Racing a Vintage RC Car!? Kyosho Scorpion Re-Release
Just a quick video I made on a practice night. This buggy has been raced a lot in the past, and I hope to continue driving it as long as I can.
Жүктеу.....
Пікірлер: 11
@DanielKezar3 жыл бұрын
Definitely nice to see it in the hands of someone having fun and not sitting in a glass case.
@hyster16t2 жыл бұрын
Awesome.👌
@benjaminspray5192 жыл бұрын
Great effort!
@sammni3 жыл бұрын
Reminds me of my Grasshopper I got around the late 80s as a kid
@CMBProjects3 жыл бұрын
Cool car! You would like to see my homemade 1/5 49cc RC car!!
@coopersharp29212 жыл бұрын
wow it did pretty good, what size tires were you running on the track? 2.2?
@Pilotgeek
2 жыл бұрын
Yes, just standard 2.2" tires. They were all TLR 22 2.0 rims. The rears are reversed to get the correct offset, and the front tires I designed a 3D printed bearing to hex adapter.
@coopersharp2921
2 жыл бұрын
@@Pilotgeek nice 👍thank you!
@coopersharp2921
Жыл бұрын
@@Pilotgeek I am haveing some problems with my buggy losing control. The strait line stability isn't that great, and tends to spin out. Do you have any tips to fix this?
@Pilotgeek
Жыл бұрын
@@coopersharp2921 this buggy seems to like a bit of toe in on the front. I also limited the steering to like 60% of the servos throw because the stock geometry creates some wild Ackerman towards the ends of travel. Could try thicker grease in the differential as well.
@coopersharp2921
Жыл бұрын
@@Pilotgeek thanks! Yeah I also noticed I had to limit the servos when I was building It
Пікірлер: 11
Definitely nice to see it in the hands of someone having fun and not sitting in a glass case.
Awesome.👌
Great effort!
Reminds me of my Grasshopper I got around the late 80s as a kid
Cool car! You would like to see my homemade 1/5 49cc RC car!!
wow it did pretty good, what size tires were you running on the track? 2.2?
@Pilotgeek
2 жыл бұрын
Yes, just standard 2.2" tires. They were all TLR 22 2.0 rims. The rears are reversed to get the correct offset, and the front tires I designed a 3D printed bearing to hex adapter.
@coopersharp2921
2 жыл бұрын
@@Pilotgeek nice 👍thank you!
@coopersharp2921
Жыл бұрын
@@Pilotgeek I am haveing some problems with my buggy losing control. The strait line stability isn't that great, and tends to spin out. Do you have any tips to fix this?
@Pilotgeek
Жыл бұрын
@@coopersharp2921 this buggy seems to like a bit of toe in on the front. I also limited the steering to like 60% of the servos throw because the stock geometry creates some wild Ackerman towards the ends of travel. Could try thicker grease in the differential as well.
@coopersharp2921
Жыл бұрын
@@Pilotgeek thanks! Yeah I also noticed I had to limit the servos when I was building It