Projection of Solids (Tamil)| Part 1-Intro & Drawing procedure | Lecture 10.1 | Engineering Graphics
A solid is a three-dimensional object, i.e. it should have three dimensions such as length, breadth, thickness etc. Various shapes of solids are considered such as prisms, pyramids, cylinder, cone etc. The topic "Projection of Solids" in Engineering Graphics describes how different 2D views of a solid has been drawn in a drawing sheet. The solid is usually located in the first quadrant formed by the principal planes and followed the first angle projection.
There are four different positions of a solid as follows,
1. Axis is parallel to both the planes
2. Axis is perpendicular to one plane and parallel to the other
3. Axis is inclined to one plane and parallel to the other
4. Axis is inclined to both the planes
Watch this part-1 Tamil video (Lecture 10.1) that explains the meaning of a solid, its positions and projections. Also, you'll learn how the simple projections of a solid are obtained when it is in the second position.
English Version:
• Projection of Solids(E...
For more videos about Engineering Graphics in both Tamil & English,
Click the following link to enter into the Channel Page :
cutt.ly/smedutalk
Projection of Planes (Tamil) | Part 4 - Problem | Lecture 9.4 | Engineering Graphics
• Projection of Planes (...
Projection of Planes (Tamil) | Part 3 - Problem | Lecture 9.3 | Engineering Graphics
• Projection of Planes (...
Projection of Planes (Tamil) | Part 2 - Problems | Lecture 9.2 | Engineering Graphics
• Projection of Planes (...
Projection of Planes (Tamil) | Part 1-Intro & Drawing procedure | Lecture 9.1 | Engineering Graphics
• Projection of Planes (...
Projection of Lines (Tamil) | Part 5 - Problems | Lecture 8.5 | Engineering Graphics
• Projection of Lines (T...
Projection of Lines (Tamil) | Part 4 - Problems | Lecture 8.4 | Engineering Graphics
• Projection of Lines (T...
Projection of Lines (Tamil) | Part 3 - Problems | Lecture 8.3 | Engineering Graphics
• Projection of Lines (T...
Projection of Lines (Tamil) | Part 2 - Problems | Lecture 8.2 | Engineering Graphics
• Projection of Lines (T...
Projection of Lines(Tamil) | Part 1-Introduction & Drawing procedure | Lecture 8.1| Engineering Graphics
• Projection of Lines (T...
Projection of Points (Tamil)| Part 2-Problems | Lecture 7 | Engineering Graphics |Dr.S.Malligarjunan
• Projection of Points (...
Projection of Points(Tamil)|Part 1-Introduction & Drawing procedure| Lecture 6 |Engineering Graphics
• Projection of Points(T...
Theory of Projection Part 1-Introduction(Tamil)| Lecture 4 |Engineering Graphics |Dr.S.Malligarjunan
• Theory of Projection P...
Orthographic Projection (Tamil) | Theory of Projection Part 2 | Lecture 5 | Engineering Graphics
• Orthographic Projectio...
Dimensioning (Tamil) | Lecture 3 | Engineering Graphics | Principles | Methods | Dr.S.Malligarjunan
• Dimensioning (Tamil) |...
Line Types & Suitable Pencils (Tamil) | Lecture 2 | Engineering Graphics | Dr.S.Malligarjunan
• Line Types & Suitable ...
Frequently used terms | Engg. Graphics | Must watch video| Tamil medium students| Dr.S.Malligarjunan
• Frequently used terms ...
Пікірлер: 18
Finally found the best teacher 💯
@SMEDUTALK
2 жыл бұрын
Thank you
@DHIN-kz3mt
Жыл бұрын
❤
Thanks a lot sir , it is very helpful to me
@SMEDUTALK
2 жыл бұрын
Most welcome
Thanks a lot sir really amazing teach✨😎..
@SMEDUTALK
2 жыл бұрын
Most welcome, keep watching.
Super sir
@SMEDUTALK
2 ай бұрын
Glad you liked it
nice sir
@SMEDUTALK
2 жыл бұрын
Thanks and welcome
Super explain
@SMEDUTALK
2 жыл бұрын
Glad you liked it
Please upload videos sir because exam are coming soon
Vioce clear ya ah illa sir
Sir
Sir plzz speaking in English
@SMEDUTALK
Жыл бұрын
English videos are also available. Please check the playlist in the channel page. But, I stopped posting English videos due to low response from the viewers.