This ratchet will be perfect for me. I have a brake job coming up soon on my car. I never owned an electric ratchet and have been thinking of getting one. I like the pass-thru feature and I am already a Milwaukee tool user (I have 2nd gen 1/2 impact high torque, DA polisher and the M18 inflator). I think I will get this and add it to my collection. I can see myself doing more DIY work on my car with this tool.

@Brymoiamaro

7 ай бұрын

get the mid torque, it’s lighter and it can still do most work

I just bought the 1/2" anvil and use them all when I need and really do not find myself using the insider sockets unless I need them. I like the fact that you can have all 3 sizes on one ratchet.

I have the new 2967 impact driver because I kept running into instances where the smaller DeWalt impact I have wasn’t quite able to either loosen something, or drive in a longer lag bolt or something, very well. I feel like I probably overkilled it now but I think it’s really cool to have on hand. Yes, I have some tools from the DeWalt ecosystem and some from Milwaukee. 😬

Great video

I’m gonna be honest as someone that doesn’t like Milwaukee as much as dewalt I will say they make some really cool tools and I wish dewalt makes a better power stack that preforms as good as the forged 6.0 line mill is coming out with.

@Enrightauto

10 ай бұрын

Yea I’ve seen the videos of their power stack batteries and they weren’t very impressive. Not sure what the deal is with that. Their tools are great though and have a ton of power I’ve heard

@TranTek

10 ай бұрын

i use them both, what DeWalt said was they are a business company some designer really come up with some very good idea for DeWalt i find the grips of DeWalt always good but not so good with motor i hear from many skill trade motor crap out after 2 years heavy use

@gunshow12

10 ай бұрын

​@@EnrightautoI think the longer handle has to deal with ppl wearing like thick gloves an they can handle it an be able to use it .. they probably did it for the eletrical industry or something that kinda what I been hearing from ppl

@kurtm54

10 ай бұрын

This is definitely an example of where competition in the area is beneficial for the consumer

@Codeman785

13 күн бұрын

Milwaukee is the way to go man

How’s the bit retention when using the 3/8 or 1/4 anvil? I bought mine for work (electrician) and we do a lot of switchgear and shit

I dont use the Insider for the torque really, i just use it as a normal ratchet for stuck bolts as extra leverage then pull on the lever for it to come off fully.

Longer handle is likely to create more space from CPU (handle mounted) from high heat from motor.

Good vid... Forgot to mentioned the price benefit between the milwaukee and the snap on.... For the $$milwaukee is killing it with new innovation and performance... Meanwhile Snap on brings up new/old technology for triple the price...😅😅 For what is worth, snap on hand tools are unmatched for now!!!

@Enrightauto

8 ай бұрын

Thanks for watching

@VULSx3

8 ай бұрын

For reals

doesit have torque regulation on reverse mode?

Hey man, I loved your review, it seemed honest. I subscribed, is there anyway you’d be willing to compare Dewalt equivalents of these? I’m looking at buying a set in the next week or two. Thank you for your time. It saves us time. I appreciate you. I’m so serious about getting a set that you’re the first person in the last 14 years I’ve ever turned on notification alerts for, hope you do a video.

@Enrightauto

9 ай бұрын

Unfortunately I have no dewalt tools and don’t plan to buy any I am sorry. Would love to test them but it’s just hard to buy all the brands when social media isnt what pays the bills :)

@bakoguy5330

9 ай бұрын

@@Enrightauto yeah, I buy a lot of Milwaukee, but Dewalt does kick their ass in some tools, I believe the ratchet is one of them.

@Enrightauto

9 ай бұрын

@@bakoguy5330 yea the new insider ratchet makes up a bunch but it’s hard to compare a Milwaukee ratchet to a dewalt due to the size difference. The dewalts are bulky

The handle of the new Milwaukee M18 high torque was extended because the electrical components are now in the handle in a metal casing

@Enrightauto

9 ай бұрын

It’s not the only reason.

@toolsdealsautomobiles6980

8 ай бұрын

What other reason did they extend the handle?

@Enrightauto

8 ай бұрын

@@toolsdealsautomobiles6980 I talked about it in the video 👍

What would you recommend buying first, just a “hobbyist” wrench some nights during week and weekends don’t got a 1/2 impact or electric rachet I just got a 3/8 snapon with the flip (butterfly) switch

@Enrightauto

9 ай бұрын

Milwaukee if you are a hobbyist or Hercules high torque from harbor freight

@coryt-notctk6822

9 ай бұрын

@@Enrightauto I’m alrdy invested in the Milwaukee eco system I was just wondering if I should buy the new 1/2 or insider rachet 1st

Tour of that KRSC100 pleeeeaaaseee!!!!!! Lol

@Enrightauto

10 ай бұрын

Have a tour on my page :)

I bump the switch often. 2xl glove size. I wish the switch was on the top like the m12.

@Enrightauto

10 ай бұрын

Well then this new design will benefit you greatly. Thanks for letting me know. I had never heard that complaint before. Glad to know it’s warranted

@cortezaz

10 ай бұрын

Me too 2xl gloves hit that button when it starts vibrating.

@benfarms31

6 ай бұрын

I do that all the time and it drives me crazy

I bump the selector button a lot on my Milwaukee 1/2…

I have been waiting for the insider to be available, but loooks like it will take a while, do you think i should wait for it or just get the high speed extended one?

@Enrightauto

6 ай бұрын

Jdtco has them

@NAVPRO2023

5 ай бұрын

Some other online stores (Ohiio Power tools, Summit, FAO) have them in stock as well, and i was able to order one from Blain's Farm and Fleet; they are based out of WI, but i was able to order and get it shipped to SOCAL. Only issue with them is that they dont do free returns if you change your mind.

@NAVPRO2023

5 ай бұрын

And I did buy both the Insider and the high-speed 3/8ths, i love both, but cant decide which one to keep! I dont need both!

@LLAMA-LLAMA

3 ай бұрын

@@NAVPRO2023same here😱

Does the Stanley insider ratchet sockets work on the Milwaukee. They look identical

@Enrightauto

8 ай бұрын

Doubtful but I guess it’s possible

@Odin33356

8 ай бұрын

@@Enrightauto I'll let you know.

Assuming the amperage is the same that extra 2 volts is enough for en extra oompf

What's a power socket?

@Enrightauto

9 ай бұрын

amzn.to/45lvgy1 so you don’t lose torque and power through the socket.

I like your review. I would like to see you compare it to DeWalt dcf 961

@Enrightauto

7 ай бұрын

I would love to. Buy me one and send it and I’ll compare 😏

@JVBL1

7 ай бұрын

@@Enrightauto the viewers would love it

@Enrightauto

7 ай бұрын

@@JVBL1 I agree! Lmk when you ship it out 😏

@JVBL1

7 ай бұрын

@@Enrightauto I liked your video on the review. I think you would do a good video comparison. I just think it’s a bit of a long shot for me to buy something send it to you and hopefully receive it back when I don’t know if I even want the product in the first place. I have the second gen Milwaukee impact wrench (the corrected version) and was looking into upgrading to the gen 3 but was amazed by the dcf961. I just think gen 3 has better ergonomics but dcf961 holds more power.

@Enrightauto

7 ай бұрын

@@JVBL1 I’m kidding my man 😂 just messing around with you.

Which milwaukee ratchet would you choose standard version or extended reach version or the insider?

@Enrightauto

8 ай бұрын

Insider

@Berenspayton

8 ай бұрын

@@Enrightauto ​​⁠without a doubt you would get the insider again? I feel 50/50 about it as others have tried this design and didnt work out well in the end

@Enrightauto

8 ай бұрын

@@Berenspayton it’s not going to be the perfect everyday ratchet but I’m very happy with it. I personally like the snap on extended reaches the best still. But I use the insider a lot as well

@Berenspayton

8 ай бұрын

@@Enrightauto for sure, just wondering what is the best option out of the three tbh as im looking to purchase one not all three

@Enrightauto

8 ай бұрын

@@Berenspayton can’t say which is the “best” wish it was that easy. Everyone works on different stuff day to day so what may be the best for me may not be the best for you. As far as Milwaukee ratchets go the insider for me is the best choice as far as size speed and torque

handle longer cause more stuff in it, watch TTC. they take one apart

I was one of the guys who bumped the switch.

@Enrightauto

Ай бұрын

Good to know

It's about time they make that handle for full grown men

@Enrightauto

4 ай бұрын

Or just big guys 🙄

I like the fact you can change from 1/4 to 3/8 but doubt I would ever use those sockets.

@Enrightauto

10 ай бұрын

People still care what other adults spend their money on? Weird

@petebusch9069

10 ай бұрын

@@Enrightauto Yes they do. Every action a person takes tells the public a little bit about who they are. Snap On is way overpriced and everyone knows it, and is by far the worst value. People still buy it because they think it helps sell themself as a pro when we all know its the Indian, not the arrow. Snap On is all image, or at least was.

@Enrightauto

10 ай бұрын

@@petebusch9069 thank you for showing me your actions and what type of person you are. Makes it easy for me.

@petebusch9069

10 ай бұрын

@@Enrightauto Grow up

@Enrightauto

10 ай бұрын

@@petebusch9069 thank you for continuing to show me your actions and what type of person you are. 😘 thanks for the algorithm boost!

Didn’t take me long to brake this ratchet. Cool concept but it’s quickly become my least favorite Milwaukee tool. Would not recommend the insider ratchet

@Enrightauto

9 ай бұрын

Been using mine daily with 0 issues for 3 months now 🤷🏻‍♂️

Has Enright “jumped the shark”? Can’t be mad about getting free tools, but the Capri & Milwaukee vids feel forced. Definitely not as good as the “shop” vids. But hey, if your obligated, got to do what you got to do

@Enrightauto

10 ай бұрын

Love doing the shop videos. But this page was never started with shop videos. It was started and still continues to grow because of the tools. If that’s what I need to do to grow the page to help more techs and shop owners. Then I’ll continue to do it. I love tools and will always love them and will continue to do videos on them :) Not sure why you think I’m mad about free tools? Thanks for watching

Wow, you should not just blurt out your subjective preferences and declare the "handle is too long." Seriously, nobody gives a damn about that on an impact wrench. I just bought this wrench and I completely disagree with you. This thing is just a beast. There is no other 1/2" impact wrench that is even close to performance of the 2967.

lol y’all baby hand people never hear of big hand complaints

@Enrightauto

2 ай бұрын

Maybe

Cordless rachet, not a right angle impact

@Enrightauto

5 ай бұрын

Almost like I said ratchet 20 times in the video 🙄