I’m thinking supercharger now that you added all that extra weight, and now you have extra brakes to stop extra power. Just saying 😂

@69sound81

6 ай бұрын

Nah, you dont need or want that for a Prerunner. On a track truck or quarter mile truck yeah, for sure. Even a touring truck intended for the highway and rural roads, but a prerunner goes through too much dust to trash a supercharger and honestly, it wouldn't take advantage out of it either cuz it is a DIY prerunner and not a trophy truck.

Glad you guys have a solid marriage with a high level of trust--getting under a moving truck with the better half at the wheel. 😊😆 Love the show and great episode as always--blessings to you and the family!

@JameGoFast27

10 ай бұрын

It’s lifted and she went straight if she hit him it would’ve been his fault

I really like how he pushes through when things don’t go as planned. I’ve taken some pointers from him when working on my 07 Silverado or kids goKarts and things aren’t going smoothly. Appreciate the channel and pass along that skill and hard work ethic to those kids.

Awesome! They always say, upgrade Pads, Fluid and brake Lines before anything else.. Or like me, you replace the worn out rotors and upgrade what you can with what's in stock for your vehicle. Bigger diameter doesn't always help in braking distance (because of added centrifugal forces and unsprung weight) but in the repeatability of the distances. Larger rotors help in regards to the surface area for heat, which is the major factor in brake fade/failure when your running track days on stock size rotors. Now going from a single piston to a 2-10 piston caliper will help in the clamping forces spreading that out equally on the larger rotor. But there is the point of diminishing returns.

I know exactly what you mean with your brakes it seems like my 98 ranger stop better than my 2012 Chevy Silverado. I have thought about getting bigger rotors and brakes for my Chevy truck as well. As a side note you and your family have come a long way since your first video congratulations 👏👏👏 keep up the good work 👍👍😎😎

I used blue lock tight. I learned the hard way and haven’t looked back. I used blue because eventually I know some of those bolt will need to come back out sooner or later.

Solid content, as always! You do it like a pro man. Love the before and after showing the results. 🤙🏻

You’re the dad we all needed as a kid.❤

Awesome man! For those wanting better braking check out Mejia motor sports and fabrication they have a budget conversion and it’s meant to work with stock 16’s. Also have more spendy options as well!

Yes...been waiting for the next video! Now it's time to work on the TB!

Blue tooth hearing protection headphones when you use that grinder. It’s amazing how loud the grinder can be over time. Hearing the screams of your grandchildren driving you kids crazy will be a darn entertaining.

I did a little shop mfg 15” rear brake conversion and made a huge difference

Hey brother just wanted to say I really dig your energy. And editing is on hit. Keep on keeping on

Ohana means family and no one gets left behind! - stitch

Get a dehumidifier. That'll help. Awesome work, as always. Thanks for sharing

Wanted to do this upgrade on my 07 silverado but it was quite pricely(especially for a 18 year old). Decide to go with the 2020 silverado brakes instead but great to see you fullfill my dreams. :} Keep up the good work

@jeffreybouche3817

Жыл бұрын

Just found the whole set drilled and slotted with drum brakes for $364 on 1A Auto

I just installed the same brakes on my Duramax H2 and I’m not happy with them. I’m chasing a pulsing issue like a warped rotor but they aren’t warped. Wilwood told me to sand the rotors and pads and re bed. I did that and still have the same problem. Ready to put the stock brake system back on.

Nice review I just bought these myself, 👍🏻👍🏻

You should do Little Shop MFGs rear drum to disc brake conversion. They have Wilwood calipers to select too (although they are smaller than your fronts). I have drum brakes i have been wanting to convert but havent seen a solid video on it for a GM truck so it would be nice to see!

hey brother! great video. love the videos but hope you do some more mods that we can do on our own every day driver trucks. maybe some forced induction action would be cool? keep up the good work !

Hey man.. not trying be a know it all.. I’m pretty sure you have the rotors on the wrong sides.. they are directional. Switch passenger and driver and you will be mint

@HoustonRacewayKid

Жыл бұрын

Not a fact check here, but I was interested in that so I looked - honestly thought the grooves should flow rather than hook….and you’re right, from what I found. Interestingly enough, similar to old corvettes like the C4 rims those “saw blades” grab the air in towards the brakes. You always see them backward, but I think it’s more the tire shops fault for the way they “x- pattern” or the rears strait forward/fronts cross to the rear…anyway. You’re a good man!

So sick! Nice work 🤙🏼🤙🏼

Love your videos and love the positivity.

Brakes look killer!

You think for that kind of money all the parts would work/be inspected before they ship. That would be frustrating! Good thing you have other vehicles. Love the channel! Keep up the great work! Take care!

Put Wildwood on the rear you will love it!😊

Have u thought about forced induction for more power ? And if so what path are u thinking

Do you have a vaccum bleeder that connects to a air compressor for bleeding breaks, so easy to use and very little mess and it can be done with one person

i feel special seeing it this early

@ttuclint

Жыл бұрын

That’s what she said

Hey, were the discs installed on the correct sides? Usually with slotted brakes the slots at the top of the disc run up and back. It looked like yours were running up and forward. Awesome build. Relatively new here, but love the channel. [2011 Chevy Silverado LTZ, 5.3 L, Crewcab]

That’s a sick kit buddy. I wonder if that kit will fit on my 2022 Trail Boss with stock 20” wheels ?

So are you going to upgrade the back brakes

Nice. Did you had to change the master cylinder to make it work

Lookin' good! Question - where did you get that piece that goes between the jack and the truck? I need one for my Armada now that it's too high and I'm tired of using a block of wood 😂

Since you had that trouble with Wilwood, I'll go with Brembo ...

Love the channel. I just wish they were a little more frequent. I realize you have a real Job but I want to see more content.

High Caramba Dude, Badass Chevy... Brakes takes long time to break in, how about an update brake test video after a few hundred miles of city driving idk?!😊🇺🇸

Hey, can I ask what oil grade do you run on your '20 Silverado? Is it 0w-20 or 5w-30?

They will also be more consistent over repeated braking as they rotor has a greater heat capacity before significant fade sets in…

Imagine the rears being switched out. Can’t even imagine the stopping power!

Where did you get your steering wheel from?

I absolutely hate the stock breaks on my 08 crewcab definitely gonna have to upgrade soon

@LonestarHawaiian

5 ай бұрын

They've just gotten better with time and break-in... I need to get the rears upgraded from drums now.

The FMVSS Brake Bedding Procedure is something in the realm of 300 45-0 stops before brakes are fully bedded. I'm an automotive test engineer and most of your companies like wilwood don't do the FMVSS testing because its far too expensive but having had wilwood brakes on a number of vehicles I have tested they just keep getting better until you boil the brake fluid or destroy the pad.

@jackwatson1127

Жыл бұрын

That's also at a max of 150lbs of brake pedal force too.

U think it's the same set for my 07 tahoe

If you had a factory defect, shouldn’t the supplier have sent it to you at no charge?

What was making the clunk noise for you?

@chrisbauer1579

7 ай бұрын

Does anyone know what it was? I’m having the same issue.

Why didn't you just drill out the holes in the 90°s?

For what those probably cost I’m not sure that’s worth the price. I’d expect a whole lot better performance

for 2018 silverado, what is the maximum negative offset for wheels to fit a willwood brake kit?

@LonestarHawaiian

Ай бұрын

Check out Wildwood’s website. They have charts with detailed wheel offset requirements for each of their kits.

wen duramax?

6 piston rear calipers next.

Kind of disappointed that, when using the torque wrench, you didn't say, "Make the noise..." (Bad Obsession Motorsports)

Dang it I've been saying it for a year now the o.g. need a truck Norris cam kit

2nd viewer woo-hoo. Love what you are doing on the channel

So what about when they are worn out? Do you then have to rebuy the $2400 kit?

@LonestarHawaiian

Жыл бұрын

No, just like any other brake service. Replace pads. When the rotors go, replace.

Stock brakes in good shape can stop a truck once or twice just as well or better then super car brakes. It’s the endurance and pad material that makes all the difference

You gotta go diesel if you can find a 2006, 2500 Duramax

My man quoted Jeremy Clarkson from top gear

I believe you installed the disk on the wrong direction? They should be swapped to opposite sides? @LONESTARHAWAIIAN 15:00

@Establishyours

Жыл бұрын

They should perform better when they are swapped to the proper direction

I'm sure those brakes are better but with different ties it's an inadequate test.

You ahould put a whipple supercharge in that thing🤪

@Quartzhawk878

Жыл бұрын

He’s gonna need to with them 37s.

And then the transmission takes a crap. Or your vss craps out from heat and you go into limp mode on the highway 😔😔

I love watching your videos but I seen this one. You should of safety wire the rotors

17:19 is what you came for

I have a question...whats the point in lifting a 2wd truck?

@BuiltByLondonRacing

Жыл бұрын

Now mind it, I not bashing just want people opinion

@diehardoioioi

Жыл бұрын

For someone like me that lives in the city, I don't need 4wd. We do have the occasional flooded street, potholes, or any small obstruction I need to get over where a lifted truck would come in handy.

@BuiltByLondonRacing

Жыл бұрын

@Rebel_Within I live in Texas as well. But im in Dallas. I'm on a 3/5 drop and never had a problem. Hell I was in stand still traffic and got off of interstate 20 going up a hill dropped in a 2wd trick.

@diehardoioioi

Жыл бұрын

@@BuiltByLondonRacing I'm from Texas as well but from Houston. During Tropical storm Harvey if it wasn't for the lift I would of been stranded like some stock height trucks that night. Granted I was stupid for going out in a storm like that but I sure am happy I had a lift even if it was just a 2WD.

Use Blue Loctite, you are going to regret using Red.

I hate to be that guy but your brakes are directional and it looks like you got them switched up the vents should be rotating towards the rear of the vehicle. It's just the rotors that need to be swapped side to side.... Have fun enjoy

No drill? Logic says that drill and drill bit would've saved you a lot of time but hey you got this smh

You are not ever supposed to let a brake caliper hang. You always sit it on the frame or somewhere other then let it hang. 7:59

@matthewjensen8960

Жыл бұрын

It’s on a bungie tho

So not worth 2500 bucks when you can get drilled and slotted rotors. 14-18 is the same calipers. That’s the reason why 99-06 people using the 14-18 cailpers becaue they are bigger. And cheaper and will stop just the same

Painted rotors, whaaat?

@kevinst-john1380

Жыл бұрын

From my understanding the black on the rotors is a layer of zink

@seanstinson5959

Жыл бұрын

Maybe idk , I was just surprised to see that, painting rotors is kind of an old joke on motorbike/car forums for me so I was a bit shocked ahah I guess you gotta be extra carefull on your first few miles It looks good in the end I admit it, and having the contact surface exposed only is not a bad thing, less rust, better looks !

@someoneyouknow6632

Жыл бұрын

It’s an initial protective coating that gets removed as soon as the brakes are used the first time.

better brakes on a chevy sounds like a good idea if you dont want to over heat them and die if your racing it lol.

Your rotors are on the wrong side

Not really worth 2500

What mufflers do you use on your trucks?

I really wanna see this truck hitting some dirt trials with speed