i wish there was an RTA display on the background of each PEQ, its my only problem. otherwise love my qu-24 plz guys include it on a futute update it will make our lives much easier

@AllenandHeathUK

5 жыл бұрын

Hi Steve, Unfortunately, there are no plans for this to be implemented on Qu at the moment, however, I wouldn't say it will never be considered in the future if it is possible. Thanks! Alex

@stevekarami9793

5 жыл бұрын

thank you guys for the reply (you have the best client support by far), i think it would be a nice adition to this allready powerfull mixing consoles

@rostislavradilov1563

5 жыл бұрын

Hi Steve, Just to say that there is a such option IF you use Android device!!! The name of the app is Mixing Station QU Pro. The app is working absolutely fine in a REAL situations! There is some better functions than the original iOS apk I think. See the link: play.google.com/store/apps/details?id=com.davidgiga1993.mixingstation.ah_qupro&hl=en_US

@gerardbarnes153

4 жыл бұрын

Is there an RTA display on the background PEQs of the SQ series? And does it show up on the app as well?

@deemus133

3 ай бұрын

@@AllenandHeathUK Is there a work around for this?

Are you using an RTA mic? If so what patch are you plugging it into and how are you managing its gain structure?

@AllenandHeathUK

3 жыл бұрын

Hi Daniel, Keith isn't using an RTA microphone in this demonstration. He's just kept all of his channels live and increased the level of the mix until feedback occurs. If you wanted to use an RTA microphone with your Qu, you can plug this into any channel and then press the PAFL key for that channel. This will feed the signal into the RTA in the Home > RTA screen. Thanks! Alex

Hi, just a quick question, on the sq5 series, do i need to leave the master level all the way up or should i put it all the way down after i have remove the feedback? Thanks!

@AllenandHeathUK

4 жыл бұрын

Hi Rico, It is good practice to leave channels live when tackling feedback, as this will emulate the conditions you will experience during the show. Thanks! Alex

Nice 👍

What's the easiest way to zero out the graphic EQ so I don't have to make a perfect line with the faders myself? The reset button doesnt seem to do it for me.

@AllenandHeathUK

5 жыл бұрын

Hi PJ, Please hold the reset button down followed by the GEQ fader flip button., this will reset the GEQ. Kind regards, Luke

I'm confused by why most of my pk lights are going off all the time even with no microphones in the mix. Is this normal and what does it mean? How would i know then which frequency is indeed feeding back. I tried consulting the manual but it doesn't offer an explanation.

@AllenandHeathUK

4 жыл бұрын

Hi Turkaljd, I recommend going to support.allen-heath.com to start a support ticket, we can then look at what exactly is happening on your system. Thanks! Alex

I know this was a few years ago but i am using the Qu-SB (just the iPad). Does this have an rta?

@AllenandHeathUK

Жыл бұрын

Hello Mike, It does indeed have RTA. This can be found on the Home section under the Meters tab. Thank you, Rafael

@mikeavento8066

Жыл бұрын

@@AllenandHeathUK Thx a bunch ! Found it.

I have tried this using my QU16 and while I can produce feedback and notch the frequencies by ear I am unable to get any visual indication via the peak lights of each fader. What am I doing wrong?

@AllenandHeathUK

3 жыл бұрын

Hi! You need to press the GEQ Fader Flip key to change the fader strips to control the GEQ. The channel strip LEDs will then show the peak frequencies. Thanks

@thelonelyhearts9660

3 жыл бұрын

@@AllenandHeathUK I've done that. The only difference is that I didn't have the PAFL selected. This will only work if the PAFL is selected - is that correct?