Thanks for the video, I have the Evo bars and sanded the clutch lever end for a couple of minutes with 220 grit paper then wiped with a clean paper towel with Windex. Then I went and washed my hands 😁. Then I used a little more Windex to wet.the bar end and inside the Odi v2 grip slightly and it slid right on.👍🏼

Thank you so much you just saved my day as I have the exact Demario putting my new grips on my new evo bars not knowing what the heck to do 👏🏼👏🏼👏🏼

Wow cool video as always can’t wait for the riding season to start hope to see the 65 along with the 110 keep up the good work 👍🏻👍🏻👍🏻

@DadsDomain

4 жыл бұрын

Tyler and his cousin tried riding in the snow. They didn’t make it long and his cousin crashed pretty much right away. We’re all ready for spring!

@regianeduarte2000

4 жыл бұрын

Lol tell them I hope there ok

Xr400r pro taper evos windham bend with risers. 6 ft tall. Very comfortable now. Tried Pastrana fmx bend and Henry reed but windham is right in middle.

Literally just installed this same set up on my yz450 yesterday lol.

@wbz56

Жыл бұрын

Did you put the adventure or the adventure high?? Cause im thinking about putting these one my yz250f. But scared they maybe to high. Im 6'1

@haussman242

Жыл бұрын

@@wbz56 I did the CR high. I haven’t been able to go out and ride it since the installation. I’m 5’11 and it seems to be okay, don’t know for sure though. I will say they’re definitely not to high.

The lock on grips will install on the ProTaper bar without having to file down the bar (this is not a good move). Just back that 3mm screw out a little more...once you get them started, they slid on easy.

@DadsDomain

4 жыл бұрын

I could have tried a little hard....I had an ODI rotating grip a long time ago that wouldn't fit unless I filed it so I just assumed I'd have that problem here too. But so far nothing has moved

@jarredrios6544

3 жыл бұрын

I actually got the same grips for my pit bike(KLX110L), and completely destroyed the bar end of the clutch side grip trying to get it to fit.. Closest I can get is about 2 inches out. The clamp is fine, but the plastic insert is just too tight. Great grips for stock bars, wish I would have sanded mine first on my SE’s though. :/

I stayed with the stock renthal bars and got some red white and blue odi emig grips

@DadsDomain

4 жыл бұрын

The stock bars were actually pretty good. Honestly I probably could have gone with risers and been basically just as happy

Did you have to drill holes in the bars for the alignment pins?

I’m curious how you do like them. I’ve been running Pro Taper pillow tops for years, but like the clamp on style of those like the KTM. Just picked up my 2020 450L and looking at options.

@DadsDomain

4 жыл бұрын

I really haven’t gotten to use them yet but I like them from what I can tell so far. I too have ran pillow tops and those tag rebound grips before and I was just looking for something different. These grips have a nice initial comfort too then so I hope they hold up

Nice video! I'm the same height as you.... do you have a link to the same bar risers you used?

@DadsDomain

4 жыл бұрын

I just updated the description with a link for the ones I used and the adapters with no rise. Thanks for asking I forgot to include them!

I'm surprised they used 7/8" bars on such an expensive bike. My 2019 WR 450F came stock with 1 1/8" bars. I've always used 1 1/8" risers with CR High Bend bars but, I'm only 5'11".

@DadsDomain

4 жыл бұрын

My sons YZ65 came with 1 1/8” I believe as well, pretty sure it’s protaper. It’s a single bar and while I never looked close pretty sure it’s not a 7/8” I feel like if you combined Honda and Yamaha you would eliminate the flaws of both companies. I have heard that WR is a hell of a bike. I hope Yamaha makes a street legal version someday too

hey love what u do man motivates me ! have u ridden a 690 ktm or 701 husky enduro im looking at both and the 790 adv r all 2020 i gotta make my mind up im 325 6 ft 2 or 3 and i wana rip fire rodes and trails and commute when its nice out ten miles each way to work and take rides from boston to nh and local trails i have no trailer so need dual sport style . i need a revalve and springs im sure right but any thoughts on speed on highway and cruising and fun in general on these bikes ? tell me what u think thanks

@DadsDomain

4 жыл бұрын

Unfortunately I have not gotten to ride a modern ktm/husky but I wish I could. I think any of those bikes can do fire roads without thinking especially if you have good tires. From there imo how technical are your trails vs how many road miles you want to put on. That might help. Eventually this year the kids want to do an open ride day at the Mx park. When I got this bike I needed something for roads, fire roads, off road park, and Mx track. Not the best bike for any one thing but it was my top pick for all of those because honestly working on this bike feels really similar to my old 06 450r. Good luck on the choice! Part of the fun

You did not have to cut the stock grips as you were already replacing the whole handlebar. Just saying.... also, are you considering replacing the rubber brake hose with an armored one, please?

Hi, This is the EVO SX Race Medium?

Did you have to trim the bar pad to make it fit?

@DadsDomain

4 жыл бұрын

I got it on but I need to trim it a little. I just keep forgetting to do it

@disapirrie658

4 жыл бұрын

Got them installed on my 250l today. A bit of a pita! Had to drill out both sides so the pins would fit and had to trim the bar pad and cover. I really like the end results though.

Hi I have a question my dad wants a bike but he isn’t sure what to get I said Honda but we can’t decide which the 450L or the 250L

@DadsDomain

4 жыл бұрын

I would have him watch the comparison video I did as a starting point. Cost can be a big factor. The next would be how hard he wants to ride and how much maintenance he wants to do. Both are great bikes. But they are both really different

@regianeduarte2000

4 жыл бұрын

I have him watch the video thank you so much 👍🏻👍🏻👍🏻

Can you reach the key with the new bar pad on?

@DadsDomain

4 жыл бұрын

Yep it’s just a little bit under it but no clearance issues

you could avoid cutting the original grips, remove them with compressed air, and maybe give them to a child with minicross