- We appreciate your Support and Purchases! -Find all the parts for your VW or Audi! - www.shopdap.com/ Ignition Coil Connector with Terminal Tool www.shopdap.com/ignition-coil-connector-20t-tsi-fsi-25-5cylinder-vw-audi.html How to find Misfires on your VW or Audi (Pre 2015 Models) kzread.info/dash/bejne/oZ1sw8mzobe8hrw.html

Thank you for taking the time to make this video. As someone who owns a 2.0 TSI VW, I really appreciate you illuminating this murky subject!

Rock solid. Splintered two of mine changing coil packs trying to clear a misfire code, and stumbled on this. Ordered replacements from Deutsche and had them in within a few minutes. You can do it, my people!

Bought connector from you after watching this video, but it was the wrong one! Had to end up buying mine straight from the stealership for half price, but at least they’re fixed now. 🙏🏼

I’m frustrated that I can’t source a taillight socket anywhere. But maybe this video will be my work around. DAP, your videos are really good. Thank you

Nice vid! Great to see you have an easy replacement kit. I will be sure to buy from you guys when I need one.

Very nice tutorial! I didn’t realize the connector could be replaced, I thought one would have to replace the entire wiring harness.

@smkinrade

4 жыл бұрын

That'd be silly

@dennisakoglu2718

Жыл бұрын

So no need to change the wires just the connectors and all good?

@tedjohnson64

Жыл бұрын

@@dennisakoglu2718 Hi Dennis, you're correct: just need to change the connector. The wires usually don't get damaged, but the connectors get damaged all the time because the process for properly disconnecting them is not obvious, so people tend to manhandle them and break the fragile plastic. Therefore it's actually really nice that there's a way to replace a damaged connector without having to replace the whole wiring harness :-)

@dennisakoglu2718

Жыл бұрын

@@tedjohnson64 thx for advise bro

This was very informative, Paul. I had no idea they were fairly easy to replace. I was sweating it when changing plugs a few months ago just waiting to hear that familiar “snap” of plastic breaking.

Thank you so much for this video it kept me from breaking mine and I was able to get it off instantly after I watch the video and I'd already spent 20 minutes trying to figure it out myself😂

@jamesfranko5098

5 ай бұрын

It shows you how bad the design in that it's not immediately obvious how to work it.

Great video, I'm gonna be doing this now.. I thought it was normal to have a wrestling match with the connectors

Thanks for this video. I just replaced 2 connectors and saved lots of $.

Thx u man! The best explaining & understanding video about this connector situation on YT…. I was going to give up but good thing I had found your video…❣️🤞🏽💯

Paul thanks for the video. I need these connectors since all 4 are broken on my gti and I’m going to buy it from you guys 😎 👍🏼

@Deutscheautoparts

4 жыл бұрын

Thanks for the support. We appreciate it very much!

thank you on behalf of my r36 for an easy brand new connectors install :D

Rat chewed up my camaro electrical wires connectors, deff needed this thanx

very helpful, thank you. now I'll go buy some replacement parts from your web site

Sorry, I have a MK6 Golf TDI, but I did enjoy learning and the video. Please continue the relaxing content. What is the plan with the touareg?

Awesome thank you this is very thorough much appreciated...now I can buy a VW tiguan and rest easy :)

Great video! thanks for making this video, it is very helpful.

DISCONNECT THE BATTERY lmao

Thanks Paul! You saved me an expensive visit to the dentist as I was about to rip those damn connectors off with my teeth

I have no fire on cyl 1 after intake manifold replacement. It's not coils or plug, but I did damage the connector a little. Could that be the reason or is there anything else it could be, like a fuse?

This is the simplest, quickest not to mention cheapest fix that no pro mechanic fixes ever.

@phonkyfeel1

8 ай бұрын

Ok?!?!

Thanks man your video helps me

Thank you, very helping video

Thanks for detailed explanation, great video, do you need to disconnect battery before you work on coils adapters??

What size terminal tool do we need to use? I need to replace a connector plugged into my intake

Is it possible to buy just the terminals for the wiring? My connectors are not broken but noticed that my terminals looked oxidized. Used some electric terminal cleaner in the mean time.

Good intel 🍻 bought one and prior things and future things. I appreciate the great instructional videos. Showing support in return by shopping for parts from Deutsche Auto Parts is the least people can do.

Love the ending!

So mine is an Audi A4 2007. I changed the coil packs twice and the spark plugs. Still had an issue with #2. Would this connector fit on the audi?

I finally got around to doing this on my Tiguan. It really wasn't as hard as I thought it would be.

great vid man

This may be a crazy question but are the connectors for the coil packs the same used for the tail lights? I have an '06 A3 8P. Thanks.

best video on coil connectors info/instructions clear and easy perfect for an vw owner,showed me how to remove the wires correctly. #skylog #Ayiinmyke

Is this good for all engines with them? I have a grand Marquis

I pushed down on mine and they snapped. The tabs were really difficult to push down. Using a 90 degree pick is probably easier.

Does it have to specifically be this one because I bought a genuine one and its the right piece just my wires won't snap in so does it have to be this one?

Can you make a video on a bad dsg dmf I’m so confused on how to tell if mine is going out or not

Ive got s 97 lincoln town car, check engine light was flashing and rough idle and hesitation/shakes when accelerating. took it in to get the spark plugs changed. And it Was worse , checked the engine and a coil connector was unplugged so i plugged it back again and its driving better but i got another flashing engine light today. Thinking maybe its the coil connectors? Or one of them ? They look old a tattered. What should be my next move to get done at the mechanic ?

Only reason Im watching this is cause one of my wires broke off from the back and I needed help on how to fix it good video btw

Nice video Thanks!

Hi don't you have a video to replace a ignition coil pack on the golf 5 gti fsi {bwa} engine

Hello, My Audi doesnt have this connector on Turbo Sensor, will this type of connector which connects Coil work on Turbo ??

I broke 4/5 of these on a 2010 2.5. I will buy the replacements from DAP! Do you need to disconnect battery before doing this or is there no risk of some sort of electrical damage?

Hey guy help me out I forgot which colour wire on which pin no. (1,2,3 or 4) I don’t know & the is a heavy misfiring

Do you have these for a 2016 3.6L V6?

Where can I get the lock ring and connector seal separately?

Very informative, I am going to fix the one I broke on my 1.4tsi ACT CPTA engine, only thing is what kind of terminal tool will it be? I would order from you guys but I live in the UK and don’t fancy paying £10-40 in import duties, I have seen a laser branded one which I have good experience with (with their thin spark plug extractor) part number 3932 ☺️✌🏻

Very great video

Excellent info..

Is this the same with the mk7 gti? I have a 2015 gti and want to replace the one I broke.

hi , Humble mechanic , my scirocco 2.0 tsi need a fuel pressure sensor replacement can you please do a video on how to do it? cheers

Hey I have a 2004 Nissan Marano I got a tuneup and cylinder one still misfire what could possibly be the reason why only one still misfire

Super helpful!

Mine is really bad - can replace the complete harness? Is this available at your online store?

Great work guys, I'm about to attempt the same thing, I'm going to refresh my wiring as well,

When I did this I didn’t unhook the battery in two of my plugs soldered together in now I have no spark do you know what could have happened?

Is that the same connector as the fuel pump? (2004 Passat)

Do you sell the connector for a 2018 Tiguan MAP sensor? The one with the gray tab?

Great video!

Where can i get a terminal tool like that one?

Same for mk7’s mqb engine?

Hi there, if the number of the wire is not correct. What will happen if we try to start engine? Thanks

Where can I order a new wire with terminal on it ?

Great video

Hi where can I buy the pin tool ?? Thanks a lot

When will you continue on the VW touareg I have the same engine in my Audi A6 C5 and I want to know what will you do next pleeeeeeeease

I broke a purple locking tab is there a place I can buy replacements?

Very good videos

I just broke 2 of them trying to replace the coils. now I have utra crap idle, and broken connectors.

hi mak i thank you so mushe -you helped me

where can I get the terminating tool from?

Thanks 🤩

could a damaged connector cause the vehicle to misfire?

@petervazquez5668

Жыл бұрын

Yes.

@YourPointOfViewPodcast

Жыл бұрын

Yes mostly definitely

@StaccatoRedFox

Жыл бұрын

Yes

@babywipes1032

Жыл бұрын

yes, if it doesn’t throw a check engine and it’s misfiring change spark plugs and then check the packs, if the connector clip is cracked it could be not seating all the way down and causing misfire

@davidclifton6666

5 ай бұрын

Yes, most definitely

I have 2 broken. I’ll be buying!

Hey so I broke two. Could this cause a code to say multiple cylinder misfire? Engine runs fine as if there isn’t a problem and not check engine light… weird

Would this work for a 1.4 tsi Jetta?

Apricated sir , plz teach us how to replace camry 2007 2.4 MAF connector , I found 2 times when i am gonna fix its break even I baught special pins open tools form amazon but still cant open ...still all over youtube no one uplaod any video regarding camry 2007 MAF sensor connector replace or repin...many thanks

Can a broken ignition coil wire connector cause a misfire?

I feel like I should buy a connector from you. And none of mine are broken.

@gilbertfranco4163

3 жыл бұрын

Ere 4xe,xx,,x3,,,3xx3x

@laconabrown2084

Жыл бұрын

I want to buy connectors from them too, and mine are probably broken, but I spent all my money on gasoline cuz I'm running too lean. Uuuggghhhhhhjh pray for this girl, much needed.

Hoping I can do this exact thing on my 2015 Hyundai Veloster Turbo. Not sure though.

I have used a paper clip bent just right to release those pins.

@springfever2002

2 жыл бұрын

I just wanted to say thank you for your comment. I was struggling with trying to get the connectors to release and the paperclip method worked 💯.

Thanks, I have to replace a couple of connectors. They became brittle after 20 years...

Is this the same for a 1.8t

Just my clip broke. Can I continue to drive with a single broken clip?

Hi, my name Genival, very good video I have a Passat highline 2.0 turbo When I changed the connectors I forgot to take a photo of the wires, Could you send a photo of the thread sequence? Thanks

Unfortunately mine broke and will not stay on so now I can not drive it till I replace the connector

Paul help please I have an engine that shakes badly after we thought the problem was the injector!! Well, we had to change one of the injector's but the rugh throttles and shakiness still there!!! What do you think it is the problem mate!!? AHH!!! I've got a 1.6 TDI VW engine by the way. Thank you Paul

Hello! Might be a longshot but i really really need help with my Volkswagen Tiguan 2012 160HK Engine code: CAVD, CTHD. I've had my car in to the local workshop/repairman who has changed all 4 Ignition Coils, all 4 Spark Plugs and also tried to change positions of the new Ignition coils with each other to see if the "code-reader" the pc or whatever i should call it would say anything new. Translating with google on alot of these things, sorry for that. so to the problem: The scan/reader gives error messages: P035100, Passive/sporadic, ignition control cylinder 1 malfunction. P230000, Passive/Sporadic control ignition coil 1 short circuit to goods P050700, Active/static, idle control speed above the setpoint. P227900, Active/static, leakage air into the intake system. P030100, Passive/sporadic, 1st cylinder combustion ignition located P130A00, Passive/sporadic, cylinder removal(Maybe should be cylinder opt-out) P030000, Passive/Sporadisk, combustion fault ignition located First it only showed the passive/sporadic error codes the first 3 times i turned it in to the workshop. Then more came. The car can work normal, but the engine light is on. then suddenly the car can start "shaking" and the more i try to accelerate the more it shakes. As said before. The repairman has tried to change all ignition coils and all the spark plugs. Now he said i could try and search around on the internet to try find what is needed. He is pretty old and not that good with computers, that's why he asked me. Please, can u help with the problem ?

Do you need to unplug the car battery ?

I'm having a problem putting it back after valve cover seal replacement

What if all the wires are black? I messed mine up on 2011 Altima and smelt a burning smell..HELP

What if you don't have that releasing tool for the wires? Can you splice all the wires with the new connectors?

@clayniemann2608

Жыл бұрын

I wouldn't. The tool is best, but if you have new connectors the old ones will likely just fall apart. The little plastic piece separating the wires facing the coil is thin and usually brittle. Most fell apart when I did mine, but you could do the same thing by breaking it off with some needle nose. Pull it forward. Pull the wires out the back. Just be really careful with those wires.

this happened to me just today. Tried to figure it out how to remove these clips but accidentally broke off the clip you need to push in order to slide it out

Could you guys please do a video on a MK6 GTI reseal cam cover.

what is the part number for this is it a VAG original part? i found the ones that need you to cut wires and stuff

@ZuzpiciusAir

3 жыл бұрын

Also it's not in stock in your webpage

I was gonna buy the tool from yall but it says its on backorder 🙃

Hey guys after watching this video I was stoked to go put new connectors on after seeing how easy it looked...I forgot to DISCONNECT my BATTERY and while unplugging them from the rear two of the wires touched making a little zap. I finished putting all the new connectors on and now my car will crank over and will not start.and now hood is flashing red on dash. What do do,Did I try the computer or is there a fuse or relay I should be looking for?please help me..

@Lovely_planet

2 жыл бұрын

just did this lmaooo

@Lovely_planet

2 жыл бұрын

btw its the 20a fuse in fuse relay number 8 under hood under windshield wiper tank on drivers side (left hand drive) replace and should be good to go.

@Bobbybauer1

Жыл бұрын

@@Lovely_planet I didn’t disconnect my battery either. Now I have a rough start/idle and check engine light. Same thing?

Hi what ob11 reader do you use?

@Deutscheautoparts

2 жыл бұрын

www.shopdap.com/nextgen-obdeleven-ios-android-vw-audi-scantool.html