Well made video, told me everything I needed to know in a nice non-Bs package! Cheers.

Purchased my first Dremel tool yesterday. The 4200. The plunge accessory has been recommended by other woodworks in my network so I am pleased to have come across your video. I also purchased the flex attachment but might return it & buy the plunge attachment. Immediate need is carving the stars for the American flags that I make. I hate using stencils & spray paint. Your presentation is amazing & very helpful. Thank you, sir!

After bagging on the nail I am so glad he pointed out exactly what I was thinking; easy to replace if lost. Thank you Dremmel so very much for not making it some unique piece we would have to buy. No need for greed like that with Dremmel. I am going to buy one of these

Clear and concise, thank you!

Brilliant review. I want one now!

Thanks for this help, I had no idea how to use some of those features!

Just have to browse this again to learn how to make use of the micro adjustment to cut deeper in a slot I need to do on a electric guitar built...

Glad I found your video. I don't use my Dremel nearly as much as I should. I've had that router attachment in my Amazon cart for months now. It's time to buy. Thanks again.

@KingBespokeCreations

4 ай бұрын

Good man, go make something 👍

I absolutely loved the screwy end parts phrase! Also great video thank you helped me alot if i should buy one

Thank you for this video. Very well explained and demonstrated.

@KingBespokeCreations

11 ай бұрын

Thank you 😊

Great review, I'm getting one.

FANTASTIC video. well explained, no fluff, straight into it! thank you so much!

@KingBespokeCreations

8 ай бұрын

Glad you found it useful 👍

Excellent video thank you.

@KingBespokeCreations

2 жыл бұрын

Glad you find it useful 👍

Great video, very helpful the way you took the time to show and explain. Thank you very much.

@KingBespokeCreations

Жыл бұрын

My pleasure 👍

Mine just arrived and watching your video is easier than reading the manual hahahahaa. Good video thanks.

@KingBespokeCreations

Жыл бұрын

😂 thanks. Enjoy!

That looks so ridiculously handy!

@KingBespokeCreations

2 жыл бұрын

And crazy cheap too!

Great video loved watching it.

@KingBespokeCreations

2 жыл бұрын

Thanks Jenn 👍

Thanks for the video, your style in explaining and demonstrating is so easy to learn from. I have been toying with the idea but now I'm going to get me one of those Dremel nails 😊

@KingBespokeCreations

2 жыл бұрын

They are the best nails! 😂

Wonderful information, and a beautiful presentation.

@KingBespokeCreations

9 ай бұрын

Thank you, glad I could help

Great video! Many thanks. It does look very useful for me, especially for the price.

@KingBespokeCreations

2 жыл бұрын

Thanks, hope it works well for you 👍

I've had one of these for about a year now, it's a great bit of kit and I've done a lot with it. Although, I must admit, user error on my part.. I never thought about going in "stages" to get a deeper cut. Makes sense really, now I know why my Dremel bits heat up and scores the wood. They say you learn something new every day.. Today I learned common sense with this kit lol. Thank you!

@KingBespokeCreations

Жыл бұрын

My pleasure, things are only obvious when you know! 👍

@FatLittleOldLady

Жыл бұрын

@@KingBespokeCreations I learned from 2 exes who were mechanics that if you have to force something you are doing it wrong. I saw someone reviewing some bits and going so deep and saying the bit was bad and I wanted to scream at them but I just let it go. They will learn because real Dremel bits are worth their weight in gold and expensive to replace.

I just wanna say thank you.

@KingBespokeCreations

5 ай бұрын

My pleasure 👍

I have had one for ages and had completely forgotten about it! Many thanks for your vídeo. I don't have to buy a Makita router, after all.

I bought one recently but haven’t used it yet. Thank you for the tutorial.

@KingBespokeCreations

Жыл бұрын

Hope you find it useful 👍

Great job on this one I like this one lot’s it teaches me so much thank you so much 😊

@KingBespokeCreations

Жыл бұрын

Glad I could help 👍

I own just about every dremel attachment out there except this one. Just done have that much a need for it yet. Got the circle cutter on prime day and getting the 8260 this week. I use a dremel lite a lot but my normal dremel is the 300 series still running great after 20+ years! But I’m hooked on cordless now. I know I’ll get this probably. Lol. Foredom down the road.

Thank you

@KingBespokeCreations

4 ай бұрын

👍

Hey Chris, thanks a lot. I have one of those and I like it.

@KingBespokeCreations

2 жыл бұрын

Great 👍

thanks for this, just picked one up after seeing this video. Mainly for engraving stuff so far, but I'm sure once I have it around I'll find plenty of uses for it.

@KingBespokeCreations

Жыл бұрын

There are many uses! But yes, most of my use is inlay work. 👍

Thank you. Love your personality and presentations explains everything without the hay dummy here's how you use this attitude some people have.

@KingBespokeCreations

2 жыл бұрын

Thanks, I’m a simple kind of guy!

Thank you for this very through introduction to the Dremel 335! The only part which I was missing from your video was showing how the feature copying collars work, but I think I'll investigate those myself!

@KingBespokeCreations

Жыл бұрын

I’ve got to leave you something! 😁👍

I've been thinking about getting one of these to use on some of my custom Victorinox Swiss army knife projects, to route in the tweezer, toothpick, and pen slots in the back of the Sambar stag scales that I have made... definitely looks very doable ! Thank you for the video !

@KingBespokeCreations

Жыл бұрын

My pleasure, sounds like you’ve got a plan!

I’m glad you made this vid. I was a little afraid of my plunge router. Also, I love your accent and vibe. 😃 Merry Xmas from California.

@KingBespokeCreations

Жыл бұрын

😁

Good video Chris. I abandoned mine to the depths of my workshop lair and started dreaming of stewmac one. After watching this, I will give it another go! Thanks

@KingBespokeCreations

2 жыл бұрын

Great, hope it goes well!

@carpo719

2 жыл бұрын

Thanks I've been wondering the same thing I just got one of these and I was afraid I should have got the stewmac one

@veguitars

2 жыл бұрын

Hi! this base works well if there is space. I find it limiting for instance for routing an inlay on a guitar headstock because the base collides with nut or fretboard. for this sth like the stew Mac one is better suited I believe.

Thank you! I’m learning soooo much about the dremel that I have owned for years, but sort of just let gather dust. Definitely going to take it out and start using it more often.

@KingBespokeCreations

2 жыл бұрын

That’s great!

@bingefox4056

Жыл бұрын

I did the same thing. Decided to take up power carving.

@wardcarolmary

Жыл бұрын

Your demo was excellent but I disagree with the flex comment..in my experience e it does tend to go off on its own!

Very appropriately named (numbered tool for someone who works on guitars )👍☺️👏 happy new year ...

@KingBespokeCreations

2 жыл бұрын

I did think about that! 👍😁🎸

I just got one and I'm excited to use it I would recommend somebody who wants one to order the light I didn't realize at the time but they have them specially for these bases. I made my own out of a small reading light. I'm trying to build guitars so this is a wonderful tool

@KingBespokeCreations

2 жыл бұрын

I’ll have to check out that light!

I've got one that I'm about to start using, which is why I watched this vlog, I can confirm that it works with other rotary tools and not just Dremel. I have a Tacklife one and it's pretty good

@KingBespokeCreations

2 жыл бұрын

That’s great to hear, thanks for that!

I bought a Router from Aldi many years ago and it has served me well. Now I'm retired and only fiddle about making small things for fun. I often use the trusty Dremel for various tasks. The little black one is okay but prone to moving off line and not so stable. Having seen this video I'm going to order one of these plungers for my Dremel as it looks pretty sturdy and a lot lighter than using a more commercial sized one. going to see what other videos you've done as I quite like the way you present them. Cheers

@KingBespokeCreations

Жыл бұрын

Thanks for that Richard. It does fill the gap Brilliantly between the big power router and cup stand! 👍

Great review, man. I just picked one up recently, and I just put it together and set it up this evening, but I am really impressed with the design and what you get for the price,... and I don't get to say that very often nowadays. Best of all, it fits the Harbor Freight Dremel knock-off no problem. Cheers, from Texas!

@KingBespokeCreations

2 жыл бұрын

Great! Glad I could help 👍

Ty for the links and a good video! I clicked on 3 diff videos before I found yours and they were a disaster. Tytyty

@KingBespokeCreations

Жыл бұрын

Glad I could help 👍

Great product review! Looks like a nice router base for the price. Too big unfortunately for instruments inlay but definitely would have its place in furniture to create inlay channels and edge routings.

@KingBespokeCreations

2 жыл бұрын

Thanks Tomy. I’ve used it on guitar fretboards for inlay. The light weight makes a huge difference!

Many thanks, it was very informative, and a clever use of the circle cutting tool. The presence of an "Almighty Dremel Nail" in the pack makes it worth the cost lol. Subscribed btw, this channel looks interesting 👍🏻

Thank you. Very informative very funny. Best video on plunge router. Instructions from Dremel must have been written using the Enigma machine not helpful as a first time user!!

@KingBespokeCreations

Жыл бұрын

It always take a few goes to really figure it out! 👍

Perfect for a few larger, and tinier inlays, say on a bass fretboard

@KingBespokeCreations

2 жыл бұрын

Funnily enough, I was thinking the same thing!

"The Almighty Dremel nail" LoooL subbed

@KingBespokeCreations

2 жыл бұрын

👍

@imarmite9846

2 жыл бұрын

@@KingBespokeCreations I just got a Platinum Edition 4250 for Fathers Day, really looking forward to getting into a bit of power carving with it

@KingBespokeCreations

2 жыл бұрын

@@imarmite9846 nice!

For info the Millwaukee 'dremel ' fits too 😉

@KingBespokeCreations

11 ай бұрын

👍

¡Ándale, tú sí sabes campeón! Gracias 😎

@KingBespokeCreations

6 ай бұрын

👍

I had one of those. Tried using it for an inlay but found the plastic bits a little fiddly. Ended up selling it and getting a Stewmac precision router base instead. To be fair, the Stewmac base costs quite a bit more and it doesn't plunge, so depending on what you need to do and how you use it, the Dremel base may be a useful option.

@KingBespokeCreations

2 жыл бұрын

It took a bit of getting used to, how to set the depth stop etc. but worth it.

Just got my Dremel plunge router attachment yesterday to specifically cut out a partial circle/square for hinges in bathroom vanity doors. Tried (key word) a couple yesterday and there was so much wood dust that I stopped being able to see the pattern that I had written in ink on the door. Wish it had a vacuum attachment.

@KingBespokeCreations

3 ай бұрын

I put a flap of masking tape on the cutter shaft. It acts as a little fan, clearing the visible surface as you go 👍

@dawnpatrolgolf

3 ай бұрын

@@KingBespokeCreations Hmmmm. I will have to give that a try. Thank you.

Mine lasted 2 months. The knob for tightening it and keeping it at the depth you want it at striped and shortly after, the nuts that the knob screwd into came right out of the whole thing.

@KingBespokeCreations

2 жыл бұрын

Oh dear…

Oh I got all excited about this attachment only to realise it is not compatible with my dremel 7760, sad :( Loved the video though, really appreciated the demonstration, as I wouldn't have a clue how to set it up and use it 😅

Thank you for the review and sharing with us. I believe, “Our World is a Shared Experience”"… Remember, *_Life_* is *_Short_* so, *_Live Long_* and *_Prosper_* … 🖖🖖🖖 See you either here or in my Channel soon… Cheers…

Thanks for the info….Perhaps next a video to demonstrate more practical use of it, a bit more user detail, tips and techniques that kinda thing. Not that the presentation was bad, however we might like to see those guide bushes in action, inlay work, more sign writing practice and a demonstration of pattern bit use. Plus, how much the tool bogs under load and ease of use etc.

🌟✨Do you have a Dremel? What’s your best accessory? ✨🌟

@Scion4600

2 жыл бұрын

For me it's the wand extension. I use it for the occasional lettering and fret polishing. I made my own router base with screws and nuts, but the adjustment is painfully slow, and the nuts tend to vibrate loose. I'll have to pick one of these up soon.

@KingBespokeCreations

2 жыл бұрын

@@Scion4600 I was thinking the same thing, glad I got my hands one!

@luvdady

2 жыл бұрын

The hammering is about the only drawback that I know of. Yeah after a few times it don't want to go... But oh well...

I like your videos: good and funny!!! I have many Dremel attachments, and I REALLY like them. Except for the router attachment: If you plunge less than 0.25 mm at the time it's ok. More and you get a bad result. If I have to buy it now, I will NOT. It was money NOT well spent. This attachment is in a cabinet for more than 2 years and I certainly will never use it anymore...

@KingBespokeCreations

Жыл бұрын

It’s certainly one for delicate detail cutting. I use it quite a lot for inlaying. 👍

Thanks for a video! Have you also maybe tried Dremel Router table as well?

@KingBespokeCreations

4 ай бұрын

I haven’t. Worth a look though 👍

@lukapavlesic7610

4 ай бұрын

@@KingBespokeCreations I would mostly just do edges on router - either rounding them up or down so thats why I am thinking of getting Router table. But in your video I saw that you managed to do edges pretty well with plunger so not sure which one to get

@KingBespokeCreations

4 ай бұрын

@@lukapavlesic7610 because it’s a light package, I’d go with the rougher base rather than the table if I was to have only one. You’ll have more uses out of the base I think.

@lukapavlesic7610

4 ай бұрын

@@KingBespokeCreations Thank you! I wouldnt be surprised if I end up buying both in some time but dont want to just buy everything at once and end up not having enough time to use then haha

I gave around $45.00 I think. Just got it today along with some little pieces of wood. Thanks for the tutorial. I have the Dremel 4300 that comes in the big blue box. Bought one for my neighbor, too because the druggies stole all his tools right out of his shop. He's in his 60s. A thing like that could kill a man. You know? I'll share the plunge router. Maybe get him one for his Birthday. I got the multi-vise, too. I have more bits than most guys, probably, and I used to use mine for crafts, but now I have to be careful and just use it to fix things around the house.

@KingBespokeCreations

Жыл бұрын

What a great gesture. Well done, and look after yourself too 👍

@FatLittleOldLady

Жыл бұрын

@@KingBespokeCreations Thanks. I do. By the way, I meant to tell you the way you just whipped off your logo like it was nothing was remarkably impressive. I just assumed you knew that, but it is still good to mention.

@KingBespokeCreations

Жыл бұрын

@@FatLittleOldLady ☺️👍🙏🏻

HAHAHA! Useful and hilarious, thanks!

@KingBespokeCreations

Жыл бұрын

👍😁🤘

I was impressed with the way you carved out your logo. Was that freehand or do you have a template? Thanks for the demo!

@KingBespokeCreations

11 ай бұрын

Free hand. I like to cut around the edge with a knife first, then remove the middle with the Dremel. 👍

Thank you Chris. finally I understand how to use this base. Do you think it would go deep enough to route for instance a pickup cavity?( of course in several passes) Cheers V

@KingBespokeCreations

2 жыл бұрын

The issue would be the length of the router bit I think.

Can you get a universal one

Just bought both of these. The router bits are tiny, with limited applications. Is it possible to buy bigger router bits, or is this it? Oh, great demo by the way.

@KingBespokeCreations

7 ай бұрын

They do a range of bits but nothing massive 👍

Nice review covering most aspects. Unfortunately no reference made to the speed the Dremel needs to be set at for the various jobs!

@KingBespokeCreations

Жыл бұрын

That’s because I always whack it on full! Get the Dremel app for super quick reference 👍

Very useful video. I am new to woodworking and this was very handy. Did anybody find a 1/8" flushed trim bit with a ball bearing at the tip? I've been looking for it for a week now and it seems it does not exists!

@KingBespokeCreations

Жыл бұрын

I’ve not seen one for this size

@Lordenzus

Жыл бұрын

@@KingBespokeCreations It seems I will have to buy a palm router. What a disgrace, another tool! 🤣

Hi there. Thanks for the really informative video. Would this setup be precise enough to use for routing out inlays on guitar fretboards?

@KingBespokeCreations

2 жыл бұрын

That’s exactly what I use it for! 👍

@shirleylarkan5654

2 жыл бұрын

@@KingBespokeCreations Cheers, appreciate the advice.

Can't seem to find an answer. Got the 4300 and trying to mount it into the 335-01. The Dremel website says it's compatible but the shape/threaded nose just does not seem to fit!

@KingBespokeCreations

Жыл бұрын

How strange?

My multi tool cutter springy thing gets all twisted :(. I think it’s just an Amazon screw up though. Either way gotta get a replacement

@KingBespokeCreations

2 жыл бұрын

👍

I'm new to Dremels, but this thing has been great. kzread.infoUgkxfPgcZ5_Cl0HDUKkMJAKde11YKQZVgMoR The variable speed is awesome and the cordless aspect makes it so easy to work with. I am constantly finding uses for it that make tasks easier. Recently I put in a new deadbolt on one of our doors. I knew I had to enlarge the hold where the deadbolt goes into the door frame. At first I thought I would have to get a big router and figure out how to use it for that, but then I rermembered we have the dremel. I was able to enlarge the hole almost as easy as if I was drawing with a pen. It's also great for grinding our dog's nails done and so many other household tasks.

How did you do the tips on your logo’s crown? A separate bit?

@KingBespokeCreations

7 ай бұрын

A knife or chisel to get into the corners 👍

@teegees

7 ай бұрын

Ah.. got it: )@@KingBespokeCreations

Fantastic! This should work with Milwaukee tool right?

@KingBespokeCreations

Жыл бұрын

If it’s the same thread, I imagine it would.

Can the bits be use for pvc trim?

@KingBespokeCreations

Жыл бұрын

Yes

I was thinking, this would be quite useful for trimming worktop laminate, because it's so lightweight. But not sure if they do the correct bit?

@KingBespokeCreations

Жыл бұрын

There is a pack of different Dremel router bits you can buy 👍

@victor9501

Жыл бұрын

@@KingBespokeCreations Wow, instant reply! Ok, thanks. It's either that, or my little 1/4" router... Also, just realised, it's easy to size router bits, they're either 1/2", 1/4", or 1/8" (Dremel size)...

Hi there. Great review but I would like to know if this will fit the Dremel 3000, as my wife bought me the 3000 and I want to use it for light work such as hifi speaker building and guitar making etc.

@KingBespokeCreations

2 жыл бұрын

It’s the 3000 I currently use. So yes it fits perfectly!

@steverees1936

2 жыл бұрын

@@KingBespokeCreations that's grand. Thanks for the reply mate.

can you get a bushing to trace around an inlay template?

@bradleysykes6731

Жыл бұрын

It comes with two different sized bushes/collars although that said it might just be one bush with a lock ring.... you can mount them on it to follow a template. I just got mine today and it seems pretty good for the money. Hope this helps.

@bradleysykes6731

Жыл бұрын

Go to 2.58 and this is the parts I was on about.

I just need to cut grooves. This video showed me this isn't the right tool for me, lol.

Will any generic rotary tool fit this jig? I have a few different òff brand tools already I don't want to have to buy another one just to use this?

@KingBespokeCreations

5 ай бұрын

It attaches using the thread that would normally house the collar.

@mikeyoung5329

5 ай бұрын

@@KingBespokeCreations okay I think that makes sence ill have to pull mine out of the closet and see if my collar is removable on either unit. Thank you for the quick response and great video 🍻 do you think in general all collar threads for rotary tools would be close if not the same? As long as it's a 1/8th chuck?

@KingBespokeCreations

5 ай бұрын

@@mikeyoung5329 it would make sense, but would need checking.

Hi. Can this plunge fit on non dremel die grinder?.

@KingBespokeCreations

Жыл бұрын

It uses the thread on the Dremel to attach, so if your tool has the same thread collar it might do

@mhdzakimlr7573

Жыл бұрын

@@KingBespokeCreations i see. did you know the diameter size of the thread?.

Is that a soft wood your using?

@KingBespokeCreations

9 ай бұрын

Yes I believe it was. But it would do the same on hardwood too.

@Anonymous-is2qb

9 ай бұрын

@@KingBespokeCreations thanks

Does it fit other makes of multi tool other than Dremel, Chris?😳

@KingBespokeCreations

2 жыл бұрын

It screws on the large thread at the end. So if another make has that same thread (probably unlikely) it should fit.

use only dremel nails! They're only $3.95 and come in a nice molded plastic case so you won't lose it.

@KingBespokeCreations

Жыл бұрын

😂

LOL, why not just change direction to stop the dragging, experts hahaha.

A Dremel nail not a jimmy nail 😂

@KingBespokeCreations

Жыл бұрын

“Crocodile shoe oo oos” 😂

Can this model actually cut a circle in a piece of wood 10-20mm thick or it will struggle? I haven't seen a youtube reviewer put any of these tools to work instead they talk.

@KingBespokeCreations

2 жыл бұрын

Yes it would, but not in one go. But I would cut that thick with a full power router in one pass either. This isn’t meant to replace your big router, rather add to the capability of your precision Dremel

@Sir-Kay

2 жыл бұрын

@@KingBespokeCreations Why was the router attachment designed and numerous picture put out there that it can cut circles and shaped in woods when in actuality it can't? don't you feel we've been bamboozled and the whole Dremel thing is just one huge joke?

@KingBespokeCreations

2 жыл бұрын

@@Sir-Kay not at all. It can do those things. But it has a area of expertise. You could cut tree branches down with a dovetail saw, but you wouldn’t. It doesn’t make the dovetail saw useless.

@Sir-Kay

2 жыл бұрын

@@KingBespokeCreations Answering this simple questions with other analogy especially tools not everybody is familiar with is not right. I'm talking about This particular Dremel 8220 here. Why is a router attachment added in the package when it can't really cut through 10mm-20mm thick softwood and plywood? I've not been able to find any video where this is demonstrated on the world wide web, and if so, can I have the link? I'm starting to see this Dremel things as a collectioners item almost like an artpiece people brag about but, it can't really do anything other than cut cartons.

@KingBespokeCreations

2 жыл бұрын

So don’t buy one. But may I recommend not trying to cut 20mm thick anything in one pass with any router.

I just brought one. What a piece of crap. So much play in the two vertical guides post which makes the cutter wander. 👎

@KingBespokeCreations

10 ай бұрын

Sorry to hear that, certainly didn’t have those issues with mine. Make sure everything is nipped up, if you think it’s a fault, contact Dremel.

These thumbnail poses are getting out of hand...I mean,..really,...really?..🤔(at risk of sounding stereotypical,..woodshed is for manly types...these looks of suprise/speculation a little sickening tbh😳 🤢)

@KingBespokeCreations

Жыл бұрын

Welcome to KZread!

@ericsanders5357

Жыл бұрын

@@KingBespokeCreations ..think I'll go read a book(on my Kindle, of course)

No Dremel for me!!!! The presenter use the Name of Jesus as a pease of junk, cause that is what is in him. A pin isn't almighty........

❤🧡💛💚💙💜🖤🤍❣❤🧡💛💚💙💜🤎🖤🤍❣❤🧡💛💚💙💜🤎🖤🤍❣🖤🤎💛💙💋

Really good, easy to follow vlog. I'm a newbie to woodworking but just built hubby bar for his birthday & really want to try more. Bought this Dremel router for signs & finishing

@KingBespokeCreations

2 жыл бұрын

That’s awesome! I love it when people get hooked! Lots of tips and techniques on this channel 👍