✅ How to make metal frames for drywall ceilings 🔥 Suspended with double structure 🤜 silent block
✅ How to Make a Curved Drywall Partition 👉 with Metal Studs
• ✅ How to Make a Curved...
What are plasterboard ceilings?
Pladur ceilings are linings under the slabs or horizontal elements made up of metal profiles. They are intended to hide installations and decorate enclosures. They provide fire resistance, improve acoustic and thermal insulation.
There are semi-direct, suspended and without hanging.
Semi-direct ceilings are formed by a structure of galvanized steel sheet profiles based on masters, anchored directly to the slab, to whose external side one or more Pladur plates are screwed.
Suspended ceilings can be formed by a structure of galvanized steel sheet profiles properly suspended from the floor by different types of hangers, and supported on profiles mechanically fixed around the entire perimeter.
They can also be formed by a double structure, primary and secondary, positioned at the same or different levels.
When it is at the same level, the primary structure is suspended from the floor by means of hangers and the secondary is attached to the primary with crossing accessories, both supported by profiles fixed around the entire perimeter.
When it is at a different level, the primary structure is also suspended from the floor by means of hangers and the secondary structure is properly suspended from the primary by means of clamps and supported on the perimeter of the perimeter profile.
The ceilings without hangers are made up of a single structure of studs properly supported on the lateral support walls, by means of channels and fixed around the entire perimeter.
Пікірлер: 221
Full professional. Working solo without getting sweat.
Me encantan tus videos, pero solo a modo de comentario, podría haber un audio que indique los materiales y las piezas que estas usando. Muchas gracias por enseñar
Well done great tutorial!!!
Well done, great workmanship 👍
Can you tell me where you got the fasteners and hangers? Or a link? Thanks.
Me parecen una pasada tus videos. Estoy a punto de empezar una instalación de pladur de paredes y techo en mi casa por primera vez y este video es de 10! Aunque tengo una pregunta ¿ Las orquillas de anclaje han de ir obligatoriamente sobre vigas? Las mías son de acero, se pueden poder ahi o es indiferente?
What are those parts called? Planning to do some renovation :)
Very good job i like watch your vidéos i have just a question where have you bay your green thing thats your place on your structure for know thats you have thé good level wenn you use your laser ?
Muy buen video!! Soy de Perú y no tenemos tantos accesorios de fijación como los que veo... tenemos perfil parante 89, 64 y 38; perfil riel 90, 65 y 39 (ambos perfiles en 0,45mm y 0,90mm); perfil Omega, esquineros de metal y PVC, cinta papel, cinta malla, plancha yeso 5/8" 1/2", 3/8, 7mm. si me falta mencionar uno, pues me retractan pero sí que falta importar (por lo menos) más accesorios para no hacer tantas maravillas con lo que tenemos. Abrazos!
Быстро работаешь, даже чаю не успел попить!😁
@TheMadManofDRYWALL
Жыл бұрын
🤣
excelente video muchisimas gracias por tomarte el trabajo de enseñar :-) !!!
拍攝非常的清楚及仔細,感謝您
@TheMadManofDRYWALL
Жыл бұрын
Muchísimas gracias ☺️
Como haces con la instalación de los focos?
What is the name for that hangers? Do you know where I can buy them?
Bom dia amigo, paguei um profissional para fazer o meu forro de dhaoll e os trilhos da Lage onde ele parafusou os suporte trincaram todos. É normal isso? Tem risco da Lage cair?
Whats the material that u use as the tracks called? I plan to do the same drop ceiling in a building.
Impresionante. Tremenda enseñanza 👏🏾 👌🏽 👍🏾 Una destreza adquirida con la experiencia del trabajar a diario Like
Do you devide the space first with walls and then you add the lowered ceiling? Or do you make the lowered ceiling first and then divide the space with walls that anker to the lowered ceiling?
@peterkral4660
Жыл бұрын
you should divide the space first, or the sound would easy tranfer to other room via lowered ceiling
Bravo vous a la auteur numéro un merci
Gostei deste trabalho
Good job 👍
Nice work
Thank you for your 13 minutes
Amazing thanks
what hanger or clippers did you use?
Olá, boa noite. Gostaria de saber o motivo de usar esta estrutura dupla? Aqui não costumamos ver desta forma, apenas com a primeira estrutura.
Добрый день. А какая подвесная система использовалась? Спасибо.
Hi what is the off the connections that you use to connect everything without screws?
Exelent job but I have watched how the Knauf instructor is explaining that is not good practise to use UD-profile to fastend the screws and attached the board, instead, it should be one more CD-profile 15cm from the wall and screws trough him.
Gostei muito
You started completely wrong. The diatance from the wall to the first profile, on both layers, is too big. You should have started from maximum 20cm from the wall
Is this a 18v screwdriver what you use?
Привет друг, не крепи к направляющему профилю пн 28×27 листы шурупам. В остальном отличная работа. Еще я использовал быстрозажимные струбцины для временной фиксации листов к каркасу, а теперь купил подьемник для листов гипсокартона, с ним проще. Есть в сети видео о том как сделать такой подьемник самостоятельно, потрать время и облегчи свой труд, не пожалеешь
Gracias mi amigo
Thanks
Зачем два ряда направляющих если лист крепится к одному? Сразу к профилю на подвесах почему не закрепиться?
Can I ask which brand system your using there please?
Très bonne job merci le jeuine
thank you brave homme man , good work ...STAR for you ........./
Here in the philippines they rivet the frame into the cement (wall or ceiling) I know it is substandard procedure but as a worker I don't have a choice if that is the only materials the owner and my boss provide to me and also instructed to do. LOL but yea those dumb thing i will never do in abroad
@josephdelacroix8871
10 ай бұрын
Anybody cares how they do in Philippines. Pinay
Are the ceiling concrete beams reinforced? If so, is it safe to drill into them as you have? Thanks.
@noonstar5173
Жыл бұрын
it is FORBIDDEN to do that...
gracias por compartir
Name of all materials used, please?
Ésto en argentina será el equivalente al sistema flotante de Kanuf??
Super ❤
Que buen trabajo
What kind of screw did you use?
God work
What are the name of materials do you used
Wondering if this could hold some thin rockwool for an extra insulation
@TheNetRiper
5 ай бұрын
Yes.
Good job. But we don't fix plasterboard to wall profile.
What your shooting, it's very careful and measure
Gostaria que me ensinem como fazer bem sancas de Pladur!
salut comment il tient au mur ton support laser stp ?
OMG, you should have 2 lasers to avoid the old fashioned tape measure usage. :-)
Which laser level do you use here?
Can you give the metal frame distances that you prefer for the metal frame with insulation 7cm mineral wool please.
Hola soy de México como se llaman esas grapas y las anclas que puso en la loza y donde puedo comprar gracias
Que numero de broca husas amigo cual es la correcta disculpa
good job.
You can me my the device you use for measurement please
Bravo
El legal eso de taladrar viguetas, según tengo entendido las viguetas se apoyan sobre las vigas y son un elemento que trabaja soportando esfuerzos sobretodo por la parte inferior que trabaja a tracción, y es donde más acero llevará, si en un taladro agujereas una varilla de acero estás restando vida a la vigueta y comprometiendo la resistencia de esta, pudiendo hacer que se desplome el piso de arriba, probablemente a corto plazo no ocurra nada, pero con el paso del tiempo si queda algún acero taladrado sin su recubrimiento de hormigón se pueden dar problemas de aluminosis y a saber que más. La única respuesta que explique que lo que haces en el vídeo sea legal, es que el ingeniero haya diseñado las viguetas y no sean pretensadas, y que haya pensado dejar un recubrimiento de hormigón por la parte inferior superior al recubrimiento mínimo calculado para poder taladrar sin llegar al acero.
@andres3567
Жыл бұрын
Por lo que me ha comentado algún pladurista, están obligados por normativa a anclar a las viguetas. Debo recalcar que ninguno tenía formación en ingeniería civil y mucho menos estructural. Quizá incluso hablaban por hablar, ya que el gremio está lleno de piratas que creen que saben, pero a la hora de la verdad rompen más que arreglan. Personalmente, no me convence nada el sistema, justo por lo mismo que comentas, especialmente cuando estoy viendo estos videos, en busca de información para instalar el techo en un edificio construido en los años sesenta. Tampoco me gustan esos tacos, aunque esto sea más una cuestión de preferencia personal. En otros videos no buscan las viguetas y tiran de taco de expansión fischer, así que creo que me decantaré por eso o bien meteré tacos basculantes a la bovedilla y a correr.
@poqservicios642
10 ай бұрын
Hola, creo que las viguetas básicamente son funcionales para armar la carpeta con hierros que va por encima, luego de un mes de fraguado, esto se soporta por si mismo sobre las vigas. Por lo que luego de este mes, agujerear las viguetas no tendría que presentar problemas. Saludos
How to get this light ?
Very good
Gracias.
@TheMadManofDRYWALL
Жыл бұрын
Gracias
deberias haber puestp que materia vas utilizando ...pero bueno bien
Number one 💪
@TheMadManofDRYWALL
Жыл бұрын
Muchísimas gracias ☺️
Профессионал своего дела 👍👍👍
@skiff842
8 ай бұрын
По российским меркам обычный гипсохалтуршик ☝️😅
What's the name of the threaded iron imbeded in the slab?
@kazielbonn
Жыл бұрын
Would love to know this too
Where are u from
Show... 🔝 🔝 🔝🇧🇷
alguien sabe como se llaman las cosas con las que fija las canaletas?? que hacen como un Clip cada que las une??
Very fast work
สุดยอด❤❤❤
good
Thinking of trunking...
Bonjour, laser huepar ? Si oui qu'en pensez-vous svp ? Merci
Hi bro I am gypsum carpenter where r u from I am Indian
Перф бери побольше для потолка! А то вообще не уставший будешь!
Good
Nice
Подвесы конечно огонь не то что у нас
la fixation dans les poutrelles est interdite sinon pas mal le système
Сорян братан - стыки между листами должны быть на профиле cd а у тебя они где попало! И каркас как дрышля ходит при нажатии.
Na Slovensku a okolitých štátoch nesmieš srobovat do ud profilu ked mas dvojitu konstrukciu. Pridáva sa cd profil vedľa ud. Aj keď veľa ludi to tak robi do ud
@TheMadManofDRYWALL
Жыл бұрын
Todo depende claramente de las normas del país y del proyecto. Uno se rije por el proyecto del arquitecto
@sadrokartonvlado
Жыл бұрын
@@TheMadManofDRYWALL zaujímavé že každá krajina má svoje pravidlá a aj sadrokarton je rozdielny. Človek by povedal ze všade sa to bude robiť rovnako
Great work
Халтура блин, все швы потрескаются. Так делать нельзя!
I am from India what is the name of your Light marker Please tell me
@terrynorton3182
2 ай бұрын
Laser self leveling. Bosch, Makita, DeWalt, they all do them.
Les boulons au plafond ne sont pas conforme dans les poutrelles.
Ist das Verschrauben der GK-Platten in die UW-Profile zulässig? Ich dächte, die Scheibe muss frei schwimmend sein, um Spannungsrisse zu vermeiden.
@nikolamaric588
9 ай бұрын
laut knauf solte man nich in die ud profile svhrauben ud(ecke) uw(and)
is goooodd
Great thanks!.
Бауырым сендегі қабырға кесек па? Бұл 1 2ші сенің шығының көптеу екен деректаратпен тарта салудың орнына масқара😮
senza alzalastre....geniale azzz io ho fatto una fatica tremenda,prossimo lavoro rigorosamente con i tuo metodo)(alzalastre a noleggio 50 euro al giorno....)
Металлический каркас делается из профиля, а не из гипсокартона.... поправь название...
Как-то он эти листы слишком легко поднимает, это по ходу не гипсокартон, а что-то полегче.
I have a sloped ceiling which is made of non-solid and unstable material, is it possible to make a plaster ceiling that is not supported by the ceiling?
@jesseycoolen4169
Жыл бұрын
Support the new ceiling with the walls and add some more horizontals. If it's a sloped ceiling I don't think it's a very big room right?
bonjour , merci pour cette video qui me donne une bonne idée pour mes combles mais je voudrais savoir comment s'appel la pièce qui assemble les 2 fourrures ?
@yannisyoussef7602
8 ай бұрын
Bonjour, ça s’appelle une suspente acoustique le modèle qu’il utilise. Si vous êtes en France, vous pouvez le trouver à Leroy Merlin mais ils sont assez chers. Il est possible d’utiliser à la place des cavaliers pivots, qui ont la même forme et la même fonction.
@renangifal2971
7 ай бұрын
Idem, impossible de trouver cette pièce...
На потолок растояние между профилями 400,а не 600! На стенах, да 600.Стыки под 45° не делал.это легче на земле делать.шпаклевать не будешь?