Also, random platypus is a community - a forum community, with people from all over the world. USA, UK, Germany, Italy, Finland etc, truly a very international collection of like minded friends. This vid seems to be somewhat of a one off for us!
@edwardcharles9764
5 жыл бұрын
Nikki Whelan "this vid is a one off for us". Another reason to be random!
@RandomPlatypus
5 жыл бұрын
Yeah! Totally! We might do more at some point - but we're model makers and painters really so it's not so common for us to review tools. Tempting to do more now though!
@VicT992
5 жыл бұрын
edward charles lol well its a pretty good one-off 😉
@VicT992
5 жыл бұрын
Random Platypus that's a good enough reason! Randomness is awesomeness 😊
@richardkoch87522 жыл бұрын
Buy some lighting!!!
@jvitzu Жыл бұрын
You're really bogging down that motor. Not good for the tools longevity.
@coolrayfruge3 жыл бұрын
Your suppose to screw it to the side of a work bench or table. so you don't need the clamps.
@galaga00
Жыл бұрын
He's using an alternative method which is also suggested in the manual to make the tool portable. His clamping issue would be fixed with a longer board.
@RandyCooper852 жыл бұрын
Couldn't get past the poor lighting.
@email2beta6 жыл бұрын
very poor video quality
@tomberkley5888 Жыл бұрын
Why post something shot in the dark? Useless, sorry.
@christopherstaton8940 Жыл бұрын
Not very good at demo's are you.
@Doggieman11113 ай бұрын
Shite video, even for 7 years ago
@you-tubejunkie29266 жыл бұрын
After watching this video..... Thumbs down on everything dremel. 👎
@HJKelley47
5 жыл бұрын
Please don't blame Dremel for what you see in this video.
@regenafillinger40803 жыл бұрын
Could do without the F word...
@jed2055
Жыл бұрын
Yeah, I'm not into random cussing either, especially with chance of kids passing me by at this PC. Hmm.
@gabrielbotha4223 ай бұрын
Stop the swearing. Totally unnecessary. I will not watch more of your videos.
Пікірлер: 48
I just needed to see this used in a very basic, overview way. It served my purposes and everyone else can piss off about the lighting and the swearing. Thanks for the video.
Wow just turn the lights on
Thanks this video helped me. I was about to send it back. Dremel owes you a commission.
This was kinda exactly the info was looking for, but damn dude... turn the lights on.
Lol. “Clamp that F**ker down” 😲
Proper preparation prevents piss poor performance
Thanks for this video. I have the dremel 4000 and I recently purchased some router bits and now I need a router table. I do small building jobs using pallet wood. Iv never used a router before on any of my builds I wanna start but I need a router table. I believe this table will be perfect for what I need it for.
well, first thing I would do is use a longer piece of wood to mount it so the clamps didn’t get in the way. Also what wood sizes have you tested with this accessory
Do you think this could be used as a sort of scroll saw cutting tool for cutting curves in2-4mm ABS sheets? I’m referring to using it without the guide certainly.
All good info boss but try lighting other than the 60watt bulb you used here 😎
Thank you for this. my first use I about shot a resin blank through my sliding door. O_o
where was this made, in an underground vault?
Will it work on a 1" thick plank?
Is this a disco light review or?
Why are you filming this with a flashlight?
@edwardcharles9764
6 жыл бұрын
silver11594 because the lighting in his workshop is too low for the camera to record. He's wearing a head torch to highlight the areas he's referring to so the camera can pick it up.
if you´re gonna do a review please buy a decent lamp and a decent camera, otherwise a good review
I laughed through this one! It was so entertaining... However, I'm going to search for a better more informative video, this one didn't meet my needs.
Wow, dude, you need brighter and more light in your shop! I pray you don’t work power tools in that lighting.
Its pretty standard to have a good lighting when doing some video -_-
First time I’ve seen a review using a flashlight lol 😂... I couldn’t pay attention but good try on the review just couldn’t see much
Just one question, why Random Platypus? You're an American and a Platypus is Australian. :P
@RandomPlatypus
5 жыл бұрын
It's a long story, but the short version is it came from a comment on a forum a few years ago 'random platitudes' which then somehow became random platypus. Also, random platypus is a community - a forum community, with people from all over the world. USA, UK, Germany, Italy, Finland etc, truly a very international collection of like minded friends. This vid seems to be somewhat of a one off for us!
@edwardcharles9764
5 жыл бұрын
Nikki Whelan "this vid is a one off for us". Another reason to be random!
@RandomPlatypus
5 жыл бұрын
Yeah! Totally! We might do more at some point - but we're model makers and painters really so it's not so common for us to review tools. Tempting to do more now though!
@VicT992
5 жыл бұрын
edward charles lol well its a pretty good one-off 😉
@VicT992
5 жыл бұрын
Random Platypus that's a good enough reason! Randomness is awesomeness 😊
Buy some lighting!!!
You're really bogging down that motor. Not good for the tools longevity.
Your suppose to screw it to the side of a work bench or table. so you don't need the clamps.
@galaga00
Жыл бұрын
He's using an alternative method which is also suggested in the manual to make the tool portable. His clamping issue would be fixed with a longer board.
Couldn't get past the poor lighting.
very poor video quality
Why post something shot in the dark? Useless, sorry.
Not very good at demo's are you.
Shite video, even for 7 years ago
After watching this video..... Thumbs down on everything dremel. 👎
@HJKelley47
5 жыл бұрын
Please don't blame Dremel for what you see in this video.
Could do without the F word...
@jed2055
Жыл бұрын
Yeah, I'm not into random cussing either, especially with chance of kids passing me by at this PC. Hmm.
Stop the swearing. Totally unnecessary. I will not watch more of your videos.