A quick side-by-side comparison of the prusa mini firmware update. More info here:makezine.com/article/digital-...
Жүктеу.....
Пікірлер: 18
@TheeGrandmaster8 ай бұрын
Who are these commenters that think this isn't a significant difference? It's literally twice as fast if not more.
@tyotee43618 ай бұрын
Damn, thats lightning quick. Thanks for posting, I'm waiting to install until it hits live in a few months.
@3dpprofessor8 ай бұрын
So what's the verdict? Is the print better looking and done faster, or is it no real difference?
@MAKE
8 ай бұрын
2-3x faster. Prints look the same.
@KeithStrang8 ай бұрын
Would love to understand the ‘tech’ that went into this. Guessing this is in response to Bamboo and their harmonics profiling. So cool that just new firmware can achieve this. Same hardware, just better brain.
@Alex-kr7zr
8 ай бұрын
The "Loveboard" most likely already has accelerometers on board to achieve these results with "just" a firmware update.
@ericolofsson
11 күн бұрын
Prusa use a fork of Marlin. Marlin added input shaping in Marlin 2.1.2. Decenber 2022. Since the printer dont have a acelerometers, i assume they took a lot of minis and resonance tested them an build a generic profile.
@wrxsubaru028 ай бұрын
Where is the sound?
@mr2981
8 ай бұрын
Uh, you want to listen to sped up 3d printing?
@IvanJoel8 ай бұрын
it doesnt seem that much faster but i guess it makes a difference on long prints
@MAKE
8 ай бұрын
2-3x faster
@IvanJoel
8 ай бұрын
@@MAKE then yes, much faster 😳
@cybergnetwork5888 ай бұрын
For me a 42 mins print, it is down to 23 mins. It is NOT 2 or 3 x faster. But it is definitely very fast for the same print quality. * Note: Mine is modded with an E3Dv6 hotend and a MK3S+ extruder
@Rockjay288
8 ай бұрын
42 to 23 is almost 2x faster.
@VanBurenOfficial8 ай бұрын
Amazing hardware, if only the software was better!! Such a pain with the corrupted USB sticks!
@MAKE
8 ай бұрын
I've had mine for years and never had a single corrupted usb stick. weird! -caleb kraft
@NoxmilesDe
5 ай бұрын
I have 2 corrupted sticks. The included and a Samsung actually today 😂
@GeekDetour8 ай бұрын
Impossible to draw any conclusion about print quality - very dark lighting… it’s a pitty.
Пікірлер: 18
Who are these commenters that think this isn't a significant difference? It's literally twice as fast if not more.
Damn, thats lightning quick. Thanks for posting, I'm waiting to install until it hits live in a few months.
So what's the verdict? Is the print better looking and done faster, or is it no real difference?
@MAKE
8 ай бұрын
2-3x faster. Prints look the same.
Would love to understand the ‘tech’ that went into this. Guessing this is in response to Bamboo and their harmonics profiling. So cool that just new firmware can achieve this. Same hardware, just better brain.
@Alex-kr7zr
8 ай бұрын
The "Loveboard" most likely already has accelerometers on board to achieve these results with "just" a firmware update.
@ericolofsson
11 күн бұрын
Prusa use a fork of Marlin. Marlin added input shaping in Marlin 2.1.2. Decenber 2022. Since the printer dont have a acelerometers, i assume they took a lot of minis and resonance tested them an build a generic profile.
Where is the sound?
@mr2981
8 ай бұрын
Uh, you want to listen to sped up 3d printing?
it doesnt seem that much faster but i guess it makes a difference on long prints
@MAKE
8 ай бұрын
2-3x faster
@IvanJoel
8 ай бұрын
@@MAKE then yes, much faster 😳
For me a 42 mins print, it is down to 23 mins. It is NOT 2 or 3 x faster. But it is definitely very fast for the same print quality. * Note: Mine is modded with an E3Dv6 hotend and a MK3S+ extruder
@Rockjay288
8 ай бұрын
42 to 23 is almost 2x faster.
Amazing hardware, if only the software was better!! Such a pain with the corrupted USB sticks!
@MAKE
8 ай бұрын
I've had mine for years and never had a single corrupted usb stick. weird! -caleb kraft
@NoxmilesDe
5 ай бұрын
I have 2 corrupted sticks. The included and a Samsung actually today 😂
Impossible to draw any conclusion about print quality - very dark lighting… it’s a pitty.