Thank you for this video! Shop wanted 700$ to replace 1 connector, 1 ignition coil and 1 spark plug

@bundysgarage

Күн бұрын

What a rip off! Glad I could save you some money!

They asked $60 for each connector replacement! U r a national hero 😊

@mushe043

9 ай бұрын

Took me 10 mins to replace all 4

@fardeen6191

8 ай бұрын

Wow for 60 dollars i can change the whole wiring harness of the engine here in dubai

@linhchau9788

5 ай бұрын

Yep bro . That's call easy labor. 4 connections for 250, you can do it yourself and save 💪

@asdfasdf-zt8vz

4 ай бұрын

They were trying to rip you off big. No way in hell it should cost that much

I just replaced 3 of my coil connectors on my sienna using your tip. Greatest thing ever!!! Thank you!

Excellent and to the point video... that's the way they all should be! One note for those who are doing this... just do one wire at a time connecting to new aftermarket connector on your original harness. That way you don't get the wires crossed. Be sure to take pictures of your original connector wire setup just to make sure you get them reinserted in the new connector in the right order. Thanks again for a great video!

Thank you; thank you; thank you!!! I had purchased the replacement connectors and also purchased a cheap set of pin removal tools but was getting frustrated trying to remove the pins based on watching a few other KZread videos. Your video was so clear with the green laser pointer-ingenious!

Solved the stuttering idle on my left 2005 Camry LE.. Note: when you take off your existing clips, look inside the coil plug in for trash/plastic from the old clips the disintegrated. I had trash in almost all of them. Now my car runs great again! Thanks!

Thanks. Ordered 6 from Amazon for $13. Old ones broke as soon as I touched them to change plugs. 230,000 miles and 17 years later.

Very well illustrated. Thank you.

Spray the old connector contacts with electronic contact cleaner, it is much easier.

Thanks for sharing the video, especially, the illustration on how to push down on the plastic tab to release the wire from the connector.

Thank you, I was waiting for one month to do this job in my Camry 2010 and this morning when I watched your video was so easy, Thank you.

I just watched a 20 minute video on this with no result Your a legend mate 'thank you

Excellent. Marvelous instructions. Thank you for no music amusement!

You're a life saver bro - thanks for posting this video.

Awesome video! Clear, concise and he even added a diagram 😭. Make more please lol

Thank you im going to try it out. My harness is clipped by zip ties 😂

Short and Sweet!!!! Thanks!

Massive help!! Thank you!!!!

Very clear directive. I have just replaced mine. Thank you loads.

@bundysgarage

4 ай бұрын

Glad it helped

Very clear explanation 👍👍

Thank you boss!! Great video

Saved me from splicing my 1nzfe harness thank you man

Thanks for information. Now, I can fix the broken connector in my wife's car

U r great and u said it stray to the point ❤❤❤

Awesome, thanks!

Great! Thank you. When you stick old wire into the new clip do they click and lock automatically or do you have to do anything? Thanks for posting!

Mouse chewed through one of the 4 wires. Any chance I can only replace the one wire end to end? Also, how far does that one wire extend? I don't want to make a mess of the loom and tape job.

Have a p0355 code , in Chrysler lhs , changed spark plugs, changed injector, changed coil, change camshaft sensor still giving me p0355, any suggestions?

Great, thanks.

Thanks brother

Thanks

thanks

Got my connectors for 12.00 a piece at Toyota dealership

What if the wire is what it is broken? Had a rat get in and make a nice home right in top. Do you have how to reattach wires to a new connection?

Nice video thanks 👍

Taking the liberty to do this myself. I’m not made out of damned money.

@SafeTopps

7 ай бұрын

Update: I fixed it with my dad 😎

I can’t find the connector for a 96 Toyota Camry le 2.2 for the camshaft position sensor connector. Can anyone help please

@bundysgarage

9 ай бұрын

Call 909.588.3276, ask for David in Parts. Tell him Bundy sent you, he will help you out. Make sure you have the VIN

Did the terminals on the OEM wires fit perfectly into the aftermarket connector or did you have to make adjustments?

@bundysgarage

2 жыл бұрын

The connectors on the wiring harness fit perfectly into the aftermarket connectors.

@miriamvivo4279

2 жыл бұрын

Short and sweet. Stealership wanted $ 300 for replacement

@TheDesertRat31

2 жыл бұрын

@@miriamvivo4279 wow . I got Toyota connectors for $9 a piece. Just the housing, no wire stubs

@JoseCardenas-tv6vv

Жыл бұрын

@@TheDesertRat31 I picked mines up from Amazon , 4 pack of connectors like the ones in the video, for $12.99 .

I wish I’m dealing with a hack job. Have to cut n splice.

Why go through all that trouble when u can connect the wires to the ones you ripped out of the original connector? I used a butt splice connector crimped the old wire on one side. The new harness wire on the other and away I went.

@KangRoundHere

Жыл бұрын

I have this same question. I bought the whole plug with the wires thinking I would just cut the old wires and use a connector to re-connect them and replace the entire thing. Why should we NOT do that?

@Killian665

Жыл бұрын

Because that’s ghetto as fuck, this is much cleaner install.

@Afrattzz1

Жыл бұрын

It’s better to use the factory wiring in my opinion. You can buy just the plastic connectors on amazon

Someone glued my pigtail connectors to the ignition coils....I got a cylinder 3 misfire aww damn lol

Saved me $100 diagnostics fee at a garage.

That and VW connectors keep me busy haha

Or you could just buy the connectors

Thank you very much ✅

Why not just splice the wires on the connector and splice onto the other wires on the car?

@chrispyfer7721

Жыл бұрын

Why not be a hack the rest of your life?

How come not just leave them and connect them directly via their corresponding wires? I mean, isn’t that why they leave them long enough to just strip and tape off?

@jonjon5692

6 ай бұрын

You could, but this job is way too easy to go through all of that. It took me 30 minutes to complete the entire job.