Rafa's FIBERGLASS KICK PANELS, Part 1 - Focal K2 Power 3-Way setup - AMPLIFIED #698
Автокөліктер мен көлік құралдары
Today Rafa is starting a new project! He is building a set of fiberglass kick panels to fit a Focal three way speaker set.
Ed Bassmaster LOOK AT IT!! -
kzread.info/dash/bejne/d3psqcp8XbfFfdI.html
SOUNDMAN -------------- goo.gl/5Spv9g
CT SOUNDS --------------- goo.gl/NWNQlC
MOBILE SOLUTIONS --- goo.gl/iOqFBu
Xtreme Auto Sports ----- goo.gl/GvzsWm
Thank you for watching AMPLIFIED ##698
Tune in everyday for non stop comedy, DIY fabrication and vehicle customization from award winning car audio installer Doug Bernards, Inventor of the patented iPad dash kit available at SoundmanCA.com.
Пікірлер: 266
SMD Sunflash FTW. :D
@IzziedeD
6 жыл бұрын
meade916 i think you’re biased ;-)
@richardmunoz9685
6 жыл бұрын
Steve you're the man
@jeffneedstogivejakeaturnon1083
6 жыл бұрын
meade916 Does that sunflash work in cold weather sunlight too? I glass up here in Spokane, and it's colder than a well diggers belt buckle up here right now, but it would be nice to be able to not have to bring pieces inside the house to dry.
@meade916
6 жыл бұрын
sure does. I gotta couple dented cans here if you don't mind the container not being perfect i can send you out some to try. Email me at wccaraudio@gmail.com and ill ship it right away. Thanks man!
19:05 LMAO funniest part Doug make this your new troll thing
"What are you gonna do with this wood?" "Lay it on you." 😂😂🔥🔥
Fiberglass!!! Doing a set of door panels in my F150 to hold (2) 6.5" separate Dev Tech's each in a tuned full fiberglass enclosure. ULTIMATE MID BASS!!! Going to leave it sealed at around 1 Cubic foot for now may port it afterwards. Crushing it!!! Yo those Focals are nice but I'm telling you man... A decent set of 8ohm home audio speakers bridged to 4ohms is so next level you will NEVER look back. Did a system in my old truck with drivers and passive crossover out of a set of Definitive Technology's BP 20's installed in a full range enclosure powered off of an old school Phoenix Gold MS 21215 amp and out of the hundreds of installs I've done over the years this was so next level i felt like i was cheating. Listen to your uncle Joe. You kids have no idea;) Fuck that 4ohm shit. It's pointless like having half of a boat ore in the water. With the D class amps they have out today it boggles my mind why manufactures still produce 4ohm speakers with half the coil windings you could have anyway, love your fucking videos man you crack me up and I don't know who edits your shit but damn, lol they are the shit. This shit should be on TV. Really good. Can't wait to see these panels finished and have an awesome New Years!!!
If only someone had done a multi part series on how to make fiberglass kick panels that Rafa could learn from........
Love this style of video much more than the live!! This editing I know takes more time but I don’t think I’m alone!!!
My first vehicle was my Dad's '78 F-150 custom stepside with a built 351 Cleveland in it. We put new slats in the bed of that truck, it was so pretty. I flipped that truck 3 times and got thrown 40 feet from it in a drag race wreck...
"Can I help you?" Makes me laugh everytime
Those speakers are beautiful. Can't wait to see and hear them installed. I think the enclosures would look sick clear. So u could see those sexy speakers
im happy to see you and rafa juntos again.
Rafa needs more high fructose corn syrup
i turned off ad blocker just for you doug ❤😂
@soundman_caraudio
6 жыл бұрын
😘
@Savage-ih5il
6 жыл бұрын
Bleezy411 ass kisser
@apllDgrapllD
6 жыл бұрын
Bleezy411 we all know you meant ass blocker
@treynathaniel4075
6 жыл бұрын
I turned ON ad blocker just for Doug.
Another great show!!!
Rafa served you before the year ended..... DAMNIT DOUG, YOU HAD ONE JOB..... ONE DAMN JOB! 😂😂🤣😭
Doug where are the Patreon supporter 2018 Doug’s Wife Bikini Calendars!?!
@Robert-vp6xf
6 жыл бұрын
I wanted to know who that hot broad was in his videos.... Damn.... Doug has a hot wife!
@poopandfartjokes
6 жыл бұрын
Marc Reinecker what about the chubby chasers? Rafas mom can do a spread for them? It would take all 12 months to cover her entire body.
@MrFuchew
4 жыл бұрын
@@Robert-vp6xf of course he does doug it cool as fuck
So we’ve all heard what the truck sounds like from the inside quite a bit now but what does it sound like from across the yard? Or from a public prospective? Ie driving by.... 👍🏼
watching rafa work reminds me of why i don't let people work on my vehicles.
That was a great episode
Doug, it's not just Harbor Freight. I ordered a Dragway Tools blast cabinet I bought this Christmas for my father. It's the exact same cabinet. Probably produced and licensed to multiple vendors.
Happy New Years Doug and family!
Have a happy new yr to you an yours buddy. Thank you for an entertaining yr. Looking forward to the next!
Another successful year!!! Keep it up brotha!
Bumpin that Tribe Called Quest 👍🏼🔊 ........AND Cypress Hill?!?!?! .........Killin it........
A stunning comedian, LOL!
Great show happy new year my man
Rafa owes you his life for allowing him into the audio world and teaching him the skills he has. He should be bowing down to you every time he steps foot in your presence.
@mreinecker
6 жыл бұрын
Its a joke buddy
Happy New Year guys.....great episode when are you going to rock out some umpa umpa music in the f-100....lol
Those explosions got me rolling
My Dude Doug E Bernard Super Genius it’s been a fun year, watching & learning mostly laughing with you Bruh! Have a Happy New year to you & the Family Stay Eazy
Bad ass!👍👍
Another great video
HAPPY NEW YEAR DOUG!!!!!!
I have the exact set in my highlander with a fdp900.6 and a jbl ms8. Absolutely Love them. I would also love to hear a professional review on them.
Happy New Years Doug
Always plug...SMD FTW!!...love the videos doug keep em comin
I love your video already.
He’s going to lay it on you!!! Oh my!!! Wonderful comeback!!!
HAPPY NEW YEARS TO YOU AND YOUR FAMILY DOUG!
Happy New year's Doug, Rafa and all car audio junkies!!!
Rafa stepping his game
Have a Happy New Year Douggie!!
Happy New Year, Doug! Here's to RIPPIN' IT in 2018.
Happy holidays Doug+Family! Hope you all have a safe and awesome break!
BEST SEASON EVER!
Happy new year doug and rafa and to your familys as well
Nice show today.
RAFA! We love you! We want more ... much more rants for 2018!!!!
I’m dead 😭😭😭😭 1:52 in..... ”Can I Help You” It never fails, always interrupted mid-stoke..🤦🏽♂️ Story of my life 😆😆😆😆😆😆
SoundmanCA u r now a professional consultant
Bumping a tribe called quest! Doug's an OG
Happy new year buddy.
Happy New year's!
Rafa snapped lol
Watching from Belgium, nice work doug👍
HAPPY NEW YEARS.
Happy New yrs Sound man....."well u look at that.....".
Happy new year!!
"The only reason that worked so well was because you used my light"- Doug,then Rafa gets so defensive 😂😂😂.Love your videos man👌👌
Happy New year douggy
Happy New Year brugh
You will need a shop vac to suck out the dust from your blasting cabinet. I had the same one it will just fill up dust and you can see anything if you don’t. Happy new year Doug.
@TheBrokenLife
6 жыл бұрын
...and a drywall filter or the free silicates will be all over the shop.
nice done ✌️ chido we ✌️
That kick panel is going to twist!
Definitely do a follow up on this truck, please!!
I bet you like the tag on the truck a lot^^
I actually enjoyed this episode! First time for everything! Ha....Don't do a did doug, heee!
Happy New Year. See ya next year! 🎉🎊🎆
Funny as hell...No show Monday!!! Dammit LOL....
Ha safe new year 🍻🍻
that sweet stepper motor sound tho...
happy New year's
That's funny I just got done hooking up some new stuff to my compressor and chasing down leaks. Need some snoop
What door speakers do you recommend from Ct sounds? I’m wanting to the component ones.
Your halarious bro! You make me laugh out loud everytime I watch one of your videos!
ok rafa we see you putting in work
How long do the router bits last on the CNC machine ?
I just noticed someone used the name Rafa's Mom as one of the Patreon sponsors at the end of the video. LOL
AWESOME #BROTHER BASSHEAD
happy new year 2018 from 🇾🇪
How bad do the doors flex/rattle on the f150 when the system is turned up
You should write the names of the tracks you use in each video in the description.
Sinners...lol. Good show today.
Bro your way to funny. I almost died when you did the hand motion from your lap top to the other computer just like Tom cruise in that movie. I’m literally laughing hard as fuh
Do you think you’ll ever produce the iPad Pro side slider kit or is it only going to be exclusive when you had make them for certain people ?
you should do rafa's kick panels it will get done faster ...the truck it going to be nice..happy new year from Canada...
Did you made a sealed enclosure for those midbase focal speakers?
You dippin in the 11s bro...
I almost died at 1:50 lmfao
Keep those Mexican jams coming rafa
doug you should save that laugh at 19:04
Midnight Marauders for the win.
Hey Doug what's the brand of your CNC machine ?
Is it good for the amplifier/bass that the voltage drops to like 10v?
what about that vato sound while rafa's working!!! no man, thats too good for him!!!
Do you have to use lacquer thinner to use the roller?🌬
Drivers side doug at 20:58 I guess you brought one to many rollers ;p
curious, why not install the speakers in the doors?
Why not creating some ipad pro mdf kits??
Tribe called quest!
Happy New Year Doug. It would be nice to get a nuke explosion for the New Year