U are a legend man i was watching ur video with the random tab opening and closing by itself i somehow opened my monitor i cut the cables and now it doesnt bug like that thanks a lot u deserve a like and a subscribe♥

Omgosh finally fixed my issue! I took the monitor apart, pried the buttons out, and wa-la! After months of dealing with the pop up, it is fixed.

dude, YOU realy helped me, while the menu kept poping up I JUST SNIP THE BUTTON 3 times HARD with my fingernail, and the menu stopped coming, THX alot

i dont know how to thank you enought i was just to spend 200€ on new monitor when i try your method to remove display plate and adjuct it with software...this is perfect so THANK YOU from Croatia !!!!!!

@TeckDrivenTeck

Жыл бұрын

Happy to help :)

Great stuff. This fix worked for me. :)

Thanks for the Video, was an an easy fix, just removed the button bar and it works perfectly fine.

@JusunmanuelPA

3 жыл бұрын

how do you turn on and off the monitor without the buttons bar?

@carlosomse

3 жыл бұрын

@@JusunmanuelPA you just leave it on before you unplug it, then it automatically turns on if you plug it in again. When your computer is off the Monitor goes into standby pretty quickly

@zlatanibrahim0vic10

2 жыл бұрын

How did you remove

This video is a life saver man.... U explained in really well... 😉🥰

thank u very much for the exact solution sir! from india

Your videos are great. :) I have a 20" Samsung Syncmaster 2032BW monitor. Today when I turned it on, although it showed an image, it constantly showed the MagicBright items being selected automatically one by one without stopping (affecting the brightness of the image as you might expect), other times it did the same thing but with the items in the main OSD menu itself, and other times it also did the same thing when the monitor was detecting the mode, whether digital or analog, sometimes choosing one and then choosing the other! In other words, it seems to me that it goes into a loop (sometimes for quite a few time) within the option that is active, be it the OSD Main Menu, the MagicBright menu or even when detecting the mode (whether analog or digital). Another thing that sometimes happens (but doesn't affect the image) is the blue color of the power button, some days it's on, other days it flashes, and some days it doesn't even light up, even though I can turn the monitor on! Can you give me any clues as to what could be causing this problem with the monitor? Many many thanks.

I finally found a substantive explanation, guessing that in my case it might be button(s) without a huge amount of additional and unrelated bullshit ^^ Thank you for explaining possible causes and ways to fix it :) Well, now I can just disassemble it 👌

New sub, great stuff my friend

Thank you man !

I have this with an LG monitor. I live in Spain, humidity is high very often. When the humidity is around 70%rH or more, the OSD randomly pops up. As soon as my space is ventilated, the humidity drops and the OSD stops popping up on its own. Averagely, 65%rH is low enough to prevent this problem. I tried removing the control panel, it made no difference, I'm quite certain humidity is a factor. It's worth getting a cheap hygrometer and put it near your PC equipment for easy monitoring (no pun intended).

thanks a lot for this, I was going crazy with that thing. I just remove the button from it. I wish it gonna work without delete all those buttons. Kiss from France

Same problem here, the brightness thingy randomly pops up on my screen and even if i hit menu to exit, it still stays there, is there a way to disable it using the settings?

Watching this video with my input menu right in the middle of the screen. Gonna give this a shot!

@TeckDrivenTeck

4 жыл бұрын

Like I mentioned in the video, another option is just to unplug the buttons control board and it works without it connected

@ancientgeek3834

3 жыл бұрын

@@TeckDrivenTeck Thats what I ended up doing, saw some corrosion and cleaned it up, popped it back in, and it works great! Thanks for the tutorial!

Thanks a lot lot lot man 👍

bro thank you very much it helped me alot its saved my 2800 rs

I have an LG flatron monitor which popped up randomly the menu on and off randomly and rapidly, so I plugged out the side buttons, but no success. Then the power started going on and off randomly... which was much more irritating. So I checked again and an SMD diode on the power button board was blown. Soldering another one from another power button board or any kind from a less than 5V device will do the trick. I hope this helps some people

@VanjaTrikic

2 жыл бұрын

I have the same monitor lol

Yep, had the same on Benq LCD monitor - fixed by sticking the Menu button in place with a tape

@EDDITIONvalorant

3 жыл бұрын

i have a benq xl2540. can you help?

@johnpfeil4179

2 жыл бұрын

holy fucking shit. thank you for solving my problem in literally 2 fucking seconds.

@coffeebreakhero3743

Жыл бұрын

OMG this works for my new ex2710u! stupid buttons

@snowcake2846

Жыл бұрын

What type of tape did you use btw 😮

it took 5 minutes to remove the panel, and get rid of the issue. Thanks.

thank you a lot!!!

can i just break it?

@ZanderMGanaden

Жыл бұрын

Lol i want to do that aswell but i dont want to since my parents are near and might get mad

The monitor will be good if i just took out the button board and i just connect the wires in to each other?

I have this exact problem, thanks

I have an LG Flatron monitor. The PCB for the buttons is separate with power button PCB and is connected after the power with cables. I removed them and still the menu keeps popping up :/

Punching it really really helped me

@macho077

2 жыл бұрын

I punched the buttons couple of time it works 🤣

@dhruvagarwal4356

2 жыл бұрын

Naah I tried it many times then searched on YT

@callojohndarrielr.4694

2 жыл бұрын

dude it fucking work on mine, I was about to open it up and cut some wires until I saw your comment hahaha

I have a Acer 1715b little lcd monitor and i found that only pushing both DOWN and power buttons i can turn the screen on and off?? The Power button and all the others dont seem to work alone and i had this apart and cleaned and checked the little board and main board and pins ect and nothing is shorted. I guessing a corrupted main chip or firmware? Other wise the screen works 100% when you give it the input, it goes green and turns on and amber when input stops. I might have to use a third party program to change brightness as the menu buttons dont work to adjust brightness. This is from 2005 and changed all the PS caps as picture looks great and may still have plenty of use in it. I love to get into the service menu to find out how many hours this has had but dont know code for front panel and buttons wouldnt work anyway! haha.

Thanks about to try it! :)

@TeckDrivenTeck

3 жыл бұрын

Did it work?

@Target_edge

3 жыл бұрын

Not really i switched monitors though

I had same problems... Brightness menu pops up and can't be exit. What I did... I resolder every point on this board(capacitors, resistors and buttons) with small solder gun. Of coarse I removed this board out of case. I also open one button and reassemble it(this was unnecessary).

Where can i buy this panel,sir please tell me what is the price 🙏

what do u think could be a possible cause of this, because im currently experiencing one on my lg flatron (E1941). is it because the monitor is always on? or just too old?

@TeckDrivenTeck

2 жыл бұрын

Old age. Most of the time it is caused by bulging capacitors.

Is it possible to disable the buttons from the Windows instead of disconnecting the board?

watching this video with settings popping up on my screen

I was able to fix mine. All I did was buy some small PCB buttons from Amazon, take apart the monitor, remove the bad button and solder on a new one.

@Aiden-fk6xj

2 жыл бұрын

that sounds way to difficult

@trevboy98

2 жыл бұрын

@@Aiden-fk6xj not really if you know how to solder

@Aiden-fk6xj

2 жыл бұрын

@@trevboy98 i dont 😂

@r.d.xanimeguys2239

2 жыл бұрын

@@Aiden-fk6xj what is solder

monitor Acer osd menu keeps popping up. What is the problem ?

i get the same thing might try it

Can i ask what button did u remove, button for menu?, or did u entirely remove the board of the buttons? Asap and thank you in advance for the answer

@TeckDrivenTeck

2 жыл бұрын

At the end I just disconnected the entire board. I resolved one button but another started to act up so I disconnected the entire board and now it is working with no issues for months

How does the switch go bad if you never use them?

@NightlyFr

Ай бұрын

Well here's your 2 years late reply it's because of dust a debris

@evan4856

Ай бұрын

@@NightlyFrso how does dust and debris get in the switch if it was never really used to get any dust inside? Also I ended up breaking the button to try and disable it and it didn’t work. I powered it off and unplugged it for a while and it worked for a while then started doing it again.

thank you! i will give a try to just turn it off my monitor is sooo old that the are no replacements, it stop for about a year doing this after i upgrade to win 10 but when win 11 came out it started acting up again so i think it is softwere for me but i will give this a try to i am stick and tired of waching it bling up all the time to the point that i turn off power from my pc when i turn it off.

If I put out the button board, then how to turn it on without the power button?

It's happening now with my Asus monitor too. It's probably 2-3 years of age now. The blue light filter settings keep popping up on the lower right side of my screen then when I do a long press in 1 button in the monitor, it will disappear in short period of time then will resume again. Can you recommend an action for this?

@TeckDrivenTeck

2 жыл бұрын

I would try disconnecting the buttons and check the capacitors to see if it is the button or capacitor that is failing. Disconnecting the buttons usually helps

having this same issue with the menu button for a while and it really bugs me off!

@TeckDrivenTeck

4 жыл бұрын

I fixed one button then after few weeks a second button started giving me issues. I turned the monitor on and unpluged the entire switch assembly and no more issues

@noelsalazar7989

4 жыл бұрын

@@TeckDrivenTeck that's a good idea. I'll just unplug the switch assembly. they're actually useless for me. I don't remember using them except the first time when I brought it. haha.

2 notches on the bottom is already opened but I cant open the entire panel.. Help please.. My monitor is HP ProDisplay P221

It would stop if I had it pointing up so I just got some tape so it would stay up and now it stopped idk if this is a good way to do it buts it's easier and faster then taking it apart

My PA278QV just started doing this

What I've done is made its transparency max and timeout 5sec min Not a fix but it is still a relief

@F1chandu

3 жыл бұрын

How there is no control panel for it , that itself control panel

If you're genuinely pissed off, just take a screwdriver and scrape out those pesky buttons.

danke

I disconnect the switch and I test it. Still moving and pop ing by itself. Idk what should I do next

Mostly, stick buttons, do a bit of dismantling , clean them thoroughly, assemble again, and you should be ok

Hey, there is something that has written dcr insid a rectangle shape with X shape on it is popping up on the middle of my screen every minute what will i do to get rid of that pleasssssssse help me

@vishnukverma

2 жыл бұрын

Someone please help me 🙏

Hi my main output of my pc is supposed to be vga but right now im using dvi as temporary. I can't change dvi to vga since the buttons of my monitor is broken. Should I buy a new one or get it fixed? Thx.

@TeckDrivenTeck

2 жыл бұрын

It depends on how old the monitor is. If it is old i would just buy a new one. Even the chepest new monitors are fairly better then old ones. My rule of thumb is 5 years old replace it if it is not a easy fix

@carleah8401

2 жыл бұрын

@@TeckDrivenTeck ooooo okieee thankyouuuu so much!! :)

How do I stop Fn hotkeys and osd from popping up every time I press the caps lock button?

@TeckDrivenTeck

2 жыл бұрын

Most likely your keyboard has some kind of fault or debri the makes it stick

@ThierryRocksTV

2 жыл бұрын

@@TeckDrivenTeck Not sure it's safe to pull the keys off mine.

@TeckDrivenTeck

2 жыл бұрын

@@ThierryRocksTV if it only pops up when you press a button then it is likely that removng keys may not work. Osd on monitor should not be related to Caps lock. You would need to fimd out why it does that when pressing a key first before removing any keys

Same problem with my monitor can i deassemble buttons

@TeckDrivenTeck

3 жыл бұрын

I found that the easiest solution is just to disconnect the buttons board, and it works on most monitors with this issue

@sai-yq8pw

3 жыл бұрын

@@TeckDrivenTeck ok i will do it TNQ

But how will the screen power on without a power on switch and the screen switches off as soon as I plugg out the power cable

@TeckDrivenTeck

2 жыл бұрын

Turn the screen on. Then unplug the power from back for about 30 seconds and plug it back in. If the screen comes on. That means the monitor keeps memory as too what state it was last. Monitors tend to stay on once you turn them on they just go to sleep when you are not using it

@gnajor

2 жыл бұрын

@@TeckDrivenTeck Thank you so much for the tip it works now without a problem. You have earned your self a like

I just got one one that keeps doing this! An ASUS monitor. The buttons are all cleaned and not sticking. Really annoying.

my lenovo monitor keeps beeping turning off and saying power off and mute on randomly and turning off

@TeckDrivenTeck

3 жыл бұрын

It is posible that there is something with the button's but i would also check capacitors to see if any of them are bulging

the monitor still work then i happy with that

Hey man I have this issue I disconnected the buttons As you said but it's still popping up PLEASE HELP ME

@TeckDrivenTeck

2 жыл бұрын

It can also be the main Logic Board. Sometimes the capacitors go bad (they bulge) and can make the monitor to do strange things.

I got this problem on my samsung SyncMaster F2380. Disconnecting the menu PCB was my solution 2 years ago. I wanted to restore the buttons & OSD menu today and, after removing the glue from the scotch used by the manufacturer, everything is working correctly. That is... For now, I suspect the scotch's glue to interfere with the electronics (maybe it was acting like capacitor and was starting to conduct electricity) and was the cause of this problem :/ Edit: not a glue/scotch problem : the problem appair again (less frequently). However, the power led is less bright, and is strangely blinking (should be always on when screen is on). Probably a capacitor failing in the control unit :/

@TeckDrivenTeck

2 жыл бұрын

Most of the time it is because of rust or degrading buttons over long time and capacitors failing, sometime both.

hi sir, i have this problem, you brightness indicator, but im volume sir.

@TeckDrivenTeck

4 жыл бұрын

Like i mentioned ot the middle of the video, the easeast solution is to unplug the entire switch assembly and it should fix the issue

@kevintimothy2697

4 жыл бұрын

@@TeckDrivenTeck Yes sir, but yesterday i go to service center in my place, and they also don't know what the problem is, haha. I only bought it for a month

@kevintimothy2697

4 жыл бұрын

Thankyou sir, true pcb button thats problem.

I have an issue, the external display options keep popping up for no reason (computer only, duplicate, extend, Projector). I have a presentation tomorrow. It would be really helpful if you couldn't answer

@TeckDrivenTeck

3 жыл бұрын

Is it on the display only or is it on the computer. Stuck keyboard key?

@nidhijay768

3 жыл бұрын

@@TeckDrivenTeck display only! I don't think it has got anything to do with the keys

@TeckDrivenTeck

3 жыл бұрын

@@nidhijay768 for some reason I think it is computer related. I just never seen a option to duplicate or extend option on the monitor it self. Try looking up the monitor menual to see if the moniotor even has that option that way you can isolate coputer from display

@nidhijay768

3 жыл бұрын

@@TeckDrivenTeck probably!! Yes I'll look into it. Thank you for trying to help me out with this.

is there anyway you can disable the buttons in your monitor?

@TeckDrivenTeck

3 жыл бұрын

The only way is to disconect it

@cedricnofuente6876

3 жыл бұрын

@@TeckDrivenTeck how?

@TeckDrivenTeck

3 жыл бұрын

@@cedricnofuente6876 open the monitor up and unplug the swich board for the button if it is not intergrated. But this will disable all buttons. Most monitors will remeber last state. So when you unplug it in on position. It should remeber without switches to stay on

pro tip. take long as knife or scizzors. destroy everything in button area through the gap between the two sides of the monitor. problem solved lol thank you for the video

Hallow sir I need your help can I only remove and not replace it can I do it need a ansor

@TeckDrivenTeck

3 жыл бұрын

Depends on the monitor, on some you can remove it and you will be fine on some it may give you a error. Best way to test it is to unplug the button board and see if the monitors will still function

@mtubelk1063

3 жыл бұрын

@@TeckDrivenTeck thanks that helps me

@mtubelk1063

3 жыл бұрын

@@TeckDrivenTeck thanks budy I remove the wire and now it solwed

Hello, if I unplug the control board, how will I turn on the monitor?

@TeckDrivenTeck

3 жыл бұрын

If you unpluged it from power when in was on, it should remember thet the monitor was on. And it will always be on. It wouldn just sleep when computer is in sleep mode or aff as well

@manrajkalirai7507

3 жыл бұрын

@@TeckDrivenTeck ahhh okok, i also have a switch on the back of my monitor for on and off. But if i constantly use that switch to turn my monitor off and on, do you think it will cause a problem? I think it might be like a switch to kill all power to the monitor.

@manrajkalirai7507

3 жыл бұрын

@@TeckDrivenTeck also, if i leave my monitor in sleep mode (deep sleep) forever, will it cause any harm or damage my monitor?

I get rid from popping control bar in the middle of the display but the brightness and contrast of the screen is on the higher side, almost maximum 100% which cause very bight washout picture, pls. suggest solution

@TeckDrivenTeck

3 жыл бұрын

Best solution is to leave your monitor off for a while to cool off. Then turn it on and adjust the settings, after that unplug from power. Then unplug the button bord from the monitor. That should prefent setting feom changing. Not the best sollution but it works

@prafulchawan7389

3 жыл бұрын

brightness and contrast option of keys are disabled and grayout so unable to adjust , is it any software problem

@TeckDrivenTeck

3 жыл бұрын

@@prafulchawan7389 most likely it is hardware problem. It detected a foult and it disabled it. Common problem is buldging capacitors on the main board that couse all differnt problems

Can my monitor work without that entire switch?

@TeckDrivenTeck

2 жыл бұрын

In most cases yes.

@ksss710

2 жыл бұрын

@@TeckDrivenTeck thank you very much for replying

wait now I cant turn my monitor on. windows sees it but I can't turn it on what do I do?

@TeckDrivenTeck

2 жыл бұрын

It needs to be turn on before you disconnect the buttons. The monitor should remeber the last state that it was on. After that it will go to sleep if not in use

basically you unplug the the button board and acer got monitor software anyway im cool with that

I have same problem. My LG LCD monitor fell down and now menu is popping up. I disconnected the button's board and I see same problem.

@TeckDrivenTeck

3 жыл бұрын

The problem seems to be with the main board, buttons bord is only a remote for the controls. Something is loose like a cap or chip

@sraros

3 жыл бұрын

Try removing completely BOTH power button and the side buttons (if separate boards). If it fixes it’s one of the boards. Otherwise you have to check or replace the motherboard

@TeckDrivenTeck

3 жыл бұрын

@@sraros That is correct, I would look on the motherboard to see if you have any bulging Capacitors. Caps can cause that problem as well.

having similar issues, so I simply get rid of all the buttons, so there will be no button to worry about anymore :/

@TeckDrivenTeck

3 жыл бұрын

In most cases these boards can usualy be disconnected

Is there any way to fix this without actually opening the monitor?

@TeckDrivenTeck

Жыл бұрын

Some people reported that spring little oil on the buttons helped but for the most part it is caused by bad buttons or bad capacitors

my monitor is only has 1 button how to fix this

@TeckDrivenTeck

3 жыл бұрын

Disconnect it, but that does not a solution for all monitors, some may work some may not

@stojanov4110

3 жыл бұрын

@@TeckDrivenTeck can i just break the button?

@stojanov4110

3 жыл бұрын

@@TeckDrivenTeck how can i dissconect it without opening up the monitor? please i need this fast

myne is still popping up after removing it

Same monitor, same problem 😅

@TeckDrivenTeck

3 жыл бұрын

Quickest solution is to turn on the monitor, unplug from power, disconnect the swich board and the plug it back in. It will remeber that the monitor was on and will always be on but it will go to sleep when computer is off

@saifahamed7395

3 жыл бұрын

@@TeckDrivenTeck thank you ❤️❤️❤️

He eating to launch you

I have this opposite problem with my Philips 55' LED tv- when tunring on it boots and then it immediately goes to searching for channels, and the volume immediately goes all the way down. as if the left scroll button is stuck. I've removed the button board on side, and the symptoms are stil the same. I've cleaned the button board contacts and no changes, I've done all power cycle attempts and removed batteries from remote. nothing. I've clearned all connetions with spray electrronic cleaner - no changes. I'm able to move the menus side to side and scroll to sources menu, but it is as iff the cursor's buttons are stuck down, wanting to scroll to the left. I have to hold the right button down to scrool the menus over to "Settings" and I try to get into that menu and nothing happens. menu gose away. so I hit the manual button on menu it pops up again and I struggle to get it to settings menu and I try to click on that and it goes away- no menu- cannot get into that settings to do factory reset. I can somewhat scroll thru input menu options, but let go of button and it scrolls to the left again. ITs erradic. The remote allows the set to turn on, but remote has no responsive features working, and does not turn off once it's already been turned on. *CAN Anyone here tell me What do you think this is? do I swap out main board? or what about the smaller control board that the IR sensor and button board both plug into? could that board be bad? there is nothing wrong with picture, screen or anything like that. tv turns on and off witht he power button. WhaT IS THIS?