RACECAR FUEL CELL BUYER'S GUIDE - RACE/DRIFT/TRACK CAR! And why you shouldn't cheap out!

Help support my channel and AE86 drift efforts by buying some merch!
doctored-garage.creator-sprin...
Check out my sponsors:
JUST ENGINEERING - Angle Kits and Suspension Bits - www.justengineering.ca
Radium Engineering - www.radiumauto.com/
JNA Performance - www.jnaperformance.com
If you want to come drift Rockingham Speedway with MB Drift, make sure to checkout:
/ mbdriftseries
/ mbdrift
www.mbdrift.com
Here's my stuff -
www.doctoredgarage.com
/ doctoredgarage
My DRIFT Team - Unsung Legends
/ unsunglegends

Пікірлер: 28

  • @jonnyb2532
    @jonnyb2532 Жыл бұрын

    Great informercial!

  • @vandettabuilds6641
    @vandettabuilds664110 ай бұрын

    That’s a beautiful fuel cell and maybe one day I might get it. Terrific very vert good video!!! Thank you!!!

  • @DoctoredGarage

    @DoctoredGarage

    10 ай бұрын

    Thank you! I put it off for a long time and tried to get by with a more budget friendly setup, but I'm glad I made the switch. The car is waaay more reliable and it's saved me a lot of headaches. Well worth the investment!

  • @vandettabuilds6641

    @vandettabuilds6641

    10 ай бұрын

    @@DoctoredGarage that was the very best Radium video by far. Good job so got a subscriber in SLC

  • @gerardo1560

    @gerardo1560

    10 ай бұрын

    🍔

  • @WoodrowsWheels
    @WoodrowsWheels13 күн бұрын

    This videos old but hopefully you put a check valve/roll over valve on that vent tube. You only want it to draw air in as the fuel level drops so the fuel cell doesn't build up a vacuum. But you dont want fuel to be able to travel out of the vent in case of a roll over. Nothing is worse than rolling a car over and then having your fuel pour all over the place while you are trying to get out of the car

  • @DoctoredGarage

    @DoctoredGarage

    13 күн бұрын

    The radium FCST has a rollover check valve built in :) no need to add another one. Even the old aluminum box I used before had a built in rollover check valve.

  • @lastfanstanding999
    @lastfanstanding9992 ай бұрын

    Hello, My 91' Lexus LS needs a fuel cell, and the one that is for that model is discontinued, I can buy a used one on eBay for $250 + 300 shipping I also need the fuel sending unit and fuel pump bracket and the same guy has one on eBay out of the same tank for $175, So as you say if the car is a failure I can always take the tank out and put it in something else or build an EXO Lexus and I'll have the proper fuel cell, My question is with all the electronics and everything and the the computer brain for that model I'm wondering if I'm going to have trouble putting an aftermarket tank in it, So is the Radium a good match for the old Lexus LS ??? Please help ! Thanks😯🤷😊👍🇺🇸

  • @DoctoredGarage

    @DoctoredGarage

    2 ай бұрын

    If this isn't a race car that needs a fuel cell, I would just order a used tank off eBay or go to a junkyard and pull one. You can likely swap your fuel level sender and fuel pump hanger from the original tank to the new one. The radium fuel cells can come with a fuel level sender, but it may or may not read correctly for your fuel gauge. Your car is old enough that the fuel pump and everything should wire up just fine and work like the original without an issue - other than the fuel gauge.

  • @xorzero
    @xorzero2 жыл бұрын

    Super helpful dude, Great vid! Has Radium given you a purchase code for any discounts as a sponsored driver? Cheers!

  • @DoctoredGarage

    @DoctoredGarage

    2 жыл бұрын

    Hey Alfredo! I'm glad this is helpful, thanks! They did. I was going to buy their fuel cell regardless of if they partnered with me or not lol, it was very exciting that they wanted to! I'm super stoked to get this in the car. I made most of my measurements tonight, now I just need to break out the fabrication tools :)

  • @xorzero

    @xorzero

    2 жыл бұрын

    @@DoctoredGarage Thanks for the response i totally worded that wrong, and meant if they were offering your viewers any discounts to their products (which would also make you more valuable to your sponsors with higher ROI not only with product reviews but also viewer purchases (For example like Joshiroku and Annex)

  • @DoctoredGarage

    @DoctoredGarage

    2 жыл бұрын

    Ah yes I get what you mean! Currently no, but if that changes I'll update the description with the details!

  • @jodyrobinson5122
    @jodyrobinson5122 Жыл бұрын

    For demolition derby.. Will a in tank pump fit in a 5 gallon boat tank and work?

  • @DoctoredGarage

    @DoctoredGarage

    Жыл бұрын

    Hmm not sure on that one. Usually fuel cells will have some dimensions for the flange in the instructions/info sheet, and you can compare that to the in tank pump setup you're wanting to run.

  • @AcuraintegratypeS
    @AcuraintegratypeS3 күн бұрын

    Hi there I have a 2024 Acura Integra type S my gas tank holds 9 to 10 gallons I want to expand my gas tank. Should I add a fuel cell? I. Want 15 gal tank So basically I wanna add a second tank that will drain into my primary tank. What would you do? HELP😂 I. Go through ten gallons very quick

  • @DoctoredGarage

    @DoctoredGarage

    3 күн бұрын

    I only recommend using a fuel cell on a full race car.

  • @jodyrobinson5122
    @jodyrobinson5122 Жыл бұрын

    Which fuel cell is best to put a in tank fuel pump in?

  • @DoctoredGarage

    @DoctoredGarage

    Жыл бұрын

    At this point I will always recommend the Radium FCST setup for in tank pump. It's quiet and has saved me multiple times at this point haha. They use a common fuel cell flange type, so as long as the fuel cell has the right flange you should be good to go. I'm REALLY happy with the Radium fuel cell.

  • @AN.G_
    @AN.G_8 ай бұрын

    Does radium make one for mechanical fuel pump that runs off the engine camshaft?

  • @DoctoredGarage

    @DoctoredGarage

    8 ай бұрын

    Hmmm... There might be a way to do this, but I think the better option would be to use a low pressure lift pump in the fuel cell to a low psi fuel pressure regulator then to the carburetor and eliminate the mechanical fuel pump all together. You could reach out to Radium and see what they recommend!

  • @rpm427sc

    @rpm427sc

    6 ай бұрын

    They make a version that has a -16 feed line designed for big HP external/mechanical pumps. PN# 20-1995-00 FCST-X

  • @CaseAgainstFaith1
    @CaseAgainstFaith12 ай бұрын

    Why would a fuel cell need ventilation while a standard basic gas tank doesn't?

  • @DoctoredGarage

    @DoctoredGarage

    2 ай бұрын

    Standard gas tanks vent through the evaporative emissions system, it just vents through a charcoal canister to the intake of the car :)

  • @CaseAgainstFaith1

    @CaseAgainstFaith1

    2 ай бұрын

    @@DoctoredGarage Thanks! Could you make a fuel cell vent via the evaporative emissions system?

  • @DoctoredGarage

    @DoctoredGarage

    2 ай бұрын

    Yes, but it might not be as straight Forward

  • @CaseAgainstFaith1

    @CaseAgainstFaith1

    2 ай бұрын

    @@DoctoredGarage Thanks for responding!

  • @DoctoredGarage

    @DoctoredGarage

    2 ай бұрын

    You're welcome! Sorry I don't have a specific answer for you on that.

Келесі