I'm running 6s with a 150a flycolor esc with stock motor and it handles it like nothing!! This motor is way under rated!!

Very cool video, after watching your video I started playing around with different batteries for my Atomik Barbwire XL 24, in the stock configuration it would do 31 mph using a Venom 75C 2200mAh 11.1 V LiPo by dropping down to a Venom 25C, 2200 Mah, 11.1 V and went with a little bit smaller prop with less pitch, the boat jumped up to 43.2 mph, speed checked by an on board GPS, I was very happy with the results, we are also running on bigger body of water than you are and that makes a big difference......

@IRONCLADRC

3 жыл бұрын

MN that's awesome 👌 thank you for sharing.

I ordered 3 props, 2 of the 438 's, and one CNC 440, already de-tongued, and somewhat already balanced. ETA. 2 -4 four days, depending on shipping conditions? or 5-20? THEY weren't be very specific. SO, we'll use codes, like "Whenever?" AND you very kind to help out. And your price , is more than reasonable. to tune the props. I plan to Keep one of the 438's , raw and as a spare, and then grind on the CNC, and the FLT. I am really glad, you've had hands on experience with these props, and your working videos are invaluable. THERE is another guy, I work with, "Team Baxter,": and he has gone over the Black Jack motor changes, to additional cooling, and other tweaks. He's run the bigger Leopard Engines in the Black Jack , and he's cruising in the 40's all day along. MY You Tube channel is somewhat cluttered, and crossing three streams. I also do blue screen, 3D art, UNREAL, and some family stuff. If you want to drop in, I'm VUEMASTER 2009.

@IRONCLADRC

2 жыл бұрын

I will definitely check your you tube channel out out bro. Shoot me an email for the specifics on the propss

Big b great job I just watched your video on your water pickup for your motor water cool nice homemade job great I love it keep up the good work love your videos

Project pat “great googly moogly “

Im running that same 4s 30c battery in my rage supercat. I went overkill on the esc (150) but it still has the stock outrunner 3540 2000kv motor. It never shuts down or gets hot but i usually flip it in 2/3 laps. Your videos are awesome!

You might need a bigger pond if it gets much faster.Nice video dude

One last comment sorry you said 3737 that's cool and it all day with your setup done to really check things out

Thanks for the vid. I just got a 24. first boat and have been thinking of mods. I put the zelos 36 1.4 x 1.6 metal prop on. I think it gained some top end, but does a prop spin or burnout sometimes on low end. 5000 3s.

@IRONCLADRC

3 жыл бұрын

It's called cavitation, with high pitch props the top end is good with bad takeoff. With low pitch props better acceleration lower top end. 3 blad props are supposed to be the best of both worlds. I prefer 2 blade props. Personally

It's funny watching you toss the boat into the water lol I place mine in...I just bought it so...

@IRONCLADRC

2 жыл бұрын

I've had my boats flip doing 50plus mph without damage.. so I figure a controlled toss in the water shouldn't hurt it. 🤔 lol

Boating: Do's , and Don'ts. I couldn't figure out, why my Black Jack started sounding like a sick "meat grinder last night. " Apparently , I need to grease the Flex cable more often. I brought the boat , back, before it got too "gnarly. " Even so, I had to order a new flex. AH, the sport , that loves your credit card. so much. IN, other news.... THE new props are heading this way.

@IRONCLADRC

2 жыл бұрын

Yea man I grease my shaft /flex before every run its a ritual. Good luck with the new props

Men how it pays to be patient good job good information

Keep up with good videos learn alot from you I'm looking to buy a boat just don't know which one yet Iv been into rc for years never had boat

@IRONCLADRC

3 жыл бұрын

Mono hulls are a great platform, fun to tune and upgrade (turnfin, trimtabs, water pickups, etc.) Catamarans are fun too... not as many external upgrades needed to tune the boat, as say a mono hull.

@IRONCLADRC

3 жыл бұрын

@@nageltermin725 I've run the m41 & loved that boat for real. I can say the same for the 42, that being said. The 41 has been out longer and has some upgrade parts out. The 42 doesn't have any upgrade parts out (that I know of YET!) other than props. 42 is amazing. Geeezzzzz 😆 if you have a set of 8s batteys I'd say go with the 42 a little more tunning involved with the 42... (my experience anyway). If you want a easier boat out the box I'd go with the 41 cheaper to run aswell. Hard question to answer. Hope that helps.

@daltonboucher8162

3 жыл бұрын

What's your thoughts on the sonicwake an do you have one

I like watching your video's, please keep em going. My 2 cents, for proper prop testing, it is important you reach max rpm. you know your max rpm, motor Kv times volt. I bought a used sanwa M12 transmitter with 2 temp sensors and a rpm sensor. With that setup you can monitor rpm and esc and motor temp, and you can set max temp in transmitter to give alarm when you reach max setting.

@IRONCLADRC

3 жыл бұрын

Roger that, thanks for the tip. "M12" gonna check it out. Thanks

cool down pass... faster than any boat ive ever had 😒🤣😍

@IRONCLADRC

Жыл бұрын

Heres the blackjack 24 now., 73 mph is my all time pb. kzread.info/dash/bejne/gY1opNiEhdmvpc4.html

After the prop she friggin ripped

I BOUGHT ONE TODAY !! Then I put a 90amp Dynamite ESC ! A tongued metal Prop ! 4S 6000 MAH Gens Battery ! Instant 47 MPH ! I also was getting 33mph on stock 30AMP W/ a Spectrum 3S 5000 MAH Battery Tomorrow I will switch up some different props and change the stern up & down to see what happens !!

@IRONCLADRC

2 жыл бұрын

Nice numbers brother. Keep us updated

18:55 this only happens to when my battery is below 3.7 and I’m asking for more , the amp draw makes the voltage sag . The hobbywing 120 is powerful .

Good job, I run a 4500mah 60c 4s in my bj24 with a 120esc stock motor. With no problems maybe you should give it a shot.

@IRONCLADRC

3 жыл бұрын

Wow. That's awesome. 120a on 4s. Tough little motor

always enjoy your content my friend,for me Iike to keep my stuffing tube as straight as possible,any bends in it will cause more friction, losing power and putting more strain on your drivetrain,with batterys higher the mah capacity=run time,higher c = higher performance

@IRONCLADRC

2 жыл бұрын

Thanks. Yep your right 100% right about that. If there's not enough bend there will be excessive cable whip. Thanks for the pointer

@dazspurs9899

2 жыл бұрын

@@IRONCLADRC your welcome mate honestly I learn alot from your content I'm a beginner compared to you

THIS one , sold it for me, I was steering toward the 440, following logic, a little bigger blade, might give it a few more MPH. THE opposite was true. THE 438 allowed for more RPM. THE same was true with Stock Black Jack 29 prop. Gnarly rooster tail, (Great for show), but too much lift. THE Grim Racer , I am running now, looks similar to the 438. And it comes down to Stainless steel, VS. Copper. ? THE the motor on the Black Jack 24, has better timing with certain speed controllers. I had a dynamite 60 Amp, and had seen no significant improvement in over all performance. THE current draw increases dramatically , when you bust it out of the hole. AND depending on the C Rating, (Turbo Charger) , 25 to 100> Go from a Volkswagen , to a wicked TOP Fuel dragster, or Quad coupled turbo on an a Porsche, or 6 S, Lamborghini I ) am running 5200 MA. / 50 C , and that's a good combo. I think the MA rating , is your run time. I had a 7600 75 C , and it had, wicked acceleration , but was so heavy, it lists the boat, and actually ran the boat slower. Your 2200 4 S , test, proved ...... the lighter the boat, the faster, and more stable it was . THE Grim racer, lays the boat out on a rail. BUT , the 438, would be nice for a little extended. top .( BUT I haven't figured out, how to get it prepped, tuned.. Do you have source, you go to the get your props prepared? I could use some help, on that end? THEN , you pulled out Twin 4000 Leopard motors? ..... YOU will have what is equivalent to WARP Drive. WE kids, we think too much. I saw a guy run a Rigger at 117 MPH, on 12 S . 500 AMP controller. USING the twin motor configuration.

@IRONCLADRC

2 жыл бұрын

I basically sharpen and balance all of my own props. I use an dubro balancer

@marknickells6097

2 жыл бұрын

IS this a service , I could pay you for? It would be worth my time. I am going back and forth, and playing "Email tag , with Off Shore Electronics." , and it's like a time warp,warp in SLO -MO. ASK a question, and leads to another question. AND , right now waiting for the Password reset.

@IRONCLADRC

2 жыл бұрын

I've never sharpened & Balanced props for others, if you want to send the prop/props to me, I'd be glad to balance sharpen & polish them for you. I wouldn't know what to charge per prop. Maybe 20bucks each because it is rather tedious. If you make the prop order I can give you my address and have them shipped to me, then I can ship the finished prop to you, pay pal me when I give you the tracking number..

@IRONCLADRC

2 жыл бұрын

My email address is ironcladedout@gmail.com Email me because I don't get every notification from KZread

Cool video. I've got this boat but I'm having a battery issue. It's a dynamite brand prophet sport mini charger and 50c 4000mah 2s 7.4v batteries. 1 battery expanded on me and is toast. The other doesn't want to hold a charge. I'm sure I did something wrong being a noob to all this- but is this gear ok or did my local hobby shop sell me crap? And can you recommend a better replacement? Thanks for any info.

You'll probably never see these commenting as I'm watching it your video is never too long never

@IRONCLADRC

3 жыл бұрын

👊🤜 thanks

I might have missed it, but what is the Allup weight of the blackjack. cheers.

Hey enjoying ur videos. Had 2 questions for you. What kind of tape should one use of going over 45-50? Sec question where did u buy the gauge for speed?

@IRONCLADRC

2 жыл бұрын

Tape. www.offshoreelectrics.com/proddetail.php?prod=fab-tape-1. GPS bought @ local hobby shop. Dynimite GPS amain stocks them.

I am making the aluminum rigger boat first then the snub jet boat, your gonna get 2

@IRONCLADRC

11 ай бұрын

Heck yea ironclad those bad boys Out!

I’m buying the blackjack 24 I’m new to the hobby ,what battery should I order I think it’s 2 s I’m leaving it stock for now thanks for any information 🇨🇦🇨🇦

@IRONCLADRC

3 жыл бұрын

I'd go with ovonic 5000mah 50c 2s pack. Ovonic battery's are cheap and reliable. 3s iid go with 3200mah 3s 50 or 100c

@marknickells6097

2 жыл бұрын

I use the Commonsense , Lectron Pro 5200 50 C, 3 S . They run real well in that boat. (I'm on my 4th. season) with the Black Jack 24. and the batteries have given me little trouble, unless over charged, or run too long. Get a cheap low voltage alarm, and tack it it on the balance plug, and the battery will start to beep , if it get's too low. Let me me know , if any questions , regarding the boat.

Question that cut off ! My Impulse 32 Pro Boat Cut off the other day, but went back on was that a over load it was 5000 MAH 100C Spectrum battery RUNNING 6S 2 Batteries ? I'm seariously considering buying this Boat your running just to tweak and Modify what Motor would you use ?

@IRONCLADRC

2 жыл бұрын

It Could be Low voltage cut off it also could be Hi temp cut Or The prop you're running could have been too big, had a power cut due to the overload on the electronics from lg prop.

What's up man thinking about putting a 90 AMP Dynamite Marine Esc in my blackjack 24 stock motor running 4s 5000 mah 30c think the motor will hold up 🏁 can I see my question thanks for making these KZread videos 🏁🏁🏁

@IRONCLADRC

2 жыл бұрын

Possibly? the motor is rated for 3s, ive run 4s 2200 30c and 70a speed control with out issue. I wouldn't throw a big 4s pack on it. Watch Temps, and be prepared for motor failure if you push it to hard.

Hi man. About shark esc What program card did you use? In case you used the remote control, which card do you recommend? Thanks to exist

@IRONCLADRC

2 жыл бұрын

www.ebay.com/itm/Surpass-Hobby-Program-Card-for-RC-Airplane-Boat-ZTW-Shark-Beetle-Brushless-ESC-/174857135994?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0.

Lol I guess I shouldn’t of been pulling my throttle 0%-100% instantly back to back on a 6s 6000mah 80c lipo on my stock pursuit motor 😂

@IRONCLADRC

3 жыл бұрын

Lol yea I learned the hard way too. Your not alone, friend. That's what happened to the deltaforce 35, About a year ago.. the bad thing is I knew better..lol

What’s the best prop for this boat when it’s stock, I think my comment got deleted

@IRONCLADRC

2 жыл бұрын

Tfl 438 is my go to prop stock & upgraded

@codyhicks3870

2 жыл бұрын

Will I get better speed and do I need a 3/16th shaft or will the stock shaft work

How long is this boat?

@IRONCLADRC

2 жыл бұрын

24inches

Since I found IronClad R/C, I don’t watch anything else. 👍🏼

I'm just now watching your video for the first time I am so confused and it looked like you were getting confused yourself sorry I was a long time racer of RC off-road trucks and buggies racing your mah.. rating is just how long your run is going to last 5,000 maybe 8 to 10 minutes 1500 maybe 5 to 6 minutes the C rating.. is what you're looking at jump speed fast speed when the battery is hot just put it in the boat warm it up for 100 ft and then blast it that's what counts... You mentioned a difference in speed with the ESC I didn't understand that either you could have a 500 amp ESC... With the 5000 ma 80c battery running 3s and get 30...31 mph.. nothing is really going to change until you put a 4S or 5S battery in voltage and amperage... You had lots of play time fun to watch it go back and forth I don't know if your video is on your head cam you are a little off on that at first but it looked like he got better

@IRONCLADRC

3 жыл бұрын

Kinda tinkering with weight and power, different mah/ c size in the boat high power- heavy battery's sometimes will not give you higher top speed because of the extra weight in the boat. Sometimes you can get better top speed with lower light battery's (low mah/c lite battery) than with big HIGH POWER heavy BATTERY'... Yea I hit 41 with a 4s 2200 30c. . I couldn't put a 5000 50c 4s on this motor because it would over exceed the max recommended rpm. (motor is rated for 3s max, did math so I didn't exceed max rpm) In previous video I hit 34 ( ithink) with 4000 3c (lite battery) and only got 30 with a 5000 100c (heavy batt). Not every thing is text book. Text book is in a perfect world perfect conditions.. maybe this clears up a few misconceptions or maybe miss communication. Thanks for watching.