Quick Tip - Exhaust Pipes and Clamps
Автокөліктер мен көлік құралдары
Don't forget to Like and Subscribe for more! - goo.gl/XtV9CJ
Here's one seemingly minor detail that can go overlooked with Diesel Exhaust Pipes and clamps. Something so simple can really slow down assembly and cause a lot of frustration.
Пікірлер: 23
Great tip on the clamps!!! My mechanics have replaced the gaskets five times and it kept leaking. I go out and check, sure enough they are on backwards!
@SFMARK69
2 ай бұрын
I’m leaking from the clamp closer to the turbo (2019 Cascadia) replaced seal and clamp 3 times and it still leaked causing smoke when burning off. This time I put new exhaust pipe, new exhaust manifold piece that 7th injector is bolted to , new 7th injector (injector housing, injector and seal) and new clamp and seal AGAIN! after all that it STILL LEAKED!!
Great tip. Something you could easily over look
Thanks for a educational vedio, exhaust leaks causes fault codes, and can lead you in a different direction in diagnosis, if you don't check for good tight exhaust connections!
@TheDieseler
6 жыл бұрын
+Mad Motor Repair That is very true. Glad you liked it!
Great video
I was about to swap my bellows for a flex pipe to save money but after your video I’m just gona spend the extra money and get the same part thank you
Thanks for sharing knowledge
Great tip
Thank you
Thank you Sir!!!
THANKX A LOT for education.
Thank u!
Sorry if I missed it, but did you say which orientation it should be? I.e does “steeper angle” side sit on muffler side or dowpipe?
Can u make a video on the isolator bushing on the gear stick on freightliner cascadia?
I’m leaking from the clamp closer to the turbo (2019 Cascadia) replaced seal and clamp 3 times and it still leaked causing smoke when burning off. This time I put new exhaust pipe, new exhaust manifold piece that 7th injector is bolted to , new 7th injector (injector housing, injector and seal) and new clamp and seal AGAIN! after all that it STILL LEAKED!!
👍
Thanks you are right I made big mistake Thanks
Wow I put everything new and still leaking i sure this is my probleproblem, tha k youuu
Men you are not lying man it's an headache I'm still trying to figure out why I'm still having leaks when I do Regen on my dd15 It leaks from the turbo pipe to the flex whatever that pip call flange Bell pipe whatever it's called and then the second elbow I think they sold me the wrong clamps I'm not sure what size or how or what.
@samyelalem
11 ай бұрын
I am having the same problem in the same location on my volvo. I have been through 4 clamps and 5 gaskets. It is still leaking. Did you ever fix your problem? And how?
@SFMARK69
2 ай бұрын
I’m leaking from the clamp closer to the turbo (2019 Cascadia) replaced seal and clamp 3 times and it still leaked causing smoke when burning off. This time I put new exhaust pipe, new exhaust manifold piece that 7th injector is bolted to , new 7th injector (injector housing, injector and seal) and new clamp and seal AGAIN! after all that it STILL LEAKED!!
New volvos don’t have bellows. You have to buy the whole turbo flex pipe and it’s $1400 CDN. WHAT A RIP OFF