I do most of that to all of my saws after each use. I restored an 025 a few months ago and an 026 about a year ago. I clean the sprocket cover after each use in the kitchen sink and if the saw is real dirty it gets a good wash, too. Hot water will not hurt a saw and the spray sink attachment will get rid of any remaking dirt, sawdust and oil. I then blow everything dry and put it out in the sun to dry for a couple of days. It takes me about an hour to clean and sharpen a saw after each use. I do block off the carb intake if I am cleaning that area. I clean or replace fuel filters once a year. I use Bosch WSR6F spark plugs in all Stihl saws or USR7AC in EPA saws. Cleaning starters and the flywheel side is a necessity, periodically. PTO side Everytime you use a saw. My favorite cleaning tools are paper towels, paint brush and a spray bottle of Purple Power. Good sense, always.

👌🙏

Pardon moi. je sui americain. ne parle pas fraincais bien. I can't find the correct carburetor for the 025C with the two ports. Do you have the model number for the correct carburetor? Je ne trouve pas le bon carburateur pour le 025C avec les deux orifices. Avez-vous le numéro de modèle du bon carburateur ?

@twosparkstroke9870

2 жыл бұрын

Hey! no problem, the correct reference for me is "Walbro WT 286 A" (watch my repair video on the 025 C I give the part references and the exploded view) Is your carb really out of order? because if it's a Walbro, I find them solid. With a membrane kit + needle it should start again;) Looking forward

SALUT SVP ESQUE VOUS AVES DES VIDEO CANSERNEN LE REGLAGE DE LA 025 MERCI

@twosparkstroke9870

Жыл бұрын

Salut ! des vidéos sur le réglage c'est ça ? tu peux regarder mon autre vidéo sur la remise en route de cette même machine oui.

Quel est le produit que tu emplois en spray pour nettoyer ?

@twosparkstroke9870

2 жыл бұрын

Salut ! j'utilise du "nettoyant frein", pour toute les partie collante / grasse / dur à nettoyer, si non de l'eau tiède, et bien sur chiffon, brosse à dent et compresseur à air