Did not expect that much gains might have to buy this exhaust system

Sounds awesome 💪

That sounds really good!

Is that a sports cat on the manifold. That’s something that would take away any harsh high pitched sound so a great idea

very nice system. im considering the tegiwa x milltek on fn2. could you please make same kind of review of it soon thanks a lot!

@tegiwa

Жыл бұрын

Hi, we're in the process of filming the FN2 system, stay tuned!

🔥🔥🔥🔥🔥

What is the db reading for this compared to the Tegiwa cat back? Need to get into Thruxton with 90db limit.

Nice! can make more unboxing video?🤩

@tegiwa

2 жыл бұрын

Check out more of our unboxings here: kzread.info/head/PL7ViUcRjxo24bZPmH_nKr7FXiz6FEHD8g

Quality

Was that a sports cat on the manifold?

Looks like a piper manifold with sports cat.

Do you guys have a discount code at the moment?

Sounds nice i need something to replace the spoon N1 catback i have on at the moment its loud even with the bung. Any reason why its over £200 more on the website a year later

@tegiwa

Жыл бұрын

Unfortunately with todays climate the cost of manufacturing, materials and shipping has gone up, so we have to match them increases accordingly.

Will this fit on a honda civic ev1?? with the k20a3 engine

Is this a full stainless steel system?

only just bought ur last one lol

Were there any dB readings done for the standard car by way of comparison or did I miss it somewhere in the video?

@roy9924

2 жыл бұрын

In my Registration (Germany) it says the Standard is 91dB

@tegiwa

2 жыл бұрын

We didn't conduct any dB tests for the stock system, but with the Tegiwa Manifold and OEM system it still gave a raspy note.

Good gains. How much power would it make with a tune?

@roy9924

2 жыл бұрын

Here in Germany the most are making 230hp after a tune (with Mani, Cat, catback and Hondata airbox)

@tegiwa

2 жыл бұрын

We haven't yet mapped the car with this system, however you can see with this test car the non-mapped power run has gained a decent 17BHP. So, i could imagine with the correct map it could get more gains.

@geohudson2125

2 жыл бұрын

@@tegiwa is that power 211HP on standard k20 ecu 📥📈 ?

Getting an ep3 soon this will probably be my first mod, will I need a re map fitting this exhaust and the tegiwa cold air intake?

@tegiwa

2 жыл бұрын

That's great to hear! No you won't need a remap.

What about drone noise inside the car? And how does the in car noise compare with your 3" Tegiwa catback?

@tegiwa

Жыл бұрын

There is minimal drone at 60-70mph in 6th gear. You can hear the Tegiwa system here: kzread.info/dash/bejne/X5l-w6tpctTUkbA.html&ab_channel=Tegiwa

how does this compare to ur tegiwa 70mm much difference? or nay

@tegiwa

2 жыл бұрын

The Tegiwa system features a 70mm pipework from the manifold back and increases to 87.5mm in the tailpipe, compared to the Tegiwa X Milltek which is 3" / 76mm. You can see performance gains of around 5-6BHP over the standard un-mapped system. Sound example here - kzread.info/dash/bejne/iXuf3JJmcdyfqps.html&ab_channel=K20_ep3_typeR Hope that helps!

Is this exhaust system suitable for driving on normal roads without getting pulled over for high db?

@nsagoogle9581

Ай бұрын

Yes

Do you need a db killer in the neighbourhood ?

Do you guys recommend using exhaust paste when installing this as its a slip fit or is it designed in a way to not need it?

@tegiwa

2 жыл бұрын

You don't need exhaust paste when fitting this system. All the hardware you need is provided.

@JordzyBrev

2 жыл бұрын

Car needs mapping when you change the inlet manifold, thottle body, exhaust decat manifold and cams

Is there a twin exit exhaust like the stock one?

@tegiwa

2 жыл бұрын

We don't have another exhaust tip available for this system however we are looking into it.

Does it Pair up with stock headers aswell?

@tegiwa

2 жыл бұрын

Yes this will mate up to stock manifolds.

Will these be coming back into stock?

@tegiwa

2 жыл бұрын

Hi, these will be back in stock early next week!

Is the Tegiwa x Milltek 76mm compatible with the EDM Civic Type R EP3?

@tegiwa

Жыл бұрын

Hi, yes they’re compatible with the EDM Civics.

@TheOwnerOfYou

Жыл бұрын

@@tegiwa Thank you for the info!

3 questions regarding the exhaust : 1 - The center pipe seems to be pretty low.. I guess if I lowered the car by 35mm the center pipe will touch at every speedbumps ? 2 - The exhaust is shaking under hard acceleration, is it touching the subframe (commons issues after installing header + bigger exhaust on EP3) ? 3 - Any idea if we can get in the future dual tips exhaust like the original one ?

@tegiwa

Жыл бұрын

Hi, This exhaust was a prototype at the time of filming. It has now had a revision which prevents it shaking as much as it does within this video. With the car being lowered you will expect it to slightly knock over bumps as per with any aftermarket system and I can confirm it doesn't knock against the subframe. If you need further assistance then please contact websales via email or phone call - websales@tegiwaimports.com // 01782 33 44 40 Thanks!

That cars change over sounds far to smooth for stock 🤔

which headunit is that plse ?

@tegiwa

2 жыл бұрын

Pioneer SPH-DA130DAB

Can we have an fn2 vid?

@tegiwa

Жыл бұрын

Already in the works!😉

Was this car mapped?

@tegiwa

2 жыл бұрын

No it wasn't mapped - Only a power run

Its full inox ?

@tegiwa

Жыл бұрын

Hi, all Milltek systems are made of T304L stainless-steel.

Do u have to weld it?

@tegiwa

Жыл бұрын

Hi, no welding required.

@_c_y_t

Жыл бұрын

@@tegiwa how much would it cost to ship to the U.S? Minnesota

@tegiwa

Жыл бұрын

@@_c_y_t Hi, the shipping is calculated at checkout automatically before payment. -www.tegiwaimports.com/tegiwa-x-milltek-sport-catback-race-exhaust-system-3in-76mm-honda-civic-type-r-ep3-01-05.html

Want

@tegiwa

2 жыл бұрын

www.tegiwaimports.com/tegiwa-x-milltek-sport-catback-race-exhaust-system-3in-76mm-honda-civic-type-r-ep3-01-05.html 😉

@driventofightuk

2 жыл бұрын

Oh it's already in my basket just waiting for funds🤣