Program Universal Remote to Craftsman Garage Door Opener | Garage Tec
garagetec.org/ richardson.garagetec.org/servi...
Жүктеу.....
Пікірлер: 33
@vernfrier1771 Жыл бұрын
Directions on my new remote were confusing. This video was short and easy. Thanks for not talking for 15 minutes before as many of these guys do. Very helpful and easy. Thanks much
@robagulia39217 ай бұрын
With paper instructions I spent 30 minutes trying to get it to work to no avail; with this KZread video in took me just over one minute….thank you!
@TheLifetraveler1 Жыл бұрын
Thank you I sat here a damn hour trying to figure out how to get this remote to open my Craftsman garage door opener I kept hitting the wrong button but watching your video I figured it out in less than 20 seconds.
@carlson.douglas.w6 ай бұрын
You are the man! I couldn't get it from the instructions it came with but i followed your video and got it programmed! Thank you!
@lupevalenzuela58183 жыл бұрын
This guy! Thank you so much, short and easy video.
@greggbernstein753422 күн бұрын
Great video. Concise and extremely helpful. Thank you so much.
@robinbroadwater2147Ай бұрын
Very kind of you to post this. Thank you.
@mehbutfair Жыл бұрын
I have a different remote but This still worked for me. Thank you.
@morrisjackson8904 Жыл бұрын
Thanks this was the best one easy simple to the point
@productstylistmarie6391 Жыл бұрын
Straight to the point, thankssss 🙌🏽🙌🏽
@JKKID35 ай бұрын
Finally, a video that worked. Thank you.
@zlorenson2 жыл бұрын
Much better than the instructions it came with. Thanks!
@LocoColombiano353 жыл бұрын
You’re the man thanks
@bodudas83462 жыл бұрын
excellent - thank you very much
@junchen15173 жыл бұрын
Thank you very much
@michaelwatts192 жыл бұрын
Good information
@THEJIG-IS-UP2 жыл бұрын
Fantastic
@kristaparkinsonshollywoodc31495 ай бұрын
AWESOME DUDE😊
@rosepolzin60014 ай бұрын
Thanks!
@shevinsacrey5862 Жыл бұрын
So much easier than the instructions. Thanks alot buddy!
@ieiteigetetoteyo80793 жыл бұрын
Not for me the yellow light stayed solid did the clicks & nothing any suggestion?
@kylrink3793 Жыл бұрын
Thansk for being like every single video out there.. just programming.. no videoa showing ypu how to install one..
@whiteboy129112 жыл бұрын
great job i got it and please try to go slower with the video happy hoildays to u and your family besafe always
@paulabryce8565 Жыл бұрын
What is the learn button? Mine only has 2 on the front.
@amsha10218 ай бұрын
Is there a learning button on sears model number 139.664300 to program new opener thank you
@darkblade28911 ай бұрын
What if your remote was previously programmed to a different garage door house and now u want to program it to your new house. How do u erase and reprogram it to your new garage door? Tried a lot of things but nothing works.
@roscoejenkins422128 күн бұрын
What are you clicking?
@alfredeneuman69662 ай бұрын
Where did you put in the code?!
@Bigjohndallas2 ай бұрын
Where is the learn button? Thanks
@-I-d-a-n-8 ай бұрын
עבודה יפה
@austindotwav Жыл бұрын
Each opener will have a different pairing color. Each color has a different amount of clicks on your remote: Yellow: 1 Purple: 2 Red/orange: 3 Green: 4
@United_HVAC_and_Fans4 жыл бұрын
That install is HORRIBLE!
@joemartin99629 ай бұрын
How can I program a lift master control to craftsman serial 139.5399011. I don't see a sticker that says about lift master. I'm not sure if I'm doing it right. Thank you.
Пікірлер: 33
Directions on my new remote were confusing. This video was short and easy. Thanks for not talking for 15 minutes before as many of these guys do. Very helpful and easy. Thanks much
With paper instructions I spent 30 minutes trying to get it to work to no avail; with this KZread video in took me just over one minute….thank you!
Thank you I sat here a damn hour trying to figure out how to get this remote to open my Craftsman garage door opener I kept hitting the wrong button but watching your video I figured it out in less than 20 seconds.
You are the man! I couldn't get it from the instructions it came with but i followed your video and got it programmed! Thank you!
This guy! Thank you so much, short and easy video.
Great video. Concise and extremely helpful. Thank you so much.
Very kind of you to post this. Thank you.
I have a different remote but This still worked for me. Thank you.
Thanks this was the best one easy simple to the point
Straight to the point, thankssss 🙌🏽🙌🏽
Finally, a video that worked. Thank you.
Much better than the instructions it came with. Thanks!
You’re the man thanks
excellent - thank you very much
Thank you very much
Good information
Fantastic
AWESOME DUDE😊
Thanks!
So much easier than the instructions. Thanks alot buddy!
Not for me the yellow light stayed solid did the clicks & nothing any suggestion?
Thansk for being like every single video out there.. just programming.. no videoa showing ypu how to install one..
great job i got it and please try to go slower with the video happy hoildays to u and your family besafe always
What is the learn button? Mine only has 2 on the front.
Is there a learning button on sears model number 139.664300 to program new opener thank you
What if your remote was previously programmed to a different garage door house and now u want to program it to your new house. How do u erase and reprogram it to your new garage door? Tried a lot of things but nothing works.
What are you clicking?
Where did you put in the code?!
Where is the learn button? Thanks
עבודה יפה
Each opener will have a different pairing color. Each color has a different amount of clicks on your remote: Yellow: 1 Purple: 2 Red/orange: 3 Green: 4
That install is HORRIBLE!
How can I program a lift master control to craftsman serial 139.5399011. I don't see a sticker that says about lift master. I'm not sure if I'm doing it right. Thank you.