Program Used HONDA ECM / ECU With Autel
Автокөліктер мен көлік құралдары
A shorted fuel injector took out the injector driver circuit inside this PCM. It's time for the replacement and programming. The Autel scan tool gets this handled without any extra software. Enjoy!
Honda Fit Diagnosis - • Program Used HONDA ECM...
Пікірлер: 93
Thanks for sharing GoTech👍 Was waiting for this part😉 Mike we miss you Bro😍 Stay Safe Guy's👍
@GoTechTraining
Жыл бұрын
Hi Salman, As always thanks for watching! You stay safe as well! Ryan Wilsing, Technical Instructor
@isalmankhan1
Жыл бұрын
@@GoTechTraining Thanks Ryan, Great work Bro👍
Huh! Good to know that. Thanks. I love ur videos. U make it look easy!
@GoTechTraining
Жыл бұрын
Hello Joseph, I'm glad you like the videos Thank you for supporting the GoTech channel! Ryan Wilsing, Technical Instructor
Can you change what model and make the ecu says also? Similar to the vin change?
What Autel model is this? Will this work for 2016 Acura mdx replacing/programming tcm?
Good fix. This one was lucky the used module worked in this vehicle, also that the immobilizer and vin could be changed.
@GoTechTraining
Жыл бұрын
Hi Mike, Right! With the one time use module these days, it is a breath of fresh air to be able to use a previously used module in a vehicle! Ryan Wilsing, Technical instructor
I have a 2006 Honda civic ex currently in immobilized mode I changed the immobilizer and ecm. Tried to reprogram both with autel reprogrammer but unsuccessful with error stating failed ecm/pcm is not communication error
Wich autel do u use?
what kind scann tool you used model ?
Is this Autel MS909? Just trying to purchase the right one.
How hard is to put the Autel model u used?
Who’s autel are you using
Good day, how can I update my pcm and tcm
Thanks for the video! I'm having similar problems. It would be helpful to put "Fit" in your subject line or description so it's easier to find your video.
@GoTechTraining
Жыл бұрын
Great suggestion!
What Autel scan tool are you using
Not really programming but doing the immobilizer setup and writing of vin. Good idea to see if there is updates available for a used ECM.
@GoTechTraining
Жыл бұрын
I agree, not your traditional software programming as required by a lot of manufactures. Good point that we did not mention, it is always good to look for any relevant updates to the controller after installation. I was glad a used controller could actually be used, with all the one time use modules out there, unless you do cloning or EEPROM work. Thanks for watching! Ryan Wilsing. Technical Instructor
@acesihatay8703
Жыл бұрын
@@GoTechTraining Which model is this autl?
@JoshMacon-oi8ge
3 ай бұрын
Yeah which model scan tool are you using to manipulate the computer to do what you want
What scan tool did you use in this video? And would this work on an older Honda like a 2006 accord?
how to know if your ecu is damaged
Thanks for sowing us is what steps are needed when installing a used ECM.
@GoTechTraining
Жыл бұрын
Your Welcome! Thank you for watching! Ryan Wilsing, Technical Instructor
thanks for teaching 🙏👍
@GoTechTraining
Жыл бұрын
HI Salvador, Thanks for watching the video! Even the best techs can learn something new every day ! Ryan Wilsing, Technical Instructor
Excellent fault diagnosis on the pervious video to this and then the follow up. Did you end up replacing all four injectors?
@GoTechTraining
Жыл бұрын
Hey Mick, thanks! Yeh, this thing got all four of them. Not worth risking ANOTHER PCM haha! Mike Becker, Senior Instructor
What model Autel is it??
Amazing! thank u so much, What is the model of your scanner?
@GoTechTraining
Жыл бұрын
Hey, thanks Moldesgroot! We used the Autel Maxisys Elite for this job. ~Mike
Any of the less expensive Autels for a DIYer that have this capability?
@GoTechTraining
Жыл бұрын
Hey James, I think you need the pro level tool for it...not sure though, sorry. Would be a great question for the Autel Facebook groups. ~Mike
Nice, what model is that? I have the ms906bt, i also have a thinktool pros, snap on verus and cardaq3plus
@GoTechTraining
Жыл бұрын
Hey Michael, I'm jealous, that is a arsenal of great scan tools and I love the cardaq3plus! The Autel used in this video is the MS908s Elite Thanks for checking out the video! Ryan Wilsing, Technical Instructor
@madmike214
Жыл бұрын
Yeah I'm eyeing up the im608 which is basically the 908 with full key programming...
@GoTechTraining
Жыл бұрын
I have used it, it is a very capable tool
Hai sir i have a problem wit honda civic fd 2007 ..i was changed used ecu but after a week engine ligth on and vsa light also shown on meter ...when check with computer it shown ecu problem..how to solve sir?
@GoTechTraining
Жыл бұрын
Hello, What trouble codes is it setting? ~Ryan
Hi there My car Honda odyssey after change Alternator and battery the my car come up code P 0560 So what can I do ? Car still run and drive ok ! Thanks
@GoTechTraining
Жыл бұрын
Is the alternator putting out any charging voltage? ~Ryan
Great vid. Which scan tool is this? I'm looking for one that can do EVERYTHING! Scan, bidirectional, coding, and programming. Can you recommend one?
@GoTechTraining
Жыл бұрын
Hey Shaazy, We used the Autel Maxisys Elite for this job. It's a pretty good all around scan tool for the price. ~Ryan
Can you do a video about the evap system on a 2007 4runner, I've tried a gas cap, but it wasn't a Toyota brand, I also replaced the purge valve solenoid, and the hoses from the solenoid to the metal like going to the tank. And the hose from the solenoid to the intake. I need to know how to troubleshoot it right and a detailed info about the other components. Please thanks
@GoTechTraining
Жыл бұрын
HI Jason, What trouble codes is your 4runner setting? ~Ryan Wilsing
@jasonstanfield444
Жыл бұрын
P0441, p0455, and p0456
@GoTechTraining
Жыл бұрын
Hey Jason, One thing I would be careful of, is if the aftermarket gas cap is sealing properly, make sure to inspect the sealing surface of the filler neck where the cap seals. Assuming that it is, this vehicle runs a pretty complex EVAP system. It uses a leak detection pump located on the canister to force pressure in the system and check the system for leaks. The codes you have stored are all EVAP system leak codes. The only sure way to test the system is to use a smoke machine to pressure test the system for leaks. This will determine if the system has an actual leak or if the leak detection pump has failed and is causing a false leak code. If you can find a leak using a smoke machine the fix is simple, repair what is leaking smoke. If the system is sealed then you must determine if the leak detection pump has failed or a wiring issue with the pump has caused it to operate incorrectly. I hope it helps, I know it is a lot of information. If we get a Toyota in with this system, we will be sure to film a diagnostic video with more details. ~Ryan Wilsing
@jasonstanfield444
Жыл бұрын
Thank you it was helpful
Great video, what type of autel scanner it is please?, thanks
@GoTechTraining
Жыл бұрын
Hey Mezo, We used the Autel Maxisys Elite for this job. It's a pretty good all around scan tool for the price. ~Ryan
What kind of scanner by autel are you using
@GoTechTraining
Жыл бұрын
Hello, In this video we are using an Autel Maxisys Elite ~Ryan
I'm finding that I'm pausing your video so I can see the ECM mounting brackets so I can remove my part. It would be useful to see how it is removed from the car.
@GoTechTraining
Жыл бұрын
Hello, Yeah its really in there, comes out with the bracket. I'll add that next time. ~Ryan
Thanks a lot for sharing. Can this be done with IM608?
@GoTechTraining
Жыл бұрын
Hello, I know the IM608 will learn the keys I haven't tried a VIN re-write with it Thanks for checking out the video! Ryan Wilsing, Technical Instructor
@jivasasha
6 ай бұрын
Hi What is the autel model version? Thanks
id like to be able to reprogram a standard honda prelude 5th gen ecm apparently you can't and have to buy a p28 ecm but pretty much any chip can be unsoldered and replaced with an EEPROM its just because no one has done it before so they think you cant, i have already been able to swap out the immobiliser board on the ecm from my old one to the new one and its all works perfectly i showed this o my channel, but now i want to turbo the car so want to reprogram it
What kind of autel is you using
@GoTechTraining
Жыл бұрын
Hello, The scan tool used in this video is a Autel Maxisys MS908S Elite ~Ryan Wilsing
Thanks
@GoTechTraining
Жыл бұрын
Hey Diego, Thanks for watching! Ryan Wilsing, Technical Instructor
HOW ABOUT PROGRAMMING THE BCM ,,, BECAUSE WE ALL HAVE DONE A PCM . THANKS FOR YOUR TIME ????
@GoTechTraining
Жыл бұрын
Thanks for checking out the video! Hopefully we get some BCM issues in the future, that would be a great video to make! Ryan Wilsing, Technical Instructor
👍👍
Grasias
@GoTechTraining
Жыл бұрын
Hello Martin, Your welcome and thank you for checking out the video! Ryan Wilsing, Technical Instructor
Nice one.👍 Hey i have a question. I've read MotorAge article that when programing modern car modules, the car need to have stable power supply hooked to the battery. Not battery charger, not battery maintainer, but "stable power supply". These things are extremly expensive , the one i found - "Schumacher" is nearly 700$. Do you think this is a lie just to sell the equipment. Can i use just a battery charger ?
@GoTechTraining
Жыл бұрын
Hi Petar, In this video, the used PCM already has the operating software programed into it. We are relearning the security immobilizer and re-writing the VIN. When programing most manufactures ECMs/PCMs the modules are either blank or need software written into the module for them to operate. This can take time, sometimes hours and the battery could get dangerously low, very quickly. When a module is being programed sensitive data is transferred between module and the interface used. This data can become corrupt if too much dirty or A/C voltage gets into the system. That being said anytime you program a module it is recommended to use a stable (clean D/C voltage) power supply. The use of a normal battery charger can easily cause a module to fail during programing. Which will cause the module to brick. If a stable power supply is not available you can use a fully charged jump pack to help maintain voltage but a D/C maintainer is ideal.
@petar443
Жыл бұрын
@@GoTechTraining Thank you so much. Very well explained 👍
@ovidiumonoranu367
Жыл бұрын
@@GoTechTraining HI! I'm not a native English. So please what do you mean by 'a fully charged jump pack'?
@GoTechTraining
Жыл бұрын
@Ovidiu, a jump pack is essentially a unit that consists of a car battery with jumper cables attached to it. They are used to jump start vehicles with dead battery's or to help maintain battery voltage when testing.
@ovidiumonoranu367
Жыл бұрын
@@GoTechTraining OK. Thank you!
😳This is where Autel shines over Snap On
@GoTechTraining
Жыл бұрын
Hey Philly, I agree %100, it's always good to have a few tools in your tool box. Every tool shines in in a different category. Ryan Wilsing, Technical Instructor
@ovidiumonoranu367
Жыл бұрын
@@GoTechTraining Hi! Great diagnosis! Would you mind sharing your favorite top 3 or 5 diagnostic tools and what is the category in which one beats the others or the category in which each one shines in your opinion?
@ovidiumonoranu367
Жыл бұрын
@@GoTechTraining And please what exactly Autel scanning tool did you use in these two episodes?
@GoTechTraining
Жыл бұрын
Hi Ovidiu, that's a tough question to answer. I definitely have a few scan tools that are on my top list to use, such as the Snap-on Verus and the Autel Maxisys. But I have to mention there are a lot of scan tools I have not had a chance to use yet. As far as which one shines in what category, that question is even harder to answer. This is because each scan tool's coverage and features can change depending on the car make and model. While one scan tool works best for EVAP on a 2000 GM, another scan may work best on EVAP for a 2000 Toyota. I recommend when buying scan tool, first decide which type of coverage or options you need, (for example, data graphing, immobilizer relearns, bi-directional controls) Then choose one that fits closest to your needs. Thanks for the question! Ryan Wilsing, Technical Instructor
@GoTechTraining
Жыл бұрын
The scan tool used in this video is a Autel Maxisys MS908S Elite
PROFICIENT Go Tech Ryan Wilsing My teacher Thanks for sharing it very helpful information video thank you Questions time please name the Scanner tools Take care and have a great Evening PROFICIENT Go Tech Ryan Wilsing From Nick Ayivor from London England UK 🇬🇧
@GoTechTraining
Жыл бұрын
Hi Nick, Thanks for tuning in! The scan tool used is a Autel Maxisys Elite Have a good evening as well! Ryan Wilsing, Technical Instructor
Fine subscribers getter. Video edited to hide all the details like a secret society.
What Autel scan tool are you using