Absolutely outstanding, you've clearly done this a lot. I purchased this trigger kit and have an XDM Elite OSP and plan to do the swap using the blue springs. After watching this I now feel confident in doing this.

Worked amazing feels much better than the stock heavy squishy trigger with no defined breakpoint. its now smooth and crisp

Thank you, this was a huge help and I love the trigger!! I got the exact same trigger weight.

Wow so informative, thank you

Love you trigger man!

Well done!! You make it look soooooo easy!

Are y’all gonna ever post a video for the only spring kit? I got my package and there’s not a video, instructions or anything on the package describing or labeling the springs by picture on the packaging paper. Would be greatly helpful!

I never realized how bad the trigger was until today. Shooting multiple guns (echelon and a custom p80) . It felt like a sponge with unpredictable break.

I want to order a red flat face trigger that I found online, thank you for this video

I would never do this but TU for detailed film. trigger on XDM elite is just fine as is although heavy 5 pounds. but i can see this making it even better.

The stock sear spring is lighter than the sear spring that comes with the kit. What's up with that?

Will this kit negatively effect reliability? I want the drop in aluminum trigger but the site, states i need the safety bar? For it work?

Why do some of these "Elites" have a double reset? From what I can tell yours doesn't.

I left my old trigger on it n it is lighter but also acts like a reset trigger

Will this work with a xdm 3.8 45 compact. Non elite version

I own an xdm elite 5.25 . I purchased a spring kit set from Toni systems . Trigger spring , shear spring , striker spring , striker safery and and the triker counter spring . 5 in total . My trigger pull came down to 3.5/3.7 pounds but I found out that my gun would NOT fire all the ammo . I got light primer strikes and had to choose specific brands and types of ammo . Is this normal ?

@warrenhartz6211

Жыл бұрын

I have an XDM elite 10mm. I got a PRP kit for it. Using the competition striker spring (blue color) I got about 40% failures to fire. I installed the other supplied spring and got one failure in 75 rounds. All of the primers had light strikes with both springs. All of the rounds would fire on the second strike. I am using Winchester primers in new Starline cases.

@devindrewery4772

Ай бұрын

​@warrenhartz6211 did you purchase the extreme kit or the standard kit?

I have a xdm I installed my trigger kits in it prp getting 3.and half trigger pull

Will this work with the original xdm

Is it possible to use the stock flat trigger instead of the one that comes with the kit?

@aaronjaggars321

2 жыл бұрын

That's what I did hopefully I didn't fuck anything up lol

@RadDadisRad

2 жыл бұрын

Yes. Doesn’t matter.

Will this kit fit on a tisas px9 gen 3? Think its a clone of the xd..

Does this work in the osp elite

Why does me keep getting stuck after applying sear? The sear seems like its not sitting correctly so when i push down on it, the safty grip just stays stuck. This happened the 3rd time already and honestly im scared 😱

Would this kit negatively effect the reliability of the xdm? What if I keep all the old springs and just use the improved hardware? Like with apex trigger kits. It comes with a page with instructions on how light one wants their trigger to be.

@Nchai-Yang

5 ай бұрын

I just installed the Extreme flat aluminum trigger kit to my XDM 10mm 3.8. I actually did it the opposite. Used the new springs and kept the old hardware just to test it out and it did not like that at all. The trigger did not work for what ever reason and I did not want to dig into it. Once all components that came with the kit was installed, the trigger was flawless. I do not have a trigger pull tester but definitely could really tell the difference. Took it to the range right away, put 150rds through it with no issues at all. Only time will tell regarding reliability. So far I am happy with it and highly recommend it in my opinion.

@unitedwestanddividedwefall3521

5 ай бұрын

@@Nchai-Yang nice, thanks for the response. So did you use all the new springs as well? The low striker spring may cause light strikes, read on forums that’s what happens.

@unitedwestanddividedwefall3521

5 ай бұрын

@@Nchai-Yang on their site, it doesn’t say anything in detail other than , that the trigger won’t work if one doesn’t use their propriety disconnect. I may get the kit and change out the components but use the factory springs to keep reliable strikes, the trigger shoe looks great and it’s aluminum too.

@Nchai-Yang

5 ай бұрын

@@unitedwestanddividedwefall3521 I used the striker, striker safety, trigger bar and the sear springs. Did not know about the low strikes, thank you for the info will have to keep and eye out for it. Definitely plan on putting more rounds through it, lets hope all is good.

What is that U-notch brand? I am looking for exacly the same for my XDM.

On your previous videos you left out one of those springs, do do have to reuse it with this kit?

Are the frame rails all plastic or are they metal?

@czwarlord9243

2 жыл бұрын

Rear rails are plastic. Forward rails are steel

How does this effect reliability?

@jackomalley3687

Жыл бұрын

For a carry gun would never trust it

can i have that delivered to the philippines?

Not sure carrying a 2.5lb trigger for CCW is a good idea

@electroniccheeks

Жыл бұрын

It's not a bad idea.

What does the blue spring do different? Which one should you use?

@RadDadisRad

2 жыл бұрын

It’s lighter weight

😐😎

WTF??? UR SKIPPING ENTIRE SECTIONS????? THESE INSTRUCTIONS ARE USELESS WITHOUT THEM. EPIC FAIL!!!!