What a stunning little Machine, I think that it is very lucky that it met you ; )

Nice work on bringing the puch back to life. Cheers

Really nice Moped👍

*Very nice!* ( *I really love mopeds...but at 225lbs. I'm far too heavy for them and they always break something somewherefrom being over-stressed from weight* ) *I was in a very bad situation once, economically, and I bought an almost unused '97 'Tomos' for $800 to get to work with, and it was sheer exhaustion to ride it because of the very weak suspension and the RELENTLESS vibrations from the engine causing 'tingling' that lasted for half-hour after riding!* *I bought an old 'QT-50' at a yard-sale for $100 some years later...once again, I was just too heavy for it! The exhaust-header had a bolt fitted to the swing-arm and any heavy 'bump' caused the header-pipe to force-down off the bolt-threads...I fixedit 2x and gave-up and sold it* *I bought an '08 Honda 'Metropolitan' in 'show-room' condition 2.5yrs. ago from 'Craigslist' for $1150...and NEVER had any problems of any kind since day-one and with minor 'performance mods' runs 42-43mph on level roads and will haul an unbelievable amount of groceries home and me with no problems at all...it's a definite 'keeper!'*

@geraldscott4302

2 жыл бұрын

Too heavy for them? I weigh 240 and have several mopeds. I ride them all the time, and have never had any problems. You will never catch me on a 4 stroke plastic CVT scooter. I do have a 1979 Vespa P200E 2 stroke manual shift scooter, all metal, no plastic. Tomos mopeds have always had super weak rear suspension, that can be fixed by replacing the shocks with super heavy duty Puch shocks. They are 1" longer, and a LOT stronger. Vibrations? It is an internal combustion powered MACHINE. Real mopeds do need to be tinkered with sometimes. All 4 of mine are '70s models. They are a hobby www.mopedarmy.com I use a car for transportation. I also have three full sized motorcycles.

@gerrynightingale9045

2 жыл бұрын

@@geraldscott4302 *HEY ASS-HAT!* *YOU don't get to tell ME what my experiences were w/the 'Tomos' I bought and rode!* ___________ *'Customizing' & 'Upgrading ' MY ASS!* *I had neither the money or the time to do all that sh!t which would do NOTHING to eliminate the constant PHUCKING 'BUZZING' vibrations!* *YOU ACTUALLY DARE TO CALL ME A 'LIAR' you m-fkr?* *PHUCK OFF!* ___________ *My 'Metro' has plastic that is now almost 14-years old and still look 'showroom fresh' and none makes any sounds or 'squeaks' so go PHUCK YOURSELF on that!* ___________ *Why the phuck do you personally have to 'take a sh!t' on every single thing I wrote 2 YEARS AGO like I just 'took a dump' in your phucking 'Count Chocula?'* ___________ *The 'Tomos' was just not able to deal with my weight and in general was just not really that stable at top-end especially going-over unseen pot-holes and 'expansions' in pavement NONE OF WHICH WAS 'MY FAULT'* ___________ *The machine was practically 'as new' when I bought it in 2000 with 'nibs' still not worn-down on the tires so 'hard use' 'excessive mileage' or 'no maintenance' were not an issue* *And that 'Tomas' also had 'plastic parts' on it ...PLENTY OF THEM!* *The headlight nacelle/air-box/saddle/were ALL PLASTIC* *So STFU on that 'observation' you SH!THEAD!*

Nice Video! I have a 1977 Odyssey Moped and I'm planning on restoring it soon but I'm having a hard time finding the spring that disengages the pedals from spinning while driving.

GJ 👍

Mooi puchie man

@martijnklerks

5 жыл бұрын

ian van muiden thanks man.

Nederlands!!

Super nice puch😍 But what are your grips?

@martijnklerks

4 жыл бұрын

progrips

Hey, ik woon ook in Friesland (vlakbij Bolsward), is er ook een winkel ofzo waar ik onderdelen kan kopen voor de puch?? Super gedaan trouwens!

@martijnklerks

5 жыл бұрын

Dankje! De puch ziet er inmiddels al weer compleet anders uit, ik haal het meeste spul weg bij de puchshop. www.puchshop.de. En ik heb wel spul weg bij vdm puchparts

@Niggabalzz

5 жыл бұрын

@@martijnklerks oke

Hey when is that Update video comin out?

@martijnklerks

5 жыл бұрын

Soon when the weather finally clears up

hay there is that a stock cylinder with a 28 mm exhausr ? if yes watchout for leackage that may appear when the cylinder outlet isnt the sam size as the exhaust

@martijnklerks

4 жыл бұрын

it’s an airsal 50cc cilinder so it’s perfectly fine ;)

@Lenny_-zz5dy

4 жыл бұрын

Smeltie's Mopeds still depends on the size of the outlet i also had a 50 cc airsal but with a 22mm outlet there are cylinders though that have a 28mm outlet just dont want u to get oil on the exhaust its pretty annoying getting it off ;)

Geil sieht übel aus

@martijnklerks

5 жыл бұрын

Danke! Demnächst werde ich ein besseres und längeres Video hochladen, also halt dich bereit.

heb je tips waar mesen op moeten letten bij de aankoop van een Puch ?

@martijnklerks

5 жыл бұрын

Goed op letten dat het frame recht is, checken of het framenummer oke is, speling op assen enz, en hoe het blokje loopt en hoe het rijdt natuurlijk, nu zoals je kan zien ben ik niet de beste hierin, maar gelukkig als het frame nog goed is kan er een hele hoop

@daanvancooten3044

5 жыл бұрын

oh toppie, bedankt voor de tips die ga ik zeker gebruiken. @@martijnklerks

Is it capable to travel around 120km a day?

@martijnklerks

3 жыл бұрын

Sorry for the late reaction but yeah sure. Might have to fuel up a few times but it can surely do it. I was able to do 70 to 80km on a tank but stock setups could do 120 to 140km on a tank!

Hey vervang je voortand wiel voor snellere acceleratie of dat hij harder kan mijne staat op 16t En nog een vraag je .mijne die start soms en dan valt ie weer uit heb jij daar wat tegen? Want ik snap dat niet

@martijnklerks

5 жыл бұрын

Idle te laag? Of valt ie uit tijdens het rijden.

@robertjan2005

5 жыл бұрын

@@martijnklerks er moest gewoon benzine in ...... ik ben een megool

@martijnklerks

5 жыл бұрын

robertjan 2005 hahahhaahha dat had ik de aller eerste keer ook

@robertjan2005

5 жыл бұрын

@@martijnklerks ik heb hem nu 8 dagen dus ja

I have a puch aswell. we noticed that the top speed is good, but the acceleration is really slow. any idea what that could be?

@RisiCo69

2 жыл бұрын

clutch is mabey gone, so renew them. if you cant buy them make them new with kurk en glue.... use tywraps. Or the back gear on the rear wheel is to small. try bigger one than also new longer chain. than the acceleration will be much faster... you will los some speed. But love it... scooter always go in front of me by the traffic lights.... im slow they are fast but when my baby come to speed mwOooOOOOOOOOOOOOOIEUUUUUuuu 65cc, 17mm carb, expansion exhaust, gear 26/26... top speed 110 km (satelite test) Sold it ... but now im building a Tomos a35 same set up but now 70cc on the motor .... im half way now

@Frezix

2 жыл бұрын

@@RisiCo69 I already have a bigger rear gear right now. I bought my Puch a while back and I think the sprayer in the carb is too big. I'm on vacation now, but planning on buying a set to test them all. Trying to test a lot of stuff, because in my case, bicycles start of quicker, and I can't get up a little hill at a faster speed than 5km/h Thanks for the answer, will try some of these things when I get home!

@RisiCo69

2 жыл бұрын

@@Frezix Hi... buy new bougie en drive with it a cople times... check if its brown .... if its white to little gasoline... if its black it gets to much gasoline. The airfilter can also be a problem ... in the early days we put some holes in it so with a boormachine to get more air haha thats dutch i mean a drill. Is a sproeier a sprayer ? Ben je Nederland ? Oke succes with the PUCH MAXI... greetings and enjoy your vacation. Sorry for my bad english.

@Frezix

2 жыл бұрын

@@RisiCo69 Ik ga al de dingen die je zei eens proberen en zo gewoon elimineren. Kwa airfilter hebt ik een powerfilter, omdat de originele helemaal versleten was bij aankoop. Ik ge gewoon nog wat forums afgaan, maar ik apprecieer je help ten zeerste! Dankjewel!

Puch ondertussen weer verkocht zie ik

Had je dan voortandwiel 13 en achter 48

hey this one looks familiar

J'ai une tro belle puch

They just gave you all of those parts for free?? Wtf

@martijnklerks

4 жыл бұрын

No, i paid for every single part myself. i have just gotten great support and help when needed.

السلام عليكم كم سعر المحرك بالدينار الجزائري

@martijnklerks

5 жыл бұрын

"How much does the engine cost in Algerian dinars?" great question! this engine cost me roughly 150 euro's which is about 20101.785 algerian dinar.