I have just spent an hour fighting with an anaconda snake of epic strength. This stuff is rolled and put in a box. I let it set in sun on 90degree day in North Carolina. It is hard as a rock and will not straighten out. forms big curls that slap everything close. It will bend, but not straighten out. Bending it is very hard. Very hard. No heat needed is a joke. I am a 200lbs construction worker. Both friends helping me the same. After the first 3 feet we were covered in sweat and REALLY frustrated. Video shows guys in factory putting it on, and it is straight, but this comes to you in a 2 ft roll, which is rolled the opposite way of how it goes on. We twisted and pulled a lot. It will not stay until 2 people hold a short section on boat and third person puts in screws or rivet. It must go in box hot because it retains roll shape. Good quality. Should have taken an hr to install, but after an hour 3 ft is on boat and we at stern corner. That took a long heat gun experience and was still hard to get tight and straight. I'm a diy guy. This is way hard. I would have paid to have it done but what I saw online looked good, and easy. If you order this have lots of help. at least 3 heat guns and if it is cooler than 70degrees I wouldn't even try it. Manufacture, you are misrepresenting this product big time. Get a couple of guys and hand them this kit, then see what it's really like. Take a video of that and put on youtube. You won't sell many after that.

@tessilmare

2 жыл бұрын

please contact our US branch +1 954 463 5757

@tessilmare buongiorno.chiedo se sia opportuno scaldare il bottazzo in acqua bollente e accompagnare la stesura con la pistola ad aria calda.devo installarne 18 metri misura 52 mm.grazie

Che misura di viti consigliate?

@tessilmare

2 жыл бұрын

sul nostro sito può scaricare le istruzioni di montaggio

@lys3932

2 жыл бұрын

@@tessilmare Buongiorno, ho uno scafo di 4m, ma vedo che sotto il suo profilo parabordo c'e un dente su cui poggia e si fissa con 4 viti. Sarebbe possibile montare un parabordo del genere o dovrei cercare un altro modello?

@tessilmare

2 жыл бұрын

@@lys3932 Buongiorno, si chiamano profili a T, ne abbiamo ancora molti in produzione ma per praticità le suggeriamo di rivolgersi ad Osculati che ha tutte le misure anche in spezzonature piccole

@tessilmare

2 жыл бұрын

la misura della vite dipende dallo spessore della vetroresina e dal tipo di profilo che si monta