QUICK TIP: Enable 4th and 5th Axes in your Post Processor
Ғылым және технология
Looking to enable a 4th or 5th axis in your Fusion 360 post processor? Many of our posts are written to support multi-axis code, but the additional axes are disabled by default. See how easy it is to enable these axes manually in the post configuration file, or through post properties! View a written version of this guide here: knowledge.autodesk.com/suppor...
Parameter Details:
actuator: Specifies the actuator type (ie. either "linear" or "rotational").
The default is "rotational".
table: Specifies whether the axis is located in the table or the head. The default is true for table.
axis: Specifies the axis vector as a 3-element array (e.g. "[0, 0, 1]").
[Axis rotates around X, Axis rotates around Y, Axis rotates around Z]
ex: A-axis rotating around the X-axis would be: [1, 0, 0]
offset: Specifies the axis offset as a 3-element array (e.g. "[0, 0, 25]").
The default is [0, 0, 0].
coordinate: Specifies the coordinate used in the ABC vectors (ie. "X", "Y", or "Z"). The given number will define the letter for the axis:
0 = “A”
1 = “B”
2 = “C”
Note: This is the only way to influence the axis letter for the output.
cyclic: Specifies that the axis is cyclic. Only supported for rotational axes.
Only used when a range is specified. The default is false.
range: Specifies the angular range for the axis in degrees as a 2-element array (e.g. "[-120, 120]"). You can also specify a single number to create an axis for an aggregate.
The default is unbound.
preference: Specifies the preferred angles (-1:negative angles, 0:don't care, and 1:positive angles). The default is don't care.
resolution: Specifies the resolution. In degrees for rotational actuator. The default is 0.
Download Visual Studio Code: code.visualstudio.com/
Find post processors in the online post library: cam.autodesk.com/hsmposts
Get more detailed information on post editing: cam.autodesk.com/posts/posts/...
►FREE TRIAL | autode.sk/2uLm8a6
►SUBSCRIBE | autode.sk/2q61ZpD
►GET STARTED | autode.sk/2HaB2Jk
CONNECT:
INSTAGRAM | autode.sk/2Enzh8P
FACEBOOK | autode.sk/19jII5A
TWITTER | autode.sk/19jIJXc
Пікірлер: 10
Thank you for the educational content
Nice job. Visual Studio Code is great.
Thank you so much!
thank you very much i love you.
How do I enable my 4th axis if that part of the code is missing? It skips to the "if (!machineConfigureation.isMachine..." line.
Hi does anybody know how to tell this exact post-processor to offset my Y and Z axis when and only when my A axis change from zero to another value within it's range ? , because all of my operations work just fine, but when A axis is moved the system coordinate seems to change. Thank you
My machine has 4th axis but all 4 axes cannot run simultaneously. any 3 axes (xyz or xya or yza or xza) can run simultaneously at a time. how to edit a post so that it uses 4th axis but outputs code in such a way that only 3 axes run at time ?
@zerspanungamlimit
3 жыл бұрын
same question from my side
@neildcosta
2 жыл бұрын
This is because of your machine CNC controller. Let me guess.. are u using Fanuc Oi Mate series controller ?
Hi can you help me to solve hurco post processor problem