"Whatever it takes to get on the list" I like this guy!!

I dont know which is better. The fire cracker intro or the stock duramax making such a huge number on the dyno. Both are awesome!

Looks like the motor was going to come right out love it

Awesome❕l run a stock L.B.Z., SURPRISE - SURPRISE. I thought the last pull , well was the last ever pull! Dang, that is one stout stocker. Thanks for sharing 👍. 👌🏻👍✌🏻🌤 🇨🇦 😎.

Mark my words I will be on that list ! Love y’all 🙌🖤

Im a Dmax fan 1st & foremost but I was wholeheartedly expecting sparks, smoke, coolant, oil, and bits of hot metal on the floor! The stock rods aren't well known for surviving 600/700hp. Impressive!

@warrior641000

2 жыл бұрын

You and I both. I could hear my LML outside quivering once they smacked 1200. I figured the crankshaft would become quick disconnect

@100pyatt

2 жыл бұрын

Tuning is a huge determination Factor in HP/Tq durability

@mytmousemalibu

2 жыл бұрын

@@100pyatt Absolutely, im sure his tune was a big factor in that working, limiting torque, etc. They didn't lay into the spray till it was already up into the pull pretty good, any early probably wouldn't have turned out good.

@ATVer85

2 жыл бұрын

I agree with all of these comments! Pucker factor!

@c177pilot8

2 жыл бұрын

It’s not the horsepower that hurts them it’s the torque. Try to keep it under 1300 and they are fine.

She was on the raged edge!! the 300K loose is fast lol

Holy crap!! That intro deserves a like by itself!!

Talk about a sign or perfect timing or what. Always wondered if you guys messed or dealt much with duramaxs. Finally getting back into the process of building a 427 stoker s475/gt55 possibly 400% not sure injectors atm with 14m pump

That was intense! More rpm and more nitrous ftw!

That looked like a lot of fun! Will it do two of those runs???

@FirepunkDiesel

2 жыл бұрын

Doubtful! We were shocked it did one!

That’s crazy on stock head studs

@rc4lifebnsf

2 жыл бұрын

I’m at 310k on my tuned stock lb7, stock head bolts and I’m nervous when she’s gonna blow hg’s lol

I bought my 06 LBZ Duramax because I liked the sound . It's still my work truck and everyday driver

That’s crazy I was waiting for the Boom.

This makes me wanna come out there. 😎

@FirepunkDiesel

2 жыл бұрын

Say when

@builtbyme

2 жыл бұрын

@@FirepunkDiesel i live in NJ but one day for sure.

So is the variables same on the Cummins dyno pulls ??? Are they also on spray and the same setup ??? I’m good on fuel only as that’s real world scenario & reliable .

"Well, it ain't doin that twice......." 🤣🤣🤣🤣🤣🤣🤣 RJ was pretty calm and collect about scatterin the ol girl or makin the board, until he makes the board and seems a bit tense lol

I’d like to see a 5.0 Cummins pushed. Bet you’ll detonate the transmission before you blow an engine.

Is this not a record on a stock pistons/rods for an LLY?

😱😱 woow impressive for a Isuzu lol 👏👏👏👏👍👍 wonder how much spray it will really take? I say give her more an let find out 🤔🤔🤔

Hey guys glad to see ya'll strap a Dmax down. I have a 2015 LML that I'd like to add to your list. You mentioned it had a 48re swap. Is this something you guys could do on a lml?

@FirepunkDiesel

2 жыл бұрын

We can help, we buy the adapter plate and flexplate etc from suncoast

@wickybuilt

2 жыл бұрын

@@FirepunkDiesel curious if you’re familiar with the stand alone required to do this in an LML

@Magucci13

Жыл бұрын

Why would you want to swap an Allison for a 48re?.

@ThanksHero

7 ай бұрын

⁠@@Magucci13shifts faster, stronger.

Dmax powaaaa!!!!!🇺🇲🇺🇲🇺🇲💪💪💪💪

would i be able to bring my 6.7 cummins for dyno tuning?

I need to get my dmax inti you guys asap.

Showed up with I beams, left with S beams.

You should make a video of the after math and teardown

siiiiiiiiiiiiiiiiiiiiiiick dude

Almost 300k miles? That motors just now getting broke in.

Where is the video of the L5P making 1300!!

WoooOO!

HOLY SH!T 😳

Duramax potential

THATS NUTS! 🤣

Got bro so hard in beginning clip 😂

Wow. Minus the parasitic loss through the drivetrain. That things probably 1600-1700 at the crank

Best intro ever haha

You’ll have my truck when it’s back together.

Can you explain how it's possible to make that much power on stock head bolts? Why do so many people have head gasket issues and this guy can make big power.

@134nick

2 жыл бұрын

If he had re torqued the bolts before this run it might have helped it stay together a little longer

@specializ20

2 жыл бұрын

@@134nick I agree but 1400 HP?! That's crazy

@RJisUnknown

2 жыл бұрын

@@specializ20 he only did it those few runs. It 1000% wouldn't survive this for more then a few pulls. Shear luck the thing didn't grenade at this point honestly.

@specializ20

2 жыл бұрын

@@RJisUnknown that is true. But fuel only it dynoed at 900. Even that's amazing to be a stock engine

@V8Lenny

2 жыл бұрын

It's all in the tuning.

Then theres me, stock truck, blown headgaskets.

What year of duramax ?????

Is a built 48 REALLY better than a built allison ? Seems like planetary gears would be better than drums and junk.

@markcherry6513

Жыл бұрын

Built 48 is a “dumb transmission” because it dosent have as many electronics holding it back, so essentially when you want it in 4th gear for example it will go into 4th gear no questions asked and will do it faster than an Allison. That being said, both transmissions have their strengths and weaknesses

Why would you swap to 48re? Is the factory Allison better but a built 48re is better than a build Allison?

@joshuaquilliam2887

8 ай бұрын

48 is a better trans for racing. Less shifting, plus the Allison is a catch and release style transmission so it binds up if you try shifting it too fast. It's great for hauling and daily driving, but for drag racing nothing beats a 48 or 4r100, and the 48 is damn tough once upgraded.

@shannonsisk

8 ай бұрын

@@joshuaquilliam2887 thanks for the reply I did not know this

Yeah on his drive home the crank broke

Stock head bolts?!

@FirepunkDiesel

Жыл бұрын

It had stock, went together with ARP bolts

This a lbz or a lly or a lb7?

@jessebamford8633

Жыл бұрын

lly

Does it still run once cold

@FirepunkDiesel

2 жыл бұрын

Yep, he raced it at UCC in the 7.70 class since he had no cage.

@zzdozer7999

2 жыл бұрын

@@FirepunkDiesel very nice must be a good one

What year/engine on this one? LBZ?

@FirepunkDiesel

2 жыл бұрын

LLY

@builtbyme

2 жыл бұрын

@@FirepunkDiesel hell yeah, people talk shit on the lly. Mine is an lly, it is built tho, but the platform and fuel is lly.

@dangosh3340

Жыл бұрын

@@FirepunkDiesel 05?

@CrossthreadRC

Жыл бұрын

This is why I stand by my lly. Lbz crank would’ve snapped already

This is hard to believe lavon lol

@FirepunkDiesel

2 жыл бұрын

He had a spare engine at home and was fully prepared to send the rods out of the block!

@DSGB2199

2 жыл бұрын

@@FirepunkDiesel obviously!!😂😂😂

is this thing still alive?? shits crazy lol

What Turbo

Slabhaus in the back

Did I hear that right? 48RE swapped? Allison's can't be built to handle power?

@det645

2 жыл бұрын

Commin swap. "Easy to rebuild" and can "handle power"

@TheHarbin22

2 жыл бұрын

Allison's handle that power just fine. They can't shift as fast a 48 and weigh a lot more.

@4wdiesels

2 жыл бұрын

I actually had to research that a bit because I've never seen it. I guess for sled pulling, dyno and drag racing, the 48 is the better choice. If you watch sled pulling videos, lots of Allison trucks going into limp because of sensor issues.

@TheHarbin22

2 жыл бұрын

@@4wdiesels That's not really the case at all. Dyno and sled pulling is fine with a built Allison because the don't require quick shifting. Drag racing is the only time a 48 really outshines an Allison.

@4wdiesels

2 жыл бұрын

@@TheHarbin22 you learn something new everyday!

LB7?

47re swap?!?!

@FirepunkDiesel

Жыл бұрын

Yes

@johndaniels1356

Жыл бұрын

Never even heard of it! Though I may be living under a rock lol

Duramaxs don’t even sound like diesels

@det645

2 жыл бұрын

Sure they do lol

Can you explain how it's possible to make that much power on stock head bolts? Why do so many people have head gasket issues and this guy can make big power.

@FROSTY2588

2 жыл бұрын

It has a big single turbo, if it had a set of small twins it would have already chucked rods.

@builtbyme

2 жыл бұрын

@@FROSTY2588 i think it would have snapped the crank first to be honest, cause the firing order on the lly is all at the front of the crank. Thats why an af cam is worth doing when you add power to them. To change the firing order to be more spread out.

@joshuaquilliam2887

Жыл бұрын

@@builtbyme That's a great theory but still not proven. The only sure fix for Duramax is a billet small journal crank. And no it's not all on the front of the crank lol there is 8 cylinders. All the Duramax trucks have the same firing order, maybe l5p is different idk about that one.

@builtbyme

Жыл бұрын

@joshuaquilliam2887 changing the order (1-5-6-3-4-2-7-8 has become the somewhat standard change) helps disperse forces throughout the entire crankshaft. "With an alternate-firing camshaft, you're basically taking energy and moving it rearward, away from the crank's snout, where it can be absorbed by the flexplate. I have a 1000+hp fully built truck. Im pretty sure i know what and why an af cam helps the crank live. Its not a theory, its been proven. By wagler, socal, and many others. But wait cause i didnt know it was a V8 tho bud. 🤡