Quick Beveling Trick
The Doc is in with a quick tip to help you with your pipe layout. You already have soapstone to help you mark up your work why not let it help you with your layout?
#pipewelding #fabrication #quicktip #worksmarter #soapstone #pipewelder #welding
Пікірлер: 36
I’ll just do what I always do and use an orbital pipe torch to set my bevel perfect every time. Sure it’s cheating but it beats the hell out of having to grind every time.
Nice and simple. Goodin !
Sweet! Tricks of the trade 🇺🇸💪
@nathanhawee5373
11 ай бұрын
That was the first thing I was tought islts all about the trix
Should be noted wall thickness matters..
@righe8701
11 ай бұрын
100% right there. This would only work on a certain thickness
Been there ALOT my friend, good advice. Time saver right there
That just gives you thickness of the soap stone. So wouldn’t this only work if that was what you needed, or am I missing something?
That’s a pretty cool trick man like it I haven’t done much pipefitting in the last couple years but I’ve been known to throw some black iron around myself to steam boilers hydronic boiler’s, million and some BTUs over the years. Oh yeah.
Or grab a grinder and get busy. What a waste of time. Not that hard to bevel by eye.
@righe8701
11 ай бұрын
Thank fuck its not just me... why must people over complicate shit. If you cant bevel by eye, I don't wanna see your welds
@peterthethird7132
11 ай бұрын
Oh wow true professionals here. Doesn't hurt to take a few seconds to do something that will help you 😂😂
@righe8701
11 ай бұрын
@@peterthethird7132 few seconds. It's like 3-4 minutes you could have already done a pass around in the time to fuck around re sharpening your soap, (waste) finding your pen again, colouring it in. When all you have to do is shape down to the inside then maintain the same space by eye around. Its just useless info for views. Find any real welder that has to work under pressure and ask them if this is a good idea and worth the time...
@peterthethird7132
11 ай бұрын
@@righe8701 it's good to do layout in your first few times but then when u get good at that u can eyeball all u want. U gon bevel it shitty your first few times that's why it's good to "waste" 2-3 minutes marking so u get good product instead of "eyeballing" to go faster and end up fucking up trying to rush n then waste time trynna fix that.
@righe8701
11 ай бұрын
@@peterthethird7132 have you ever grinded a bevel? If your learning to do it from KZread for diy purposes, maybe I'll agree trying this. But this only works with that profile of steel it's not universal for bevelling. It's better to learn the correct way off the bat. This is still a waste of time, has nothing to do with being faster doing it by eye.
nice good
Want practice? Start welding on your gas line.
What's the angle of a bevel pipe?...use the right degree angle tool..to check for the right deg.angle...
Did you place the soap stones like |\ Or |/ 🤔
@alchemistld913
11 ай бұрын
|| like this
@louistowers526
11 ай бұрын
@@alchemistld913 just find it interesting how he puts the 2 together and is the sloped stone facing his left or his right in order to create the gap?.... Edit: because if both was perfectly straight 'sandwhiched' together would there be the gap?..
@ClayPro11
11 ай бұрын
@@louistowers526it would only make a gap one way... and he literally shows it in the video
@TM-dh2xb
11 ай бұрын
The square cut piece rests against the square cut edge of the pipe. For the beveled piece, the side with the smaller face is held against the square piece, so that the "point" or "tip" of the bevel stands off a few millimeters. You could essentially do the same thing with a compass. Just set the size you want, the run the needle tip alone the edge of the pipe, with the soapstone "lead" drawing a line on the face of the pipe all the way around.
@ConcordEditing
5 ай бұрын
|\|
Where do yall find scrap pipe like that?
Good to know… yeah I’m always given ol boy the ol fashion fish mouth
Do it for 30 years , could grind that to perfection in 3 minutes, mate gapping what’s the maximum in the USA, we’re only aloud, 10 % of the thickness, ie 20 mm 2 mm , sorry about the metric, 😊
It's not rocket science.
Spray dye and a pair of calipers is faster
"Promosm" 💐
What a waste of time. 1st year apprentice can bevel that with his eyes closed.