Best video of modification i have ever seen in my life

@Autophile

3 жыл бұрын

Thanks Kushagar :) It is my favourite modification and I'm proud of it.

@kushagararora2056

3 жыл бұрын

@@Autophile bhai plz muje Instagram pe message kro

@kushagararora2056

3 жыл бұрын

Bhai muje apni Instagram id do

@kushagararora2056

3 жыл бұрын

@@Autophile bhai plzz muje reply kro bhai plzzzzz

@Autophile

3 жыл бұрын

Here you go, Instagram @autophileyt.

Great mod 👍🏼

@Autophile

2 жыл бұрын

Glad you liked it 😀. Thanks for tuning in👍.

nice video! thanks. Where you get the las trim part to cut and adapt to the desire length?

@Autophile

3 жыл бұрын

The mirror and two plastic cover trims are Suzuki genuine spares. OE part no. for the cover trims - Lower 84781M61M00, Upper 84781M68P00. The Lower trim fits normally over the mirror stem, but I had to shorten the Upper trim according to available space. Used a hand saw blade to cut the top edge of the trim. There are two small tabs, which are necessary to hold onto the headliner. So I cut the trim in such a way to retain the original shape profile of the edge, including the tabs, and finally it should look as if only its length is reduced.

Which adhesive you used for fixing bracket in windshield

@Autophile

2 жыл бұрын

Took help of windshield repair guy. He put same sealant (black) which is used to fix windshield.

Is that reverse connection used to cut dimming while reverse?? And can I connect that to the reverse bulb while

@Autophile

Жыл бұрын

Hi Subith. Thanks for tuning in ✌️ Yes, your interpretation is accurate! The IRVM is configured to deactivate dimming while in reverse, enabling a clear and unobstructed view. This enhances safety by providing greater visibility. And yes, you can connect the positive signal from the reverse lamp. Hope this helps 🙂👍

Good

@Autophile

3 жыл бұрын

Thanks Harsh

Great mod! Thanks to your help, added this to my Elite i20 2018 Asta model. But I’m noticing my the IRVM isn’t dimming as much as I can see in your video. Could you help me out ?

@Autophile

Жыл бұрын

Hi buddy. Thanks for tuning in✌ Really glad the video's useful. If I may try to understand the issue you're encountering, the IRVM dimming depends on the ambient light intensity. It dims less in daytime in order to provide a clear view and more in the night to reduce glare. You'll notice there's a sensor at the back. You can perform a test by covering it with your palm, and shine your phone's flash onto the mirror. It should dim completely. In case you feel that it's not dimming enough, recheck the connections (+12v and ground) and confirm the voltage with multimeter. Hope this helps. Drive safe 😀👍

@kushagararora2056

Жыл бұрын

I have also installed in i20 elite asta optional 2017 after seeing this video mine is absolutely working fine

Which glue to use to stick the mount? Please suggest

@Autophile

Жыл бұрын

Hi Michael. Use some epoxy glue like fevitite. Give it a good day or two to set.

Is this compatible with Honda BR-V I really would like to get this installed. Could you please help me out which someone who can help me with the installation in Mumbai ?

@Autophile

Жыл бұрын

Hi Krisshna. Thanks for tuning in👍. Most probably, it would be compatible with the stock mounting bracket and rest is general wiring connection. Sorry bud, am not a Mumbaikar and can't suggest anybody.

Will the service centre offer this as an accessory?

@Autophile

2 жыл бұрын

Hi Hasnain. Thanks for tuning in✌. Assume you're asking for alto? Actually its not compatible directly. And requires custom installation. Service center likely avoid such special jobs.

I want to install Auto dimming IRVM on my S-CROSS?

@Autophile

2 жыл бұрын

Hi Akaba. This MGP mirror is an original part for Baleno, Ciaz, Brezza & S-Cross. So yes it can be added-on quite easily. Required Parts with MGP Code & Latest Price: 1. Mirror 84703M54P00 (₹3,811) 2. Roof Wire Harness 36820M65M20 (₹900) 3. Lower Cover 84781M61M00 (₹100) 4. Upper Cover 84782M61M00 (₹120) Here's a brilliant DIY thread from T-BHP to help you on installation. bit.ly/3BnQqyl (Full Credits & Kudos to OP 'car-dent')

Will it support reverse camera output?

@Autophile

2 жыл бұрын

This mirror has only auto-dimming function. No video display for reverse camera.

@skaran86

2 жыл бұрын

@@Autophile Thanks bro

So how good is the new irvm setup ? Is it worth the effort ?

@Autophile

3 жыл бұрын

Hi Aswin. Honestly, this DIY retrofit required little effort. Only challenge was the mounting bracket. After that, it was almost 'plug and play'. And I think I've managed to nail the 'stock look'. Speaking of the IRVM's utility, I could ask for nothing more. Auto dimming IRVM is the sole answer to the ever growing and selfish practice of people driving with constant high beams on "city roads". Trust me, this piece of technology has made driving a lot more comfortable and safe.

@aswinks8131

3 жыл бұрын

@@Autophile cheers mate ! Expecting More of your vdos :) 👍🏻

Sir Mounting Bracket come with this mirror or not? Please explain about wiring in so detail

@Autophile

3 жыл бұрын

Mounting bracket does not come with mirror. In my knowledge, the bracket is not available as an OEM spare part as it is integral with the windshield. Best way to get the bracket is, go enquire at a nearby windshield repair shop. They remove such brackets from broken windshields and stock them. I got one for Rs.100. The technician also helped me to permanently fix the bracket onto the windshield using sealant adhesive.

@PiyushSharma-oh4xk

3 жыл бұрын

@@Autophile thank u so much sir

@PiyushSharma-oh4xk

3 жыл бұрын

Can we connect this irvm with dome light wiring if yes then how?

@Autophile

3 жыл бұрын

The wiring is actually simple. Follow the video to identify the positive (4) and negative (1) terminals on the mirror. Take positive signal from cigar lighter socket and add a fuse. Route the wire behind dashboard and then along the A pillar to reach the mirror. Take negative signal from any body-fixed bolt which is nearest to the mirror. I took it from the sun visor mount. Here, I did not use a socket connector for the mirror. For that you will have to buy the original wiring harness. I managed to plug the wire ends over the pins as a quick solution. It works perfectly.

@Autophile

3 жыл бұрын

@Piyush The dome light has constant +12v wire. If you use this for IRVM, then it will be always ON. So take the accessory signal from cigar lighter or directly from dashboard fuse box.

Bro it is possible to fix a auto folding motor inside a normal mirror.i want to upgrade my hyundai verna 2010 model mirrors.

@Autophile

3 жыл бұрын

Hi 😀. So your existing side mirrors have electric adjust but not electric folding?

@vijaymorais5648

2 жыл бұрын

@@Autophile yes bro we can adjust the mirrors by electrically but there is no auto folding we have to fold the mirrors manually

@Autophile

2 жыл бұрын

From OEM, verna transform got only electric adjust mirror, no electric folding. Possibly some conversion kit should be available in aftermarket.

@Autophile

2 жыл бұрын

Meanwhile let me also enquire about kit / retrofit possibility.

@sachinmakhijaips

2 жыл бұрын

@@vijaymorais5648 yes I v done in Ertiga

Does this mirror compatible with hyundai i20 windscreen mount?

@Autophile

Жыл бұрын

Hi Subith😀. Yes, this mirror can be fitted on the i20 windshield mount base. Cheers👍

@subithsukumar4362

Жыл бұрын

@@Autophile can i connect reverse wire to reverse light positive terminal? does that auto cut dimming while reverse?

@subithsukumar4362

Жыл бұрын

Please share the WhatsApp or insta details. I am having a query. Please

I got honda city's irvm at 350 something, auto dim and fitted in the vehicle (Alto), I have reverse disable wire as well.

@Autophile

2 жыл бұрын

Alas, didn't think of cross OEM retrofit 😕. Came about City's low cost A/D IRVM, only sometime after installation. Great you went for it 👍.

@VPannagS

2 жыл бұрын

@@Autophile well I was initially bit skeptical to go with it coz it had five wires , had no information about that. However 300 odd was worth the trial and test method. Anyways hacked it atlast. Hahaha.. I also have added the door ajar warning lamp in the instrument cluster. It works really nice. Next plan is to add electrically actuated tail gate opener, raspberry pi infotainment with OBD and auto climate control in Alto. Man you are awesome BTW all the best!!

@technicalshubhu3507

2 жыл бұрын

@@VPannagS make a video on it!!!

@surajjian16

2 жыл бұрын

@@VPannagS please share the wiring details for reverse connection to the Honda mirror.

@VPannagS

2 жыл бұрын

@@technicalshubhu3507 will do it soon

Will fitting this onto an LXI model void its insurance?

@Autophile

Жыл бұрын

Hi Risav. Thanks for tuning in✌😀. Guess it shouldn't be of any concern. It's something that only enhances our driving comfort and safety. As long as installation quality is ensured, you wouldn't have to worry much about that.

Bro superb mod u hv done 👍 I also want to do this in my swift Are u okay If I buy all the required stuff and come to u for installation 😀 As I don't know wiring and metal bracket kaha milega mujhe

@Autophile

2 жыл бұрын

Hi Shubham. Very happy that you like it 🙏 So before proceeding further, think you should know this. The MGP d/n irvm is really expensive. Alternatively there is a low-cost d/n irvm from Honda. Refer these brilliant DIY threads on TBHP bit.ly/3nZNl1O, bit.ly/3G6NlmS. You can find the mounting bracket at windshield repair shop. Its same for either mirror (MGP/Honda). If you decide on MGP mirror, then also get the wiring harness 36820M68P30 for easy connection. If needed, will be glad to assist you for installation. DM me on instagram @autophileyt.

@prasir123

2 жыл бұрын

@@Autophile Thanks

@lemedico

Жыл бұрын

@@Autophile thank you for quoting my thread on TeamBHP. Unfortunately the Honda mirror is not available for that great price of ₹400 anymore. Its gone way double of the MGP one you've used

@honey.dudeja

Жыл бұрын

​@@lemedicolagva lia aapne??

@lemedico

Жыл бұрын

@@honey.dudeja yes, I did!

Kya ye swift me lag sakta hai

@Autophile

3 жыл бұрын

Hi Amardeep. Yes it can be fitted 😃.

Bro what's the price and from where i get this?

@Autophile

3 жыл бұрын

IRVM Part No. 84703M54P00. Either get it online via Boodmo (latest MRP ₹3,700) or place order at MGP distributor near you.

@pranaysaha1338

3 жыл бұрын

@@Autophile Thanks👍🏻

Swift me lag jaega??

@Autophile

Жыл бұрын

Hi buddy. Thanks for tuning in ✌ Yes, absolutely! You can install this auto dimming IRVM in Maruti Swift as well as any car for that matter. You'd need to affix the suitable bracket/button on the glass to mount the mirror. After that it's a simple task of providing +ve 12v and -ve ground. Hope this helps. Drive safe 😀👍

Bhai apne pins main se wire kaise lagai ?

@Autophile

3 жыл бұрын

Kyunki mere pass connector available nahi hai, toh maine ek shortcut tarike se wire ko connect kiya hai. Wire ke end mein ek needle insert karke, insulation ko thoda bada kar liya jitna ki IRVM socket pin wire mein insert ho sake, aur thoda tightly bhi. Kyunki wire ko upar se lagaya hai, tho woh apne aap disconnect ho hi ni sakta.

@Autophile

3 жыл бұрын

Please be aware that its only correct and safe to use a suitable connector. But you may try one trick. If you have, take a spare connector plug with female pins, and remove the pins from it. Then join the pins to the wires to connect with irvm.

@kushagararora2056

3 жыл бұрын

@@Autophile thanks bro 🙏🏻☺️

Auto dimming mirror for duster u have

@Autophile

2 жыл бұрын

Hi Mohamed 🙂. Think you got me wrong there. Actually I only do diy stuff on my own car. I'm not a parts seller. Thanks and keep tuning in 👍.

Tell me explain me it's process

@Autophile

3 жыл бұрын

First of all, purchase Auto Dimming IRVM, Cover Trims and Metal Bracket needed for mounting. Prepare a temporary wiring harness with positive 12v and ground wires and verify the IRVM working. Next, decide the position of IRVM on windshield and mark the place for bracket. Then, fix the bracket using strong bond glue. You may visit local windshield repair shop and take help for this. Let the glue dry for sometime and set well. In the meantime, prepare the complete wiring harness with positive 12v (ACC signal) and ground wires, and route till IRVM location. Finally, mount the IRVM, connect the wires and fix the cover trims.

@rajwindersingh4191

3 жыл бұрын

@@Autophile great, am in 😱 fear about this hard job, because I have a maruti 800 deluxe 2014 model

@Autophile

3 жыл бұрын

Fear not, and proceed with confidence. I can assure you that it is compatible for any car, as long as we feed the correct electrical connection. The IRVM is Maruti OEM genuine. Only trouble is getting the metal bracket. It is not sold separately by Maruti. Try local windshield repair shop for spare bracket (taken from broken glass).

More detail video please. And also product details.

@Autophile

3 жыл бұрын

Hi Manirul 😃. Will be glad to prepare a detailed video soon. In meantime, do refer the video description and post your queries here. Prompt response is assured.

@Autophile

3 жыл бұрын

The IRVM and trim covers are OEM genuine. The mirror mount bracket, even though a Maruti part, is not available in spares. Had to procure a used one from windshield repair shop. Maruti Suzuki Genuine Part Nos and Latest Price 1. Auto Dimming Inside Rear View Mirror : 84703M54P00 (₹3,811) 2. Upper Cover Trim : 84781M68P00 (₹24) 3. Lower Cover Trim : 84781M61M00 (₹100)

Bai kitne ka hai je mirror

@Autophile

Жыл бұрын

Hi Jaswinder. Thanks for tuning in👍 MGP part no. : 84703M54P00 Price : ₹3,950 Link : boodmo.com/catalog/part-mirror_assy_inside_rr_view-6788737/

Reverse camera worls in this

@Autophile

3 жыл бұрын

This IRVM has only auto dimming feature.

Is your mirror still attached ? Because mine fell down recently which was fixed with epoxy glue but lasted only 4-5 months and it fell down so now i've got it fixed with the same kind of black glue as you did from windshield repair shop , please let me know the status of your mirror so I can get some trust on this glue before going out trusting on this glue blindly and facing issues on the roads 🤣🤣🤣

@Autophile

Жыл бұрын

Hey Michael. Sorry to hear you had to go through such ordeal. Needless to say, epoxy glue needs careful prep and curing. Calling it brittle is a big understatement. Now, as far as the black sealant adhesive is concerned, you can absolutely trust it. It's used to fix a windshield on, which says enough already about its strength. And to give you more peace of mind, yes mine is fixed solid still and believably, it will be so forever. So rest assured and take joy in that glare free rear view. Drive safe 😀👍

@Michael-Pinto

Жыл бұрын

@@Autophile thanks for your response it helped me alot