Great explanation on this Component. I'm amazed at how much torque these things can take, given the amount of weight that's being moved through the drive train. Thanks for sharing this repair. God bless!

Great videos! Love the big tru k videos

Vibration still there. Found the problem though, yoke nut on back of front rear was loose

@melindaortiz9741

2 жыл бұрын

Oh

@skrapenpennies9947

2 жыл бұрын

The front yoke started vibrating again so I put some washers into the through shaft where the power divider shaft slides into and now is tight

@DanielHernandez-cx3vh

2 жыл бұрын

I’m having that same vibration issue while letting the truck coast at one speed I feel a vibration going at 65 mph feels like a driveshaft issue have been to 4 shops and no1 can pinpoint it have had my driveshaft balanced, u joints are fine everything is in time yokes check and nuts are tight real difficult issue to pin point

@skrapenpennies9947

2 жыл бұрын

@@DanielHernandez-cx3vh sometimes it can be tires out of round. Normally they shake at two different speeds like 45 and 65

@skrapenpennies9947

2 жыл бұрын

I had a day cab classic I pulled all the axles out and ran the truck in high gears and got up under truck and I put my finger on drive shaft while it was turning and could feel it beating against my finger. I had another drive shaft made solved the problem. They are not that much to get made at power train. Usually the yokes on shaft are bad. I would put new u joints in and they would still move when I pushed on shaft

I think some of that movement you have when the yoke is off is fine.

Curious to know if after a year later of fixing your part of iter if it's still working

I really appreciate you brother Great video & great camera work & explanation

did you have to use heat with the big gun and one inch socket?

Is there a kit I can buy those washers mine is loose to? Thanks nice video.

red silicone is the winner here, get me the name of it, i got to get that for me, looks like it gets glued up pretty good

@skrapenpennies9947

Жыл бұрын

It's permetex high heat. Never had a leak with it on anything

So is that Ingersoll, rand 261 how is the power? to me, they seem extremely heavy I prefer the 2146Q1MAX

How did it do man ? Good video

Replace bronze bushing too

ok men

Good stuff, great video where did you get rebuild kit? I need to do mine

@skrapenpennies9947

28 күн бұрын

There's a place called power train nearby. They also build driveshafts

My truck has problem when I turn differential switch on I hear air does something but only one rear wheel spinning on passenger side. What can be the problem? What's need be checked or replaced?

@shubhamsaindane

Жыл бұрын

Hey bro you check your truck axial spinning axial meaning and another axial I think your axial are dameg

I got the same problem did you fixed the problem with the washer??

@skrapenpennies9947

2 жыл бұрын

I put a few washers inside the through shaft. It's working good.

@skrapenpennies9947

Жыл бұрын

It was the yoke on drive shaft causing the vibration

@patrickgunning478

Жыл бұрын

There's a shim pack at the input retainer no need for any extra washers

Floor jack would of help loosen instead of banging the screw driver in

@skrapenpennies9947

3 ай бұрын

Great idea

If ou ever gotta pull it apart again punch the pins out the back it'll practically fall apart

what causeing the vibration

@skrapenpennies9947

Жыл бұрын

Yoke on the driveshaft was worn.

Should of not used a 12 point socket to take that off should of used a six point socket

@skrapenpennies9947

14 күн бұрын

Its the only one i had that would fit and it took me an hour to find that one😂😂