PS3 Slim Red Light Blinks And Three Beeps
I successfully troubleshoot and repair the PS3, demonstrating various diagnostic and repair techniques.
The red light of death usually indicates overheating, but it can also mean other bad components, i.e., the NAND chip, southbridge, and the CPU processor chip.
Usually, hardware failure is indicated with the yellow light of death, but some components can fail and instead trigger a red light.
This is slim so it won't have a yellow light.
Also, 3 beeps and flashing red lights can be caused by overheating.
ps3 red light blinking
ps3 red light of death fix
ps3 blinking red light fix
ps3 3 beeps flashing red light fix
ps3 slim
Enjoy!
00:00 Intro
00:35 Initial Problem
01:00 Disassembling a PS3
02:50 Diagnostic Steps
10:52 Further Testing
20:05 Diagnostic tests
31:42 Use UART to test system behavior
39:00 Additional Troubleshooting
42:00 Replace the South Bridge to fix the issue
44:50 Improving thermal contact
46:00 Final Steps
Пікірлер: 70
This is Way better than the other so-called fixed I saw on youtube, they made it look too simple.
You are the best repairman of PlayStation
You are right sir. In pakistan, very few people do such component level repair. I really appreciate you work. May God bless you sir prosperity and success in both life. Allah hafiz
I think this is the heaviest problem goes to mine.. 3 beeps after 8 or 9 seconds. Have idea for that?. . My case first is yload, i clean all dust and resamble it back, still red light, than i re paste thermal of both ic, still 3 beep red light after 5 second green, and than add more tantalum caps, than it 3 beeps as your case after 9 second.. thats 5 month a go, and today i found it again in the cellar under the cupboard, before i disassembly it again, i found this your vdo 9month ago? 😫😭 So sad i dont have welding machine.. so i give up 🙅🏻♂️🤷🏻♂️🤷🏻♂️ .i should sell it. . So that ic you replace with new one, not reballing it? Does it broken or what? . Btw, your video so complete. This is a real tutorial vdo, step by step, wich is so good, not like others ch, thanks sir, hope you still good well heallthy.. great job 👍👍👍👍👍.. . And the sony manufacture never release their manual service book and troubleshoot for technician beside we must sent it back to the main dealer to send to the manufacture😆😆😆 . Problem solved, welldone 👋👋👋👋👋
Awesome and informative.
@idreestech
2 жыл бұрын
Much Love!
Excellent work
@idreestech
2 жыл бұрын
Many thanks
Well done sir and I love
Awesome video!! Great patience and deep dive of problems. I have similar red light with beeps... but have a short on the power rail of the CPU and GPU. Any tips please?
@idreestech
2 жыл бұрын
Check for the FETs. If both power rails are short then check short curcuit for 12 volts that go to FET.
great work sir did you reball or change the south bridge 39:39
Thank you teacher be blessed 🙏
@idreestech
2 жыл бұрын
Thank you too
Hi I'm also have the same problem tr to repaste the termal but it doesn't work.So I have to follow your step,can u list what item u used in your video?
Well done sir!
@idreestech
2 жыл бұрын
Thanks dear!
What temperature you use on air gun for that work preheating whole motherboard and that chip ? Tnx!
Nice work
That's so cool >>> (Ice Cream Stick) :D Solve the problem with the ice cream stick hahaha :D why you did not reball the cell? You have a reball station.
My ps3 slim same complaint ... Please can help me
I watch all the videos you put on KZread and I enjoy making the devices
"Now, I check the thermal circuit." "Now, I turn my oscilloscope to analogue mode." These kinds of sentences that tell us what you're going to do next help us a lot. Thank you for them. I have been watching you videos for several months now, and I've noticed clear improvements: Now, you use very good angles, you explain what you're going to do. You also mention the values that the components should have. The videos are excellent! P.S. Why did ground the component on the other side of the board at 11:32? Did you verify that way that it wasn't faulty? If you did, how does grounding help you conclude that it's not faulty? What a complicated repair! This one took a lot of problem solving to get working again.
@idreestech
2 жыл бұрын
I just Ground Tristate to check whether the console was bricked or not and it was not. Because if it would be bricked then the green light says on and no three beeps.
mine powers on for a while and beep red light like shown on video
Good
@idreestech
Жыл бұрын
Thanks
Basically what is the problem
hi Sir i just wanted to ask you did u changed the south-bridge with another one new or did you reballed the original southbrige and installed it again
@idreestech
2 жыл бұрын
Yes changed the south-bridge with another one.
Tank you bro 🤙
@idreestech
2 жыл бұрын
Welcome 👍
Wel done master
@idreestech
2 жыл бұрын
Much Love!
I'm having a very similar problem to the system in this video. Each time it beeps three times and shuts down with the blinking red light. If i repeat this, eventually, the system starts up. Then, randomly during a game, it will shut down with three beeps and the red light blinking again. Any ideas as to what can cause this behavior? I've searched everywhere for a fix, and came across your videos. I really like how you explain your solutions and how you came up with them
@idreestech
10 ай бұрын
Thanks indeed!
I said please work to mines and it was fixed but this video is still good
my ps3 slim does not have 1.8v on the cpu and gpu coils, it has 12v on the other coils, would you know what it could be?
@idreestech
10 ай бұрын
The CPU and GPU coils should have 1.00 volt in output terminal. If not check for the switching signals on input terminal that is from the PWM chip on the FETs. the PWM chis located at the backside of the motherbord behind the FETs. Verify the bias resistances for the PWM chip.
@messiasandrade4086
10 ай бұрын
@@idreestechthanks❤
Uncle number mil skta apka? Same to same yahi problem
Sir...Mere ps3 slim mein bhi same yahi problem hai? 3 beeps red light blinking kaise theek hoga.😫 🙏🏼PLEASE BATAAYE 🙏🏼
@idreestech
Жыл бұрын
Try accordingly
I don't have a welding machine, is applying heat to the same area useful
@idreestech
2 жыл бұрын
First, pre-heat the whole motherboard then throw heat to the specific chip from up and below.
Please Master explain more on that cable how does it work in the arcade?
@idreestech
2 жыл бұрын
sure I will
good fix
hello good
@idreestech
2 жыл бұрын
Thanks for visiting
hi, top video, i have a ps3 slim cech-2504B, it turns on 2 seconds green led and immediately turns off red led, no other strange noise, i don't know what to check, can you help me thanks
@idreestech
2 жыл бұрын
Watch other videos and check.
Best approach would be connecting TTL and check the error codes for precise identification of the problem
@idreestech
Жыл бұрын
kzread.info/dash/bejne/fHtl1tCoiqyck7A.html
👍
Hi I hope you can help me I have a PS3 whit error code 8002F14E PS3 model 3001
@idreestech
2 жыл бұрын
No idea, just google it.
How can I get in contact to fix a board? :)
@idreestech
2 жыл бұрын
WhatsApp call.
أخي الكريم ياريت ترجمه بل عربي 😂 وشكرا لك
@idreestech
Жыл бұрын
قامت Google بالفعل بترجمتها إلى اللغة العربية. فقط انقر فوق علامة التبويب التسمية التوضيحية.
aleast you didnt wack it withhot air like everyone else thatys a sub from me
Udru/Hindu main b vdos bnae. Shukran
O
Mujhe yah chahie
470 v6 ic hai
@idreestech
6 ай бұрын
I have a lot of motherboards.
What is the cost of PS 3 second hand in Pakistan
@idreestech
Жыл бұрын
18000 Pkr
@wekeywekey1652
Жыл бұрын
@@idreestech ok 👍