Help us find Toothless Ruth a forever home in the Atlanta area! angelsrescue.org/pets/?id=60525036

@civicekhatch9

11 ай бұрын

Ls7 long block

Gave a like just for pops and the pup

Love Jeff’s subtle approach to guidance and taking over when appropriate. Solo work in the shop is great, but teamwork in the shop makes for great memories. Thanks for sharing.

You won the lottery on father in laws. A good mechanic and a sense of humor. Learn what you can while you can.

This is a great father in law bonding moment. 👍 Props to Jeff for helping you get better at your hobby😊

@JoshVanVeld

Жыл бұрын

You hit the nail on the head! It might not be obvious to the viewer, but the extra effort required to film all this stuff calls for an additional layer of commitment and Jeff handled it like a pro. So I guess you could say he helped with the car hobby AND the KZread hobby.

@Steverz32

Жыл бұрын

@@JoshVanVeld anything you can do with family, builds better relationships and trust me, your wife heart smiles when you and her father are bonding 😊 It also lets her father knows she married a good man as well☺️

It’s 100% tue that away to a man’s heart is through his stomach. Can’t vouch for this enough.

My God, that Chicago accent. Felt like I was watching a mafia movie lol.

@JoshVanVeld

Жыл бұрын

Haha or the SNL "Da Bears" sketch.

Pops for the win. You get that experience to work with and learn from. As a bonus you get that time together and that’s priceless

@JoshVanVeld

Жыл бұрын

💯💯💯

Everybody needs a shop "goat". What you were trying to say is Jeff is the Greatest Of All Time = GOAT

“You just pitch those down the alley” LOL!!! Love it!

@JoshVanVeld

Жыл бұрын

He then launched into a whole story about a guy who found a tool he pitched down the alley and that led to him putting a clutch in the guy's '52 Chevy. Epic!

This makes you appreciate old school cars.

@ssoffshore5111

Жыл бұрын

And while I own both, there's no substitute for the more modern-day all around performance. It's night and day!

@shannonshepard5047

Жыл бұрын

Oh I’ve modernized my old school to the hilt. But what your going through is a lot. Good luck.

Who doesn’t love Garage Goats?

As I said in the earlier videos, "You got this!". And I have to say that the organization and cleanliness puts you way ahead of many low end pros pros that have dirty, cluttered shops. The elite shops are clean and very tidy. So great job there and no you don't have a problem. Keep up the great work.

Okay, you got me at cowbell! 🤣 So awesome of Jeff for jumping in to give a helping hand!!! And no, you're not the first guy ever to label the parts, lol!

Nice work. Gotta love the old school guys and especially the south siders. And yeah I cried a little so what

You should keep Ruth because she trusts you now. You guys are the first ones to show her love and to send her to someone else’s home will break her heart.

@JoshVanVeld

Жыл бұрын

Believe me, we've talked about it! We've got three dogs (two of them "foster fails" where we adopted dogs that we fostered) and three kids. Ruth deserves a family where she can be the center of attention and I don't think she'll have too much trouble bonding with a new family. We also want to be able to foster more dogs in the future and that wouldn't be possible if we keep her.

It's me I'm part of the 1.6% :P Honestly I have no clue how I ended up being into DIY because my dad was never much of a DIYer and wasn't much of a car guy some days I do wish I had a bit more guidance when I'm tackling my projects. But I love how relatable your projects are and your super down to earth demeanor you're definitely one of my favorite automotive youtubers right now :)

@JoshVanVeld

Жыл бұрын

Thank you so much! I was hoping that line would get some female viewers to comment and it worked! I also find myself looking back and wishing I'd had a hobby mentor so I could have gotten an earlier start with automotive projects but in the end I'm grateful that the internet is there to help us connect with like-minded people when we discover things we're passionate about. Focusing this channel on my projects has helped me to confront the indecision paralysis state that I often find myself in when I'm feeling overwhelmed / underprepared. It's all about taking one more step to find out where it leads.

@almostlastplace

Жыл бұрын

@@JoshVanVeld The internet has definitely been an amazing help for sure I started really getting into cars only a few years ago and barely knew how to change my own oil without help from my partner and now I've been taking on more and more advanced projects like rebuilding my transmission and I'm getting ready to swap the cam in my own car super soon. Making videos seems so intimidating tbh but it's really interesting how making videos is a part of what inspires you to proceed with your projects.

@JoshVanVeld

Жыл бұрын

@@almostlastplace With videos you need to accept that it's a hobby in and of itself, so you're applying one hobby to another. Hobby inception! It's a lot of fun when you get the hang of it because it lets you share stories in a way that wasn't at all possible when I was a kid.

Man, you got it whipped now! You’ll be so glad you did it yourself. There’s no rush like the first time you hit the key on a new build!

@JoshVanVeld

Жыл бұрын

Very much looking forward to that feeling.

You’re right, I am crying 😢 my dad passed exactly a year ago. Somehow that little segment brought some good memories in my dark mind

@JoshVanVeld

Жыл бұрын

I'm sorry for your loss.

Northsider here. That's one helluva Chicago accent Jeff has. Right out of Central Casting.

@JoshVanVeld

Жыл бұрын

Nicole and I were remarking on that when we were walking the dogs this morning. You should hear him tell one of his stories about the old days in the neighborhood.

@nvanveld81

Жыл бұрын

Haha! I love it! We moved out of the city when I was 12 people say I have an accent but definitely not like his 😂. My dad grew up on the northwest side of the city. His accent is home ❤

I will also definitely rebuild the tq tube while u at it. 2 new couplers 3 bearings and the metal piece infront is called a slinger.

GOAT = greatest of all time…no? Lol. Yup…you are hooked: Engine hoist and stand! Gr8 video

So let me get this straight. Your wife is a chef, rescues dogs, and lets you buy expensive tools you’ll only use once? JACKPOT DUDE

@JoshVanVeld

Жыл бұрын

Careful, if she reads these comments she's going to start asking questions about how much the tools cost.

@JoshWalshMusic

Жыл бұрын

@@JoshVanVeld Nicole - I’ll spoil it for you. A “best” engine mount cost about $18 + tax

@JoshVanVeld

Жыл бұрын

@@JoshWalshMusic 🤜🤛

I miss living in GA out your way. Such a nice place to live.

@JoshVanVeld

Жыл бұрын

We've been here for 10 years now and nowhere near sick of it yet. Where were you?

I just found this series and I’m hooked! So invested now, about to binge watch to see Goldie live again. Had a c6z for a couple years… Thinking of selling my R35 and get back in one. But the dropped valves are my main hesitation. Seeing this series makes a simple head swap seem like a walk in the park. Thank you for the great content!

OCD IS PERFECTLY GREAT TO HAVE!!! I had a roommate who was ocd. Man I miss that guy!!! My house was NEVER A MESS

@JoshVanVeld

Жыл бұрын

That's the spirit! I don't want to minimize the struggles people go through with a disorder like that but it's certainly interesting to see how people fall along the spectrum. Nicole watched that segment of the video and remarked that she wished I felt compelled to keep the other rooms in the house similarly neat and tidy.

I can feel Jeff's soreness the next day! Cudos for his hard work... keeps the rest of us old guys going...

I love this channel! All around just wholesome, informative, relatable, and fun!

What a great video! I can’t get enough of your mix of great car content, subtle views into the emotions you feel with everything you do, and a big dose of humor. Wherever you are headed, I’m coming along for the ride. Thanks Josh!!!!’

@JoshVanVeld

Жыл бұрын

Thanks for that! I've been putting a lot of effort into trying to find the blend of those elements and I feel like I'm zeroing in on it. The feedback / encouragement helps a lot.

I'm so glad your channel exists for DIY kids like me, my C6Z is my dream car, and I'm so happy you exist because I'm in the process of the preparation/excel sheet on budgeting and pricing on my LS7 bottom end.

@JoshVanVeld

Жыл бұрын

Thanks that's great to hear. C6Z is such an awesome car, I feel like if the LS7 had a reputation for being bullet-proof prices would be 50% higher than they are now.

@AarenPho

Жыл бұрын

@@JoshVanVeldare you gonna prep for Gridlife next year? ☺️

@JoshVanVeld

Жыл бұрын

@@AarenPho I would love to do time attack competition with Goldie, but I didn't plan the build with a set of rules in mind so it might not make sense. I'm also not sure how I feel about doing any sort of competition driving in a car without a cage and fire suppression.

Great content! Jeff is a rockstar! Looking forward to seeing where this build goes! Keep at it man

@JoshVanVeld

Жыл бұрын

Jeff is an awesome dude, I lucked out in the father-in-law department. Thanks man!

Love that you have Jeff on here for this!

@JoshVanVeld

Жыл бұрын

Me too! I like to think one of your comments helped make it happen. Absolutely removed the stress from what would have otherwise been a difficult couple of days in the garage.

@michaelschultz1104

Жыл бұрын

@@JoshVanVeld well I’m glad my input helped out! Any chance you can have help in the garage even if it’s just someone to talk to helps with the stress levels. Also really helps if that person is experienced 😉

@JoshVanVeld

Жыл бұрын

@@michaelschultz1104 For sure. Fun + learning is a killer combo.

One more thing about the tools- they take a lot of room and keep them. I'm the guy who rebuilt the Porsche Carrera 3.2 engine last year and kept all of the tools I used. You will run your engine hard and if anything goes wrong you'll be 100% in control of your destiny. It's better that way and the storage is worth it if you're all in on the car.

@JoshVanVeld

Жыл бұрын

Kudos on rebuilding a Porsche engine! LS feels like a nice platform to start with because it's so simple in terms of design and has so much aftermarket support. If I ever feel like I'm even 75% in control of my own destiny I'll consider that a huge win. Appreciate the perspective!

Thanks Jeff!

Thanks for sharing toothless Ruth I love when you get unexpected dog content. Love seeing when you post new videos and am living vicariously through your engine replacement. I think you should go ls7 again and beef it up for track use.

Another great video, it is really relaxing watching and listening to your narration. Look forward to your next video.

@JoshVanVeld

Жыл бұрын

That's a great compliment to receive. Thank you.

This is my favorite KZread channel. Great content brother. You’ve got this. With what I’m guessing about future power levels, it would be a good idea to check the condition of the torque tube as well. Now to patiently wait for your next one…

@JoshVanVeld

Жыл бұрын

Thanks Jeff, that really means a lot to me. I'm going to try to figure out a way to pick up the pace but the reality is the editing process for the videos is a huge time sink and slows down my progress on the project. Hopefully I'll get faster as I dial it in. Good point about the torque tube, I've heard there are wear items... guibos? And while the motor is out would be the best time to address any of that stuff. I hate "while I'm in there" stuff because it never ends! 😂

@JeffWoods-kl3pe

Жыл бұрын

@@JoshVanVeld you could put out 2 a week and I’d still be anxious for more, haha. My advice on that is to keep it at a comfortable pace. We don’t want you getting burned out now. Lol Yes the guibos/couplers and the bearings should be inspected at least. Probably a good idea to just replace them at this point. The old snowball effect…

Always enjoy your videos. Special thanks to pops for all the help. Maybe buying a GT3 would have been a better idea. I'm coming to your house for lunch. Yum.

@JoshVanVeld

Жыл бұрын

GT3 might be a better idea (assuming you can afford it, they're usually at least 3X as much as a nice C6Z), but so far I am really enjoying everything I'm learning with this project. I feel like a GT3 doesn't lend itself as well to DIY wrenching. Not nearly as many how-to resources on the internet.

Use a long stud 2 nuts and 2 washer on the passenger side craddle mount for the steering rack. You need to bend those mounts a bit open. Dont bend it too much otherwise u will b looking for another craddle. Magnesium is soft af. That way when u put the rack back in, you wont be struggling too much. The ac compressor u can remove the 4 bolts from he passenger side wheel wel. Lower the 4 craddle bolts 21mm

Man, who are you kidding? Your garage is so clean I would give food a 10 second rule.

@JoshVanVeld

Жыл бұрын

Well yeah, but isn't everybody's garage like that? 😅

Great learning video even at seventy one I probably won’t get a chance to do this again I enjoyed the video

@JoshVanVeld

Жыл бұрын

Thank you sir, glad you enjoyed it! My goal is to never stop learning.

I have a 2008 yellow Z06. I so much enjoy watching and learning from your channel. I am also a hobbyist mechanic and raced SCCA for many years. I am getting the head fix and porting from West Coast Heads, American racing headers, Haltech exhaust, and a tune. I am focusing mostly on reliability without adding a little bit of power. Thanks again

@JoshVanVeld

Жыл бұрын

Sounds like a great plan. Thanks for the comment! How did you choose the exhaust?

this is gonna be one hell of a build series, your father in law it top notch! ive seen a lot of people pull there motors on vettes from either the diver/passenger side of the car. maybe its easier idk, different strokes for different folks.

I had to pause my Saturday morning Honey-Do list to watch your video. Love your channel. There's something very calming about your videos. Before I bought my C5 project car, I had my heart set on LS swapping a BMW M Roadster. Found one with a blown motor for pennies, but timing wasn't right and let it slip through my fingers. Maybe that's an idea for the next project for your M! Keep up the great content, I'm excited to see the direction you take with the Z!

@JoshVanVeld

Жыл бұрын

I will admit that the thought has occurred to me that an M Coupe with an LS7 would be absolutely freaking killer. Feels way too far out of my skillset right now, but maybe down the road when I've got more experience under my belt. Glad you're enjoying the videos, calming vibe has emerged as part of the recipe that I'm putting together thanks to this kind of feedback.

Hey man, sitting here in my garage looking at my half disassembled LS7 that I am pulling due to engine issues. Truly your videos are really good, informational, fun to watch, and I relate to them. LS7 rebuilds are really expensive, even the cheap ones ($12k+). Hang in there, take your time, take care of what you need to financially. At the end of the day the car is a material item, don't sacrifice relationships or too much money to see it live. Every person I have seen rebuild the LS7 or engine swap for another LS7 just sees them blow in another 20-50k miles, take that into consideration. I am looking at throwing in a 5.3 L truck motor into mine because everything else would cost $8k+ in parts and labor, then over the next few years rebuilding the LS7 as I have money. Rather have a car thats reliable and drives than one that doesn't do either. I keep trying to find proof that there is such a thing as a built LS7 under 600 RWHP that will last 100k+ miles, still haven't found any hint of that..

Excellent video! Great to watch you go through the motions. And your father in law is a cool guy too. From one OCD-like person to another, I think I prefer that over being disorganized and a mess! 😜

@JoshVanVeld

Жыл бұрын

Thanks buddy! Been thinking about you I'll give you a call shortly.

Your videos are amazing and I always look forward to a new episode! Thanks for these and hope Ruth finds a great home!!!!

Hi Josh. Its great you have your father in law to help. He will help you build your confidence in working thru the project. Some points worth noting. You and your father in law can decide on cleaning the oil lines, oil cooler and intake manifold vs replacement. Once the engine is out, open it up and check the inside of the oil pump. If there is scoring inside the the pump (rotors) then metal did circulate in the oiling system. Also, look at the scavenging pump oil pickup screen in the sump. If there is metal there then that too is an indicator metal circulated in the oiling circuit and thus proceed accordingly. The oil tank will need to be cleaned and it can be disassembled for cleaning which will need to be done. Good on the engine hoisting rig. There is the challenge in getting the replacement engine assembly installed back onto the splined input shaft. Get the steel alignment shaft from Summit or Tic Performance etc. These will get the friction disc and pilot bearing aligned perfectly when you reassemble the clutch back on the engine so the input shaft will pass very smoothly. The car wasn't really designed to have the engine removed this way. The whole drivetrain is to be removed as a unit and then broken down. Pulling the engine from the top though is less work but the clutch shaft to engine mating needs to be done precisely. They make an engine hoisting plate that has a lead screw so the pickup to the hoist can be set such that the inclination of the engine can be set very precisely. With the rig you have, you can try using a winch strap and connect either to the back or front of the engine and change that tilt angle a needed. Need to get the crankshaft centerline and the input shaft centerline exactly the same for the input shaft to slip into the clutch disk spline. This is the hardest part of re-installing the engine and needs to be planned for when reinstalling the engine. Replace the clutch servo in the bell housing. The stock GM service part is fine. Get the Katech clutch bleeder kit and install that while everything is apart. Way easier than trying to install with the drivetrain assembled and a very necessary as these hydraulic clutches in these cars gets clutch dust in the servo and thus in the fluid. Clutch action then gets bad and not a good situation for a track car. The Katech clutch bleeder makes maintaining the clutch fluid much much easier and the clutch action will be better. The clutch master cylinder was updated on these cars. Get the latest part number master cylinder (pedal side of clutch) from GM and replace that while the engine is out. This can make the shifts cleaner and faster and fixed some potential malfunctioning issues as per GM service bulletin. For the clutch assembly itself, use the GM stock Z06/ZR1 clutch from ZUK (ZUK makes it for GM). Not expensive and has the right balance of torque capacity and pedal pressure for a track car. Chris Sullivan on this KZread Corvette show does have an episode where he re-installs the LS7 in the car so that can be a help tp you for the tricky parts of the process. Anxious for what your decision will be on the engine build. Hope all this helps.

@JoshVanVeld

Жыл бұрын

Another treasure trove of info, thank you for taking the time to post this!

great channel, look forward to your future video. And good luck to your build.

You probably should contact Lamar Walden for your engine build they do amazing work

The more I watch, the more I am struck that with your positive attitude you have an opportunity to do something here that would be very rewarding and get you to your goal for a budget you can justify IMO. I've built a few engines over the years but I am far from an expert or professional. Get yourself a book on building LS engines- especially one on building performance LS engines and read it through. You have the tools now, the ambition, and the ability to to this and you can build an engine for a fraction of what a crate or special built engine will cost. And you will know exactly what went into your engine for parts. If it were me, I would get a Dart block or some other strong aftermarket block to start with, especially if it is compatible with your existing rotating assembly. Have your existing rotating assembly inspected by a good shop , along with your head parts, valve train, and cam/cam bearings for damage from metal shavings and other debris from the engine breakage. Have the heads repaired, get new bearings , rings, and replace the damaged piston and have the block machined to accept all the existing parts and new parts. If you're not feeling up to it, most good automotive machine shops will assemble the short block for you for a relatively nominal fee. If you want to do it yourself, follow the instructions in the "Build a Performance LS Engine" book, and have a buddy with some experience standing by while you do the more important parts, like checking bearing clearances with Plasti Gage or how to gap piston rings... Add an upgraded cam if you are looking for more power, a different Air Flow meter and intake, etc... to suit your needs, etc... for barely more than putting it back together stock, and save some money. To Rev to 8K, you will need better lifters. You can do this... check out "that engine guy" KZread videos on his recommendations what to use to build a high revving engine that will perform...

@JoshVanVeld

Жыл бұрын

Thanks for the vote of confidence, Bob! Appreciate the advice.

Huge fan of the channel, please keep up the amazing work.

@JoshVanVeld

Жыл бұрын

Thanks Kevin!

Congrats on your 100th video!

@JoshVanVeld

11 ай бұрын

Thanks for noticing man! 🤜🤛

Dogs, cars and good food. 3 of the best things in life right there. I’d also recommend changing out the harmonic balancer while you have it apart. I’m sure you know as a corvette guy that they are a weak point with the ls platforms and you have to pull the rack to change them on a c6 anyway lol. Mine started to wobble just under 30k miles, replaced it with a Summit balancer and now at 46k with no issues. Depending on the power output when it’s rebuilt maybe go with the ATI balancer but it’s a lot more expensive lol.

@JoshVanVeld

Жыл бұрын

Yes sir, thanks for the tip! I had the one wobble right off of my C5Z (the steering rack prevented it from actually falling off the motor), so I have a bit of experience in that regard.

@dailydriven991

Жыл бұрын

@@JoshVanVeld yikes! Mine started wobbling after my first autocross. I bought it at 23k and focused on maintenance for the first year but autox pointed me toward bulletproofing before mods. Can’t wait to get it back out and push it more. Awesome watching yours come along!

Very good job at you and your father! A fan from France 🇫🇷👍

@JoshVanVeld

Жыл бұрын

Thank you! I've been watching the Tour de France this year... what a beautiful country!

So happy this video is getting this amount a views. It sucked watching the car go down. Hopefully the views keep going up, and the channel grows bro 👍🏾

@JoshVanVeld

Жыл бұрын

Truly appreciate this comment. Thank you.

Content is amazing as always.

Roothy is awesome!

Hoping you find your parts soon to keep the project going! The community is sending you positive vibes!

Another great video! Man, pulling a vette engine is challenging! Like you said, it's all packed in there by GM. Imagine the nightmare of dropping an engine from something like a Cayman. The FIL was a cool dude. Experience is a wonderful thing aint it.. Oh and, the dad comments didn't help man!

@JoshVanVeld

Жыл бұрын

Thanks buddy! I want to own a Cayman at some point but I wonder if I should make a rule that I won't buy a car if I can't get the motor out using my QuickJacks 😂

Your best video yet

So great. Truly. This so entertaining.. I mean as much as I’m here for the build and the final product it’s, its.. more. It’s more tangible, more real life. Thank you for inviting us all along for the journey. Really quick- Do we all (Chicagolanders) actually sound like… like that? Haha! I don’t normally “hear” it in daily life but Jeff’s regional accent was awesomely chicaaaago! 👍🏼

@nvanveld81

Жыл бұрын

Ha! This is so funny! I never noticed how strong my dad’s accent was until I got older. And even more so now that josh and I moved out of state. When I hear people with the accent it feels like home again ❤.

@JoshVanVeld

Жыл бұрын

Trying to include the right amount of my life and my thought process to help the project make sense has been the big battle with learning how to make videos and I feel like I'm getting closer. Thanks for sharing the feedback! And yes, you definitely sound exactly like Jeff 😂

Regarding the oil cooler, the other option is to add a thermostat. You’ll get up to temp faster but still have the benefits of the oil cooler when you need it. I’m a month into having the Gspeed kit on my car and it is phenomenal.

@JoshVanVeld

Жыл бұрын

Oh cool, I hadn't heard about that. Seems right up my alley, thanks for the tip!

@robyna8995

Жыл бұрын

@@JoshVanVeld improved racing also makes just the thermostat and other bits if the Gspeed kit is too much scope creep.

Josh, great video and my condolences on your dad. This is a big project - excited to see the next steps!

@JoshVanVeld

Жыл бұрын

Thank you!

@ssoffshore5111

Жыл бұрын

@@JoshVanVeld ❤❤❤

Wow. Thanks for the video. ❤❤

Great work, you guys make a good team! Really enjoyed the video.

I like how you operate. Keep up the good work

An oil cooler thermostat from improved racing would allow your oil to get up to temp before cycling through the oil cooler. I have one on my car

Awsome work 👏!!!

I have a 07 C6z since new and rarely driven. Thanks for your videos, as I want to fix mine before hurting her.

@JoshVanVeld

Жыл бұрын

Wow, since new! How cool. At very least you might want to have the valves “wobble” tested to see if they’re still in spec.

Nice Job Guys, And by the way being clean and organized is Not a sickness or issue, The fact is it makes big jobs like this doable in a home garage. Good Luck with the new motor install. ! Love from Norther New Jersey !

@JoshVanVeld

Жыл бұрын

Thanks man, appreciate the support! I couldn't give up my clean garage habit even if I wanted to 😂

Great video. And a lesson to any LS7 owner. Even if you buy one and someone says the heads were done GET THEM DONE YOURSELF the 4 or 5k max will pay you over and over look at the work and labor and cost if you risk it.

@homer23422000

10 ай бұрын

You mostly go by if the seller has receipts of certain repair or maintenance jobs being done. It's all about the receipts.

@charliejonesjr5518

10 ай бұрын

You aren't a part of the process you're in the aftermath. If you don't KNOW the shop that did it its a gamble.

Great stuff Josh. When you finally get the car back together you'll know the thing inside and out. This video will also be a great reference if my LS7 ever quits on me.

@JoshVanVeld

Жыл бұрын

Don't talk like that Zach, your LS7 will live forever! Appreciate it dude :)

Love it. Right on Josh. Keep the content coming bud.

Man so much respect. I feel like I have about your skills in the garage and I would never be confident enough to do this project. Fabulous video all around. Your channel’s success is well earned.

Not sure if you know or someone else commented. You need to clean the lines and tank. Small metal got all thru the dry sump and oil coolers.

This is some top quality content sir! It's been great watching every video.

@JoshVanVeld

Жыл бұрын

Thanks man, much appreciated!

When dad pulls out the yammer! 👜

@JoshVanVeld

Жыл бұрын

🤣]

You've got some serious patience dude. I'm envious of your dedication. BTW while you have the bumper cover off, it's a good time to get aftermarket headlights. I got the Morimoto C7 style headlights and not only do they modernize the hell of my C6Z, they light up the road better than any headlight in any car I've ever head, including my actual C7Z

@JoshVanVeld

Жыл бұрын

Hey Josh! Good point about the headlights. I definitely don’t love the body color look of the stock ones but I’m not convinced I want a C7-style look. Maybe stock ones in a graphite color to match the wheels would be an improvement…

Josh, I must say, your video was fantastic! It really struck a chord with me. Seeing your well-organized garage has inspired me to finally tackle mine. It's been over a year since I moved into my new home, and I still haven't gotten around to organizing it properly. However, I did manage to make a smart decision right after closing on the house-I got the floors coated with epoxy. It made a huge difference. I have a three-car garage, and one of those spots is occupied by my '09 Z06. Now, speaking of cars, my biggest concern lately has been the valve drop. I had the heads redone when the car had 13,000 miles on it, so I could focus on other upgrades. Currently, it's at around 15,000 miles, and while I've considered taking it to the track, I haven't done so yet. Your work in the video is truly inspiring, not just in terms of tackling DIY projects but also in reminding us to seek help when needed and to never stop learning. Knowledge is something no one can take away from you. Anyway, getting back to the point, I'm curious about your plans for the motor. My gut feeling is that sticking with the LS7 and building it to be bulletproof is the way to go. And please, keep it naturally aspirated. I don't want to ramble on too much, but I do need to hang my quick jacks and tidy up my garage. Thanks again for the great video!

@JoshVanVeld

Жыл бұрын

The floor is absolutely the critical component and the place to start. I might do a standalone video about the garage at some point because it was so hard to convince myself to pull the trigger on it. And I realize not everybody is in a position to spend thousands on floor and cabinets, but those are really the two key ingredients and suddenly you've got a space you're proud of that you want to keep clean. Glad you enjoyed the video and glad I could provide some inspiration!

@petelanzone484

Жыл бұрын

@@JoshVanVeld Oh it sure is.. Makes cleaning oil spills and so forth a breeze. And as for pricing of it. It is costly but well worth it if you are a auto DIY'er

Way to go dude, I just got done doing the same about a month ago in my garage at home on Jack stands, definitely fun 😅 after being spoiled at work with lifts. You’re doing great.

@JoshVanVeld

Жыл бұрын

Appreciate it brother!

These videos are great, it's nice having a guest too

@JoshVanVeld

Жыл бұрын

Thanks! It's got me thinking about future guest appearances, if only to keep me getting stressed out in the garage :)

Wow great video. Jeff said to you exactly what my dad said to me when I tore the top half of my engine apart over the last 2 weeks. Whenever I got stuck on something he had a special tool or a trick to solve it almost immediately :) I am really looking forward to seeing what you do with your car from here out.

Another good video. It’s great you are willing to share your experiences honestly, can be very helpful to your viewers. You are the 2nd KZreadr that I have watched to show top removal of an engine from a C6. I haven’t tried my self but I think I would go with the dropping of the front and rear cradles to remove, but that is because I have a lift in my garage. Not sure which way is “easier” but it probably is very dependent on if you have a lift or not. Good job. I look forward to seeing what you do for your replacement engine build.

Love how you detail this video so much. I have a 2011 L99 camaro with DOD delete cammed and i had a lifter fail (Delphi oem ls7 lifters suck). I wish i had the time and ability to do what you are! KEep it up!

@JoshVanVeld

Жыл бұрын

Thanks man! Had a friend with a stock C6Z (the one that made me want to own one myself) with 85K miles and he lost the engine to a lifter failure.

On the F150, keep an eye on the soft brake line, just had one of those fail and create what appeared to be a stuck caliper. I’d never seen one fail like that. Exterior was fine. Interior was collapsing apparently. So if the issue returns slap some soft lines on it.

@JoshVanVeld

Жыл бұрын

Thanks I'll make sure Jeff sees the comment.

If you’re looking at other engines besides the factory motor, the M156 engine is a monster engine, bulletproof, and just slightly less displacement at 6.2L so will still sound amazing.

@JoshVanVeld

Жыл бұрын

How cool would that be?? I assume somebody has done it by now, but unless there's a kit out there it's probably way above my skill level to pull off a swap that requires fabrication and such.

What a great bonding experience for you both! Im glad you kept the mistakes made while working on the car. I can relate in the many mistakes I've made learning 😂. I still make mistakes while they're frustrating at the time after its a valuable learning experience.

@JoshVanVeld

Жыл бұрын

True! I heard an interview with Jay Z once where he said something like, "I've never learned much from my successes." The funny thing about editing video of yourself making mistakes is that you see yourself make them 10 or 20 times and it helps reinforce the lesson. I'd never be able to trick anybody into thinking I'm an expert, so might as well show the ups and downs of the learning experience :)

@rcunknown5303

Жыл бұрын

@JoshVanVeld That's a very true quote. You learn the most through failure. Most will never understand the amount of time it takes to edit videos. My videos are not nearly as long as yours but I review over an hour of videos narrowing them down then editing those, so I appreciate the work you put in. I need to start making videos again. I miss the memories with friends. Your videos have good flow to them! I look forward to the engine choice announcement 🙂. I'm hoping for poor man's Zr1 but totally understand an NA ls7 too.

My first rebuild was an inline 4 and I've got to say that I actually enjoyed the process, I had to do it like 4 times, but I was worth it and I actually can't wait to do it again...

"I don't have OCD" 10 seconds later "Here's my printed out list"

@JoshVanVeld

Жыл бұрын

😂😂

If you have a Costco in your area, go buy some of the wire shelving- the 48 x 18 x 72" shelving is rated for 1000 llbs and it is the perfect place to put all of your engine parts and keep them organized and off the floor and take up less floor space. These wire shelves also have wheels on them so you can wheel them out of the way when you need to.

@JoshVanVeld

Жыл бұрын

Thanks for the tip Bob!

Enjoyed your video. 18:54 - what a pickle, have been there before but through therapy, I have managed to forget the incident - until now! Most people have no idea, but I do - you have a gazillion hours into recording footage, writing your narrative and editing. It works well - very fun to watch!

Ughhh so sorry to see this. I had an 03 s type r Jag I blew the motor on it crushed me. You'll have her up running better then ever!!

@JoshVanVeld

10 ай бұрын

Thanks for the vote of confidence! Hate to be a part of the blown motor club but learning valuable lessons from it.

Trans line c-clip pnum #24205103. Regarding blocking off the oil cooler ports, that is ok for an only street driven car but the better way to raise temps is to buy a thermostat kit like the one from Improved Racing. You get -10an lines as well which will increase flow and oil pressure at speed as well as it allows the oil to get to 200F before the oil thermostat opens to allow the cooler to do its job. Great video, excited to see where you go with the build.

@JoshVanVeld

Жыл бұрын

Thank you!! For some reason this got caught in the spam filter and I didn't see it until now. Appreciate you digging up that part number and the tip on the thermostat.

THIS CHANNEL SHOULD BE CALLED CHILLLL..GARAGE! LOLZ

@JoshVanVeld

Жыл бұрын

🤣🤣🤣🤣

I want to hear Jeff talk about the Billy Goat Tavern.

@JoshVanVeld

Жыл бұрын

I'll make a note to ask about it next time he's in town and willing to help.

@jeffslota8133

Жыл бұрын

left the Billy Goat usually mumbling not talking lol

Your Garage is beautiful. Tools all have there place. I have to do the same or I'll waste more time finding the tool than the work on the car! Hope all your plans work out!

@JoshVanVeld

Жыл бұрын

Thanks Tony!

Your next tool is a quality LED headlight. It will compliment that portable work light.

@JoshVanVeld

Ай бұрын

I know a pro tech who uses one all the time, I definitely need one.

Yes. I know the C6 Z06 was the first to get the dry sump. I bought a C5 Z06 new (museum delivery). When I took it to the track I was supposed to add a quart of oil.

@JoshVanVeld

Жыл бұрын

I had a C5Z, awesome car and the first one I ever tracked. Museum delivery would be perfect from Atlanta area, great way to get to know it on the drive home.

@richardsmith2721

Жыл бұрын

@@JoshVanVeld Museum delivery was cool. You gotta do it if you're going to take the new car depreciation hit. I was also the first person to ever start my car on the production line.

Lisle makes a tool for disconnecting GM transmission lines without removing that clip. Part#22990. As for the clips you can get OE or doorman from most parts stores. Best of luck to you!

@JoshVanVeld

Жыл бұрын

Thank you!! For some reason the spam filter caught this and I didn't see it until now.