Only skilled people can do this work, the results are very beautiful 👍👍👍❤️

@constructiontech2411

5 ай бұрын

thank you very much

I think electricity line should be prepared first, and the colour of the ceiling could be painted first on the ground. We see excellent skill in this video.

@constructiontech2411

2 ай бұрын

thank you very much

@rava106

8 күн бұрын

Yes that’s true

I didn’t know they were out of USA but Thank you so much.

@constructiontech2411

Ай бұрын

thank you

Great job guys... from Kenyan gypsum designer

@constructiontech2411

8 ай бұрын

Thank you for watching the video💕💕💕

😂 Is this from the 1970's wires on your screwguns, sweet lord 😅. Battery guns lads

@constructiontech2411

Ай бұрын

Hello - nail gun, sir

@1Swahealy1

Ай бұрын

@@constructiontech2411 Nail gun? You got it all wrong 🤣. That's what I use to shoot down the track to the floor and ceiling. Screw gun screws in screws

tuyệt vời quá

@constructiontech2411

Ай бұрын

thank you

good job You mount the moldings to the plasterboard with some type of special tips, or they are the basic tips that are used to nail the tight covers of a door frame to the guides.

@constructiontech2411

5 ай бұрын

Thank you for watching and supporting the video

can you please tell me the size of that room ? i want to make similar design but i'm worried about the room space being too small for such design. Thanks in advanced 🙏

@constructiontech2411

23 күн бұрын

Hello - this room has dimensions of 3600x3400 mm, sir

This is dope...

Nice video

@constructiontech2411

2 ай бұрын

Thank you for watching the video🌺🌺❤️

you are really good workers

@constructiontech2411

2 ай бұрын

thank you for watching the video

You are a genius!

@constructiontech2411

2 ай бұрын

Thank you 🌺❤️

عمل جميل جداً ❤❤ تحياتي لكم من اليمن 🇾🇪❤❤❤

@constructiontech2411

7 ай бұрын

Thank you ❤️🙏

thợ thi công quá chuyên nghiệp

@constructiontech2411

Ай бұрын

cám ơn bạn đã xem và ủng hộ video

NICE AND GOOD

@constructiontech2411

9 күн бұрын

Thank you for watching the video

mantap bos ku. sukses selalu

@constructiontech2411

6 ай бұрын

thank you

Very nice

@constructiontech2411

9 күн бұрын

Thank you

I have question how are you guys doing this so easily? My arm gets really fatigued when holding the plaster board. I can never do this job properly, I always mess up

@constructiontech2411

Ай бұрын

thank you for watching the video

عمل جميل رائع جدا ❤❤

@constructiontech2411

8 ай бұрын

Thank you for watching the video

@AnastasiaLince

7 ай бұрын

Mmman

@user-fl5tk1jp1k

6 ай бұрын

😮

Great job

@constructiontech2411

Ай бұрын

thank you for watching the video

So nicely work and so fast

@constructiontech2411

2 ай бұрын

Hi 👋

@Imranvlogs0177

2 ай бұрын

@@constructiontech2411 hello sir

beautiful job!

@constructiontech2411

2 ай бұрын

Thank you for watching the video

Gypsum celing kitne sal thik se rahega bhaiya plz bataw

@constructiontech2411

Ай бұрын

नमस्ते - प्लास्टर की उम्र 20 साल होगी सर

Good job 💯👍👍

@constructiontech2411

Ай бұрын

Thank you very much

Beautiful❤❤❤❤

@constructiontech2411

3 ай бұрын

Thank you very much❤️❤️💕💕🙏🙏🙏

I think Room size is 12x15

How will an electrician fit the lights.

@constructiontech2411

6 ай бұрын

hi - they will run the wires over the light holes and the lights will be connected in series with each other

@1Swahealy1

Ай бұрын

Wires are usually hanging in place any ceiling Ive done and they fish them out after. Didn't see any hanging b4 they put this ceiling up. "Right lads boards off again"

عمل جميل ورائع جدا

@constructiontech2411

8 ай бұрын

thank you

❤❤❤❤

@constructiontech2411

9 күн бұрын

Thank you

Excellent job

@constructiontech2411

7 ай бұрын

Thank you for watching the video🙏

@knowledgehub258

7 ай бұрын

Good

Great job! 👏 If you guys do this as business, I want you to do this job for me and I’m in USA.

@constructiontech2411

2 ай бұрын

thank you for watching the video

@gojo6252

2 ай бұрын

You didn’t answer my question

@foolproof8416

Ай бұрын

@@gojo6252, I think they didn't read your whole comment or just doesn't speak English so they translated your first sentence and thought you were complementing them :) By the way I don't think getting visa to USA is easy so try doing yourself a bit practice and you can do it easly.

kalau kaya gitu cecek ,apider,capung pd betah kl ay mau ngerubah biar dirapatkan bisa g om itu sgt bgs tp kl dikamoungkua buat sarang tawon mkn nyaman kl sy mau moddel ini dirapatkan biar seranggak g od sembunyi

@constructiontech2411

2 ай бұрын

thank you for sharing

Did u use pop or wooden beading at the centre?

@constructiontech2411

8 ай бұрын

Thank you 🙏

good job

@constructiontech2411

6 ай бұрын

Thank you 🙏🌺🌺🌺🌺🌺

God jobs

@constructiontech2411

4 ай бұрын

Thank you for watching the video

Very focus noninterupted.

@constructiontech2411

2 ай бұрын

thank you for watching the video

I'm interested, from Nigeria

@constructiontech2411

Ай бұрын

thank you for watching the video

good job but ,check on those joints some are weak

@constructiontech2411

3 ай бұрын

Thank you for watching the video

good job... but i prefer without molding.... look it more simple

@constructiontech2411

5 ай бұрын

Thank you very much🙏

Great job guys. From the UK

@constructiontech2411

8 ай бұрын

Thank you ❤️❤️❤️❤️❤️

You forgot downlighters electrical wiring

@constructiontech2411

7 ай бұрын

Thank you - the electrician will wire and install light bulbs after the house is completed and put into use

Welcome. good job. Where are you from

@constructiontech2411

8 ай бұрын

Thank you for watching the video

10x10 fut room price same design please reply

@constructiontech2411

27 күн бұрын

4000 USD sir

Baru sebulan pakai udh roboh ini mah dmn letak kekuatanya

@constructiontech2411

Ай бұрын

thank you for watching the video

Good jop

@constructiontech2411

2 ай бұрын

Thank you for watching the video❤️❤️🙏

Alat untuk pasang lis itu necis tembak y

👍

@constructiontech2411

4 ай бұрын

Thank you for watching the video

Gypsum board ke upar kya apply kiya hai??? Kis cheez ka coating kiya jata hai???

@constructiontech2411

5 ай бұрын

Hello - plasterboard is made from gypsum powder and small mesh fibers - after completion it will be covered with a layer of paint to protect

🎉🎉🎉🎉🎉

@constructiontech2411

3 ай бұрын

Thank you for watching the video

Observe safety gears

@constructiontech2411

Ай бұрын

Thank you for watching the video

What are those brackets you installed onto the concrete?

@nurmastinspd1838

5 ай бұрын

😅mas; mmmmnnmmmmmmmm😅😅

@constructiontech2411

5 ай бұрын

Hello - that is a v-shaped zinc bar used to support plasterboard panels

@constructiontech2411

5 ай бұрын

thank you

I want learn well it.

@constructiontech2411

7 ай бұрын

thank you for watching the video

Hello my friend. What is the width of the side drop ceiling?

@constructiontech2411

7 ай бұрын

Hello - 600mm sir

super

@constructiontech2411

7 ай бұрын

Thank you 🙏

How can you install the lights?? And switch where you gonna insert the wires?

@constructiontech2411

Ай бұрын

Hello - the lights will be connected in series with one or two switches

@user-ev5rd5qq1z

Ай бұрын

@@constructiontech2411 thank you for your reply but how? They are already sealed where do you run the wires? I am planning to make my DIY ceiling like this,

Good job What's the name of that yellow aluminum you screw on the wall ?

@constructiontech2411

7 ай бұрын

Hello - those are thin zinc bars used to hang plasterboard

Mau tanya lur.. Untuk lis nya pakai lis apa yah.. Kayu apa gibsum

@constructiontech2411

Ай бұрын

Halo - Plafon ini seluruhnya terbuat dari plester pak

Should i go for gypsum or pop

@constructiontech2411

4 ай бұрын

thank you

coffin like design

@constructiontech2411

7 ай бұрын

Thank you for watching the video🙏

May I know how wide the wall angel is?

@constructiontech2411

4 ай бұрын

Hello - you want to ask the width of the 2nd ceiling level, right?

Hello I live in New York. Do you work in New York!!! I am willing to do a renovation in my home with your help please. Thank you. How can I get in contact with you??

@constructiontech2411

Ай бұрын

Hello - we are from Vietnam - thank you for watching the video

S'il-vous-plaît, le produit que vous appliquez diffère du mastic ?

@constructiontech2411

7 ай бұрын

Bonjour - ce produit est moulé à partir de poudre de plâtre

musiknya sangat mengganggu, biarkan dengan suara aslinya

@constructiontech2411

Ай бұрын

Terima kasih atas komentar Anda

Where did you buy crown Moulding?

@constructiontech2411

4 ай бұрын

Hello - we import these molds from China, sir

Can you training me this work

@constructiontech2411

2 ай бұрын

Thank you for watching the video

Woow

@constructiontech2411

3 ай бұрын

Thank you for watching the video

Boss may okay ba gamitin ang gypsum board pag gawa ng cove ceiling? Tingin ko kasi mas okay kasi di na kailangang mag grinder ng rebit pag ginamit ang hardiflex. Ang gypsum kasi black screw at medyo na lubog na ang ulo ng screw. Tama ba boss?

@constructiontech2411

27 күн бұрын

right - sir

Do you work in Kolkata, India ?

@constructiontech2411

4 ай бұрын

no sir

Be ready for termites on gypsum

@constructiontech2411

8 күн бұрын

thank you for watching the video

How to put the light bulb

@constructiontech2411

4 ай бұрын

Hello - the electrician will wire the bulbs in series and install the bulbs into the drilled holes

13:00 what is this and it's purpose?

@constructiontech2411

4 ай бұрын

Hello - this is a mixture of gypsum powder, sir

Very nice.. price???

@constructiontech2411

8 ай бұрын

Thank you for watching the video

Kitna kharcha aayega 10/12 me

@constructiontech2411

Ай бұрын

Halo - total biaya plafon plester ini adalah 700 USD

Inih dimana sayah mau pasang

@constructiontech2411

6 ай бұрын

thank you

info nya bahannya yg kyk papan

@constructiontech2411

5 ай бұрын

thank you

Would you come and work with me in dubai? I'm serious

@constructiontech2411

5 ай бұрын

Thank you - because of the remote location, we cannot come to work with you

@AksilSmail

2 ай бұрын

I can come to work with

@geaananda8247

Ай бұрын

Saya juga bisa bekerja seperti ini

@Amine31Yahyaoui

Ай бұрын

I can make all this with plaster and vegetables fiber

10130

@constructiontech2411

7 ай бұрын

Thank you ❤️

15×12 ke room me Kitna kharcha aa jaygo

@constructiontech2411

4 ай бұрын

Hello - the cost to make a bedroom like in our country Vietnam is 300 USD, sir ​

@funyvedio7777

12 күн бұрын

@@constructiontech2411 INDIA

Please if you want learn how will I contact you?

@constructiontech2411

27 күн бұрын

thank you

عمل جميل ورائع جدا

@constructiontech2411

2 ай бұрын

Thank you for watching the video🙏💕