What a fabulous dragon I love it!

Wow! That looks rad Jon!! So satisfying to watch the timelapse! & it’s so articulate

@JonS

2 жыл бұрын

Thanks Ron! I'm really pleased how it came out. It looks amazing in the flesh. I've ordered a 52mm filter adapter and a set of close up lenses to improve my timelapse quality. The printer bed here was too close to the HERO10 to really be in focus (it's probably only about 25cm at the top), and the only close up lens I had was a 15x one (far too close).

@AdventuresofRon

2 жыл бұрын

@@JonS that's awesome! i recently just ordered a marco lens for the GoPro - was inspired to capture some super slo-mo macro shots! cant wait for it to arrive!

@slimberlani6295

2 жыл бұрын

@@AdventuresofRon #

Respect for the 3d print It took it a long time

You make beautiful products

Great job Well done 💝🐲🐉🔥🔥🔥

The artist of this dragon has to be sad to see that some people sell the dragons printed with rainbow filaments and never give the credits on theirs tiktoks. The last dragon I saw on instagram was 500$ approximately.

@rochellecalimlxcim7112

2 жыл бұрын

Xxxxxxxxxxxx

@minhtrilieu664

2 жыл бұрын

J,ỉujckx.

@ahmadsadaan

Жыл бұрын

Did you ever give God credit of anything you did

@wiifitspeedrunner

Жыл бұрын

@@ahmadsadaan nope

@redacted6169

Жыл бұрын

@@ahmadsadaan We don’t even know if god exists-

Very cool ！

Do you just use the filament in the link? Do you need to play around with the settings for how the colours came out? Sorry if it's silly q, new to all this

@JonS

2 жыл бұрын

Yes, that's the filament. I didn't have to do too much messing around to get a satisfactory result. After using the filament for a small vase, I realized the transition is quite slow. With 1.2mm walls, 10% infill (not needed for this print really), and 182% scale, it came out just right. If I printed one smaller with this filament, I'd thicken up the side walls to try to maintain the mm of filament per layer (or to keep the total filament used roughly constant).

it looks realy awsome,Can you print ARTICULATED FROST DRAGON which is available in cults3d

How did you end up with what looks like perfect layer color balance? I assume the filament changes color at various places.. its like whatever filament you chose worked perfectly for this print.

@JonS

9 ай бұрын

@@deadline8416 yes, I printed large and chose the number of perimeters to get a good transition distance in z. I did also play with using the infill density to get a good transition. This model doesn't even need infill to print. Some later ones I did, I turned off infill and added a perimeter (for child proofing).

Man that song is fire!

DAMN. cool music

This dragon is my favorite one

Nice dragon, how do you print the whiskers for this dragon.Thanks

@JonS

2 жыл бұрын

Thanks! This one was for my kids to play with, so I skipped the whiskers, thinking they would not survive. For other prints, I included the whiskers (there's room for them in the center of the coiled dragon body/tail.

Hey Jon! Can you make a tutor for this ? Please

Hello! Beautiful dragon! I have been thinking aobut getting into 3d printing myself and was curious what kind of 3D printer this is!

@JonS

6 ай бұрын

This is a Craftbot Flow IDEX. It's a commercial printer. If you're interested in getting in to 3D printing there are a lot of great options in 2024 at reasonable price points (of course, "reasonable" depends on your budget). You should start with asking what do you want to do with the printer? That will inform you what materials you want to print with (PLA, PETG and TPU can be printed on an open printer; ABS, ASA, and nylon really need an enclosed chamber printer. It will also inform you of what build volume you need.

Wow jon 1.2 million views that's crazy

Dang that looks sick I love that colors you did a great job by making that 3D printed dragon Jon

I can’t find the link in the description for where to purchase the .stl

How much grams of filliment did it take

Hello, other things, a question, how do I make a commercial article, products, online purchases, 3D printing, what do you need, can you make one? where do you get it it is made without printing it is handmade 3d printing sells ONE PRODUCT

Do you know what the print volume is? I want to print one at my school but I don't know if the full size model will fit

@JonS

2 жыл бұрын

The coiled version of the model (there's a straight one too) measures 175.08mm x 146.01mm x 39.25mm for 100% scale. You can probably print it a little smaller, but at some point there won't be enough clearance for the print-in-place parts to free up, unless you add a negative vertical shell offset. What printer do you have at school?

@threeminutes5731

2 жыл бұрын

@@JonS a tiertime upbox+ i believe

@JonS

2 жыл бұрын

@@threeminutes5731 that has a 255 × 205 × 205 mm build envelope, according to the website. You should be able to print one at 150%, so long as you don't take up too much space with a skirt.

@threeminutes5731

2 жыл бұрын

@@JonS good to know I bought the model and some rainbow pla filament so I'm hoping it turns out well!

Hello, I loved your work, excuse me, where can I buy that dragon in those colors, my son loves that dragon and now he has me looking for it, but those who can do it tell me that it will not turn out the same as that, it depends on the filament, I am having a hard time getting it I even bought the printing patterns but they tell me that it depends on the material, could you guide me?

@scottydawg1234567

Жыл бұрын

I believe he linked the filament he used in the description.

@JonS

9 ай бұрын

@@scottydawg1234567 yep! The link is in the description (but no one ever reads YT descriptions)

Lindo demais

@JonS

2 жыл бұрын

Obrigada

Oh look, its me

OMG woow

How many mm you set in the Z Hop Height setting ?

@JonS

2 жыл бұрын

Zero! I didn't use any z hop for this print. Generally, I don't find I need it when printing PLA on this printer.

Now I want one too bad I don't have a 3d printer

That's a beautiful dragon. Be awesome if it was done in metal (gold, silver, copper, steel?)

@JonS

9 ай бұрын

That might be possible with the high metal-content filaments (like Virtual Foundry) that print a "green" part that you then debind and sinter in a kiln. Difficult to do with different melting-point metals though. Even if a single metal, getting a flexi model like this to work after the shrinkage could be hard.

Hey I know you from Danny black! Really cool content! I love 3d printing! (I have 2!)

@JonS

Жыл бұрын

Did you find me via Danny Black's comments, or is this some crazy coincidence? I love 3D printing too. What printers do you have?

@JH_HAY

Жыл бұрын

Nope this a weird coincidence I searched for flexible dragon! I have a dual extruded flashforge dreamer and a ender 3 pro!

@JonS

Жыл бұрын

@@JH_HAY that IS a crazy coincidence! Sometimes it feels like the claim of 7.7 billion people on the planet is a lie, and in reality there's only about 100,000 at most! LOL I have this Craftbot Flow IDEX and a Rat Rig V-Minion (amazing little printer). I also have a Voron v0.1 kit and an old Printrbot Metal Plus in the garage.

.6 with a .4 nozzle I see that you said your printing slow at 40mm does that help with the extra amount of plastic your trying to push out the nozzle? my first dragon came out like shit and my Benchy / Cali dragon using the same settings came out good. I did a .42 width with a .4 nozzle and I am running .28 Layer height I do print fast 80mm but I really didn't think my settings would come out as bad as it did.

@JonS

9 ай бұрын

The printer has Volcano-like nozzles so has plenty of flow, but I find it hard to get a very shiny finish if I print silks faster. I've printed silk filaments at up to 400mm/s on my V-Minion, but I've not managed to get it as shiny as here. Generally, printing slow means shinier, even for non-silk filaments. You can see this when printing fast Benchies where the shininess changes at different z heights due to the printer slowing down when there's a minimum layer time set.

Hey I have a 3D printed John Deere scooping thing and I need it to be painted so you think that you can do that

make a shop with that dragon

I have a question, my articulated dragons always have their joints fused together so they can’t move How do I fix that?

@JonS

3 ай бұрын

Could be caused by elephants foot (over-squeezing of the first layer). A lot of modern slicers have elephants foot compensation options. Or you could try the old-fashioned approach of better dialing in of your first layer offset and flow. It might also be over-extrusion for all the other layers. The simplest fix is to apply an x/y compensation in the slicer which pulls in the outer perimeter slightly. Which slicer are you using?

@Shade949

3 ай бұрын

@@JonS I’m using creality slicer

Salom menga aytingchi bu ajdarhoning chizmasini qaysi sahifadan oldingiz ?

I want one

I would pay you to make an anatomically correct shark one of these, and send it to me ngl

Is it soft?

best thing inn my life

What printer are you in this video?

@JonS

2 жыл бұрын

Craftbot Flow IDEX. I put some of those details in the description.

How do you print multi color things like that?

@JonS

Жыл бұрын

Rainbow filament. It slowly changes color throughout the spool.

WOW!!!!!!

Really nice dude can u tell me what printer it is please

@JonS

Ай бұрын

Thanks! The printer is a Craftbot Flow IDEX

❤️

love this song what's it called

hello help me help me which is the best 3d printing pen vs FILAMENTS for design program 3D PRINTERS software greeting

Please print GIANT ARTICULATED DRAGON WITH 3 HEADS it's on cults

me knowing that it’s from a website and having that print color

I have a tiny blue one

Compro! :D

Did you print it without supports

@JonS

Жыл бұрын

Yes. It doesn’t even need infill.

👍👏

What kind of printer is this?

@JonS

Жыл бұрын

Craftbot Flow IDEX

Какой пластик использовать для такого дракона

@JonS

Жыл бұрын

Радужный шелк PLA

Can you please send me one of the dragons the one that changes colors in daylight

Hey, I don't know much a 3d printing but I'm thinking of getting into it. That's so cool! So can you answer my two questions? a) I know 3d printing is really slow so how many hours did it take to print this one? b) What is the cost? Ignoring everything, what is the price of the plastic used in this model printing?

@JonS

2 жыл бұрын

a) This was a long print. The silky filament works best when printed slow, so the total time was about 48 hours. With a different filament type and less concern about getting the best quality, I probably could have cut that in half without trying very hard. There is a big movement in speed printing, but that's generally for advanced users. For example, I just completed building a Ratrig V-Minion that can print very fast (still working out how fast). b) This used something like $10 of silk filament. Using a less fancy filament would reduce the cost to something like $6-7. Of course, printing smaller = cheaper. At the 182% scale I printed this model, it uses a lot of material. At 100% scale, this would take

Ok I like it but WHAT KIND OF MUSIC IS PLAYING

what is the printer

@JonS

2 жыл бұрын

Craftbot Flow IDEX

I want you to print a movie creature (any creature that is famous like for example godzilla)

Great job on the dragon, music was hella annoying dude

@JonS

2 жыл бұрын

I came across it on the GoPro Quik app, and it fitted my mood at that moment. I'll take your comment in to consideration next time. Maybe something less polarizing would be better?

@mszoomy

2 жыл бұрын

@@JonS no matter, everyone has different tastes, your video, you play what you want, if I don't like it, I just turn off the volume/mute but as an artist/creator I also know feedback is important at the same time you can't please everyone

Can you link the 3d printer

@JonS

2 жыл бұрын

craftbot.com/products/craftbot-flow-idex

Did you need supports for this?

@JonS

6 ай бұрын

No supports are needed for this model. I doesn’t even need infill so long as you have sufficient perimeters.

@daveowens7613

6 ай бұрын

Cheers!

#underrated

Yo quiero uno de esos

Qual filamento é esse?

@JonS

Жыл бұрын

Matterhackers Rainbow Build Series PLA, mas também já usei Sunlu Rainbow Silk PLA+.

No you have to tell me how what and how do you get that printer and what you do to get that Ohta make that

Can u make a mlbb character dyrroth's 3D print

I know from you always thinking everything is benchy that you really like benches i tried to find a 3d benchy articulated dragon but i couldn't do you know if there's any designs anyone can you send jon a link to print if anyone finds one

How much 3D printer ?

@JonS

2 жыл бұрын

That's a $3,500 printer, but you can print this on a low-end consumer printer (like a Creality) without any problems.

Bonjour, comment s'appelle cette machine svp ?

@JonS

2 жыл бұрын

Craftbot Flow IDEX. Voir les détails dans la description de la vidéo.

this song bro.

48 hours! o_O

I 3d printed this

Sangat cerdas & kreatip buat Naga.

@JonS

Жыл бұрын

Ini bukan desain saya. Saya hanya senang mencetaknya.

Can i purchase this from you 🥺

@JonS

2 жыл бұрын

Sadly not. That would violate the license for the 3D model (not to be sold for commercial purposes).

Wings are missing

Где можно купить

Omg we have the same but the top is yellow but it doesn't matter and my dragon horns is broken

How mush Time to make one?

@JonS

2 жыл бұрын

See the description, but about 48 hrs. It's silky PLA, so I print it slow to get a nice shine.

O-how-o-how?

Я видел ссылку но не могу оплатить ,карта не проходит может я вам заплачу за файл

Hello, Can You Print Articulated Easter Dragon?

@JonS

2 жыл бұрын

I’ve not seen that one. I’ll have to search for it.

@ministryofmuggle-borns4290

2 жыл бұрын

@@JonS ARTICULATED EASTER DRAGON PRINT-IN-PLACE it's on cults

I like the drago your

добрый день можете поделиться файлом для печати

@JonS

2 жыл бұрын

STL можно найти по ссылке в описании видео.

take my moneY!

yo cuando hablo en inglés y soy fan de security breach way to go súper estar

I have this dragon

Can i have 3d file

@JonS

2 жыл бұрын

The link is in the description

can you make a giveaway of this because I like Chinese dragons

Chique

Yo guys its kaido true form

Faia um pro meu filho porfavor

stl please😱🤩😍

@JonS

Жыл бұрын

It's available from the design using the link in the description.

Why no raft or anything

@JonS

Жыл бұрын

It doesn’t need one so long s as you have good bed adhesion (it does suck if a foot comes loose near the end of a print). It’s worth noting this model also doesn’t require any infill either.

File??

@JonS

Жыл бұрын

Check the description for a link

do dragon ball dragon

tôi thật sự thấy nó rất đẹp

@JonS

2 жыл бұрын

Cảm ơn

Shenron

ルーティンっっっt

Bonjour tu peux me faire un renard s'il te plait merci