This is such a good tutorial video! You are so good at explaining ALL of the steps in detail while still keeping it brief and to the point. EVERYTHING on my car is seized SOLID and I have been fighting with wheel bearings and front end suspension/steering for over a WEEK now! What a pain in my a**!!!!! The last thing I want to do is disassemble ANOTHER seized part so I can break something else in the process lmfao After watching this video I'll be stretching the boot on myself instead of paying a garage hours of labour to disassemble everything and replace it. So thank you!! Just gained a subscriber for sure!

@wawayltd

Жыл бұрын

Thanks! Glad if it helps 😊👍

Excellent instructional video. No unnecessary yammering. Thank you!

@wawayltd

2 жыл бұрын

You're welcome 👍

Cheers mate that made me feel a lot more confident about doing the job thank u so much for the video

@wawayltd

22 күн бұрын

Cars are easy 👍

Well explained and very informative. Will have to invest in one of those cones and use universal gaiters in future. Thanks for taking the time to film. All the best Pete 👍

@wawayltd

4 жыл бұрын

Thanks for watching!

If you have trouble locating a Plastic Cone, like in the video, from your local motor factors/Halfords etc, XXL Butt Plugs from Ann Summers work just as well.

@wawayltd

2 жыл бұрын

Must be XXXXL 😁

Very well explained. I think ANYONE can now change the CV joint on their own.

@wawayltd

2 жыл бұрын

Thanks, Ken! Cars are easy. I am trying to prove that with my content. 👍

@kensinn2937

2 жыл бұрын

@@wawayltd I’m going to find a reason to change my CV joints now. Lol

very well explained .. who wants to help himself should follow you ... keep it up and best regards from germany

@wawayltd

4 жыл бұрын

vielen Dank 😎

cheers for this because i didnt believe it would strech over until i saw you do it ,big effort but did it yahoo

@wawayltd

2 жыл бұрын

Thanks 😁

A brilliant and informative video, thank you! 🙂👍

@wawayltd

2 жыл бұрын

You're welcome

Thank you, Excellent.

@wawayltd

Ай бұрын

You're welcome!

Thank you for a very clear explanation

@wawayltd

2 жыл бұрын

You're welcome 👍

very well explained good work and yes can be fiddly to do some times 👍

@wawayltd

4 жыл бұрын

Thanks Tim 😊👍

Great stuff. I love your videos. Very informative.

@wawayltd

Жыл бұрын

Thanks Danyo 😊👍

U can use either allen key or place a jack under the tie rod or ball joint and apply some pressure

Great video . . . . love this guy ! :)

@wawayltd

3 жыл бұрын

Thanks 😊👍

Very clever idea ... Well done

@wawayltd

3 жыл бұрын

The idea is not mine, but thank you very much 😎👍

Always great

@wawayltd

Жыл бұрын

Thanks

Great video

@wawayltd

5 ай бұрын

Thanks 👍

Perfect

I have an old pair of joinery pincers they seem to work to tighten these clips.

wow thank you

@wawayltd

3 жыл бұрын

You're very welcome 👍

Good video

@wawayltd

11 ай бұрын

Thanks

Very well explained, thank you

@wawayltd

6 ай бұрын

You're welcome 😊

@steveh9106

6 ай бұрын

The tube is a must I think, I've just split the rubber.....

@wawayltd

6 ай бұрын

Ops... Sorry to hear that.

@steveh9106

6 ай бұрын

@@wawayltd yes, me too, I'll get the tool and another one, lesson learnt

Thank you sir

@wawayltd

10 ай бұрын

You're welcome Trevor 👍

Hi nice video thanks. Whats your opinion on the universal split boots. you dont have to take anything off the car and just glue together.

@wawayltd

Жыл бұрын

I've never tried one. If you try - please let me know how it went..

CV Joint Boot Gaiter Kit

thank you for the post great video.would i need wheel alignment after this? ford mondeo mk4 petrol owner

@wawayltd

3 жыл бұрын

You're very welcome 👍 No, you don't need alignment, because your steering and rest of suspension remain unchanged.

@easyrider020

3 жыл бұрын

@@wawayltd thank you for replying and the video

What size bolts did you use to replace the rivets. I can’t get the ball joint off and would like to take those rivets out. Thanks

@wawayltd

2 жыл бұрын

It was pain in a bottom to remove those rivets, using drill, grinder, chissel, hammer and a ton of swearwords - we did it! I think we used 13mm bolts with 8mm thread.

@skinnywhitepipe1

2 жыл бұрын

@@wawayltd much appreciated. Thank you. Nice vid

La ce cuplu de strangere ai strans surubul de la planetară? Vă mulțumesc!

Just wondering if you use cable ties will it pass a MOT in the uk ??

@wawayltd

2 ай бұрын

Yes, it passes MOT, there is no strict rule on that. Although, looking back, I would recommend to use those metal stripes if you can.

Was it making any noises or was it just split?

@wawayltd

4 жыл бұрын

No, just split.

I have a spilt, how long do you think I should wait to get it fixed?

@wawayltd

2 жыл бұрын

It's hard to say, it all depends how big it is, how much you're driving, how dirty are your roads. Normally, it's not something you stop for and call recovery, but it must not be ignored - just replace it when you can.

@CdotPoppy

2 жыл бұрын

@@wawayltd thank you!!!

@CdotPoppy

2 жыл бұрын

@@wawayltd decided to bite the bullet and get a refurbished drive shaft.

@wawayltd

2 жыл бұрын

All roads lead to Rome 😊

Is this the same process for inner cv boot ?

@wawayltd

2 ай бұрын

Sorry, I don't have any experience with the inner.

Not a big fan of the plastic zip tie..You have part. Do it right. No need to N-rig it.

@wawayltd

3 ай бұрын

You're right. Going back in time, I would use the metal strip. Although, if something has gone wrong with it, zip tie is not a big crime 😉

Cable ties aren’t strong enough,

@wawayltd

2 жыл бұрын

I never had problem with them. I agree that metal clamps are better, but if you're using cable tie on the narrow side, it's not a big deal.

Im mechanic and i can tell u its not the proper way to put cable ties from rubber on a cv boot

@wawayltd

Жыл бұрын

Thanks, I know, it's not perfect, but it works.

⁸⁹⁹òò0888888888⁸7⁷⁷⁷89⁰98⁹ì

@wawayltd

Жыл бұрын

Exactly!

Nothing quick or unique about this. Same process on all cars

@wawayltd

4 жыл бұрын

I have a lots of non-unique videos on my channel. It's just meant for people who have no experience at all to give them confidence to start DIY-ing. I'm putting out a video about Ford rear brakes today - it's so boring, makes me sick 😁 But there will be plenty of people seeing it as a good guide... Maybe... Or maybe I should review my content..

@aqib2000

4 жыл бұрын

WheelsAndMotors you content is fine it’s just how I read the title as “Quick way to” therefore was expecting a short cut. Keep it up

@wawayltd

4 жыл бұрын

I'll try my best 👍

@wallacemassey1371

3 жыл бұрын

@@wawayltd .

@CookieHDMonster

3 жыл бұрын

@@aqib2000 NGL this is quicker than other options such as removing the axle head and then replacing the gator that way instead of cutting, stretching and then refitting. No need to be mean, your comment was not valuable at all :)

Thank you, Excellent.

@wawayltd

Жыл бұрын

You're welcome 👍