The faster the setup and tear down the better, plus the space saving makes them a no brainer.

@lavishlifedjs

Жыл бұрын

Word

I said this before, and I will say it again you, my friend are always making the best videos! You are so helpful to the Dj community. You have no idea. Thank you again for a wonderful video. You are always making me strive to be a better DJ thank you Dj Peck.

@lavishlifedjs

Жыл бұрын

Appreciate it bro 🙏🏾

Great review! I think Rockville is doing themselves a disservice by not collaborating with KZreadrs. I had noooo idea that this was even a thing, I almost just bought another RTP 32 without even knowing that there was a newer more compact model

@lavishlifedjs

4 ай бұрын

Daryl ! What’s up bro. Fan of your page. You should do a review on it too ! I agree with you though !

I do have two of them for five or six months already and I assemble and disasamble them on site. Takes about five minutes. Not so bad. The carry bads are OK but do not push the zippers to hard. I have the room in the Honda Odysey to carry them assembled but the bags are convenient. I really like the look. My speaker stands (8) are on sales. Je regarde continuellement tes vidéo. Merci de donner un élan de classe à notre profession.

@lavishlifedjs

Жыл бұрын

Thank you 🙏🏾

2:03… solid video at this point (when you offered up the comparison to the prior model). Now one has clarity in making the right decision on which to buy. THumbs UP! 👍

@lavishlifedjs

7 ай бұрын

Thank you

I love my Rockville totems too.

@lavishlifedjs

Жыл бұрын

They are great

I just ordered a set of these for my white setup. Your awesome video here was a big factor in my decision. Thanks a lot! Lol

@lavishlifedjs

Жыл бұрын

My pleasure. I take these to my gigs fully assembled. Definitely save a lot of time.

@DJ2Legit007

Жыл бұрын

@lavishlifeeventsdjpeck I'll be using them for the first time at a wedding on Monday May 15th and that's my plan to take them fully assembled. I'll be sure to post a gig log on it. Thanks again!

@lavishlifedjs

Жыл бұрын

Gotta check that out when it comes out

You a whole vibe man 😂 … keep It up!

@lavishlifedjs

Жыл бұрын

Appreciate it 🙏🏾🙏🏾

Just copped! Will go perfect with my pan lights underneath and upgraded dj booth

@lavishlifedjs

Жыл бұрын

yessir...these are very practical

Ay bro you living on the edge flipping that knife at the beginning 😂😅😅 I see you 👏🏼

@lavishlifedjs

Жыл бұрын

Living on the edge my friend…or just a video edit

@MrMaui38

Жыл бұрын

@@lavishlifedjs 🤯🤯

I have global trusses, but definitely going to check these out for the smaller to mid-size gigs. thanks for the review.

@lavishlifedjs

Жыл бұрын

For sure…these seemed to built a little better as well 🙏🏾

You inspired me to grab 4 of these. Love them. I'm going to rock them like my boy DJ Peck and use the wash hex lights. Now I just gotta get as good at mixing as DJ Peck!!! Inspiration!

@lavishlifedjs

Жыл бұрын

My pleasure my guy…you got this 👍🏾

I have a truck but since the original ones don't fit inside when I had to load everything inside due to rain, I would put them in the back and cover them with trash bags. This is definitely something I will look into.

@lavishlifedjs

Жыл бұрын

For sure…these are a lot more mobile Dj friendly

Just got mine!

@lavishlifedjs

Жыл бұрын

Nice…how you like them ?

NICE!

@lavishlifedjs

Жыл бұрын

Thanks for checking in my dude 🙏🏾

Awesome video Dj.. These are great for mobile djs if you don’t have a box truck to tote around Truss pieces. 😂

@lavishlifedjs

Жыл бұрын

Thanks…exactly, throw it in the sedan

I bought the large ones for speakers, ima buy 2 of these for my lights

Thank you for sharing. I hope the set up and breakdown is quick?

@lavishlifedjs

10 ай бұрын

My pleasure…yes it’s very quick

Dope

@lavishlifedjs

11 күн бұрын

Thanks 🙏🏾

That is a game changer! I'm gonna have to check those out! I would love for you to do a video of how you load your van. Do you take any seats out?

@lavishlifedjs

Жыл бұрын

Not a bad idea Ray. This van has a “stow n go” feature where the seats fold in to the the floor…one of the reasons I got it

I have to assemble the kit I bought the 2 Rockville totems the box says 150lbs probly because it's steel vs aluminum. Would be putting 2 u-king 24 led bars on the legs using adj clamps.

@lavishlifedjs

Жыл бұрын

That’s going to look dope

Thanks for this video. Ive been going back and forth about getting the RTP-32 vs RTP-GO. After looking at this video I am leaning to the RTP-GO. But in the video, when you extended the RTP-GO, the top base plate doesnt look level. It looks a little slanted. I wanted to know if that is a defect in the product, or was it just not screwed down tight enough to make it lavel. Thanks for any feedback.

Hi Peck I am trying to see if I can have one of these RTPGO fit in my suitcase flying back to europe. What is the length of the feet once disassembled? Description says 31.5 but I think thats the total length boxed when buying it new

@lavishlifedjs

7 ай бұрын

Not sure if you travelled back yet but I believe they are true to size

I just bought a pair of the novo pro ps1 xl. If Rockville stuff was easy to get in Canada I’d have bought these. I love the novo pro tho. I’m always looking for more gear to buy.

@lavishlifedjs

Жыл бұрын

Gear acquisition syndrome…I have it too…more gear more fun :)

@djjamie84

Жыл бұрын

@@lavishlifedjs I also just bought a 8 Betopper LM108 moving head Wash lights. So will definitely need another 6 Novopro stands

I made the lavish Booth and I used the rtp-go because I'm shorter

@lavishlifedjs

Жыл бұрын

Nice…would love to see what it looks like

@djpalacios5388

Жыл бұрын

@@lavishlifedjs I'll try to upload it to my channel

Hey that look great but cannot be shipped in France ! Nice one !

@lavishlifedjs

Жыл бұрын

Damn…maybe they will get it there eventually

Can you share a video on how to wire totems for moving heads nice and tidy? I can't seem to find any video on KZread about this. Mine takes ages to do when setting up

@lavishlifedjs

10 ай бұрын

Hmm...not sure if I'm the guy lol...my totems could be wired much better

What is the height difference between the rtp go and the rtp 32 at the lowest heights? Rockville claims they are both 39” but there is a difference in your video for sure. Thanks for your videos.

@lavishlifedjs

9 ай бұрын

I haven't measured but at the lowest height there is for sure a difference and what makes it possible to put it in a sedan.

Peck! I’m looking into totems now for my Lavish booth and wanted to get your opinion. Does this RTP Go set up at a good height for mounting the booth on it? Or do you use the RTP32W for that? Online it says 39” at it’s lowest, which would be a great height but I’m wondering mostly because the Go looks a lot shorter than the totem you’re comparing it to in the vid. Thanks for the advice as always!!

@lavishlifedjs

11 ай бұрын

I've used both and they are basically the same. The GOs are definitely adjustable to the height you need, more so than the RTP32W because they can go lower...it's very flexible

@MrMaui38

11 ай бұрын

@@lavishlifedjs thank you for the reply my man. That’s great to know! I will probably go with the RTP Go then, that portability factor is awesome. Thank you for making this video!

Thanks for the video seriously considering these how high do they get once fully extend it. Do you feel this is tall enough? Also, how do you connect or sit your moving head on the totem so they don’t slide off or fall. Thanks

@lavishlifedjs

10 ай бұрын

George ! How are doing my good sir....these get as high as the original versions (tall enough in my opinion)...There is a hole in the center to attach any fixtures + it comes with an attachment

@georgethedj4946

10 ай бұрын

@@lavishlifedjs Doing well buddy. Hey, sounds like an option possibly for me. Love the ability to transport assembled. Keep rocking boss. 😎

Are these more stable than the old ones? I see a side horizontal bar the old unit does NOT have.

@lavishlifedjs

6 ай бұрын

Because of the multiple joints, these feel slightly less stable but still functional

How well do they work with the wash fx hex lights on the totem weight wise

@lavishlifedjs

9 ай бұрын

Very well, use them all the time on these totems

Nice economical product if being used for office display of small movers, small events, and if transported assembled (which defeats the space saving purpose). One of my guys bought a pair. Not ideal for screens or regular sized movers. A rocking dance floor will have these swaying and have you nervous if you put a screen or mover on them. Space saving? YES, Time efficient? Definitely NOT. If you have to build & collapse this thing at the gig, give yourself extra time. Cool telescoping, size adjusting stand but I wouldn't recommend it for professional use.

@lavishlifedjs

Жыл бұрын

Love this point of view and thanks for sharing. 🙏🏾

Is this what you use for your DJ booth base? Could I get away with just one as my DJ booth base?

@lavishlifedjs

Жыл бұрын

Yes. I had the original one. If you are shorter than me then you would need this guy as it goes down a little further.

What is the height fully collapsed?

Do you keep that light stick on it, or wash that for video purposes

@lavishlifedjs

Жыл бұрын

Video purposes but I may try it p

What's the difference between rtp32 and rtpgo? They look exactly the same? I just ordered a set of the rtp32. Did I mess up?

@lavishlifedjs

Жыл бұрын

You did not mess up. There have been a few improvements to make it more mobile Dj friendly. Mainly, imho, it’s more compact/shorter when fully assembled which makes it much better and easier to transport in that form (this will save a ton of time not having to set up ). The other things are the base is separated in to 2 pieces, the components have changed as well and are built better. I had and used the original one for 4 years and have no complaints. You will be happy either way.

@billpatterson9361

Жыл бұрын

@@lavishlifedjs I appreciate your quick reply. So many never respond. Love your videos. Thanks for all you do for the DJ community!

The ones I got are heavy carbon steel.

@lavishlifedjs

Жыл бұрын

The RTP Go ?

@brianberrydj3659

Жыл бұрын

@@lavishlifedjs ,not sure if that is the same model.

Hey Peck, are u still using these and how have u liked them?

@lavishlifedjs

8 ай бұрын

Yes sir…I’ve used them always every weekend since posting the video…going strong I use on these for my totem stand for my booth BTW, love that gigbar mod using the washes

@djdannybhtx

8 ай бұрын

@@lavishlifedjs awesome! I’ll be ordering these this weekend! Im selling my Novopros because man they are too big and heavy! Thank you for watching the video my friend!

What's the height on them when you extend them?

@lavishlifedjs

10 ай бұрын

They get as high as the original version...definitely high enough..stats should be on their website

What you do with ur old ones

@lavishlifedjs

Жыл бұрын

Still got em…bigger rooms I might run 4

how stable compared to your originals? I have the original ones too

@lavishlifedjs

Жыл бұрын

Pretty stable for my usage…this actually feel like a better build than the last one

@StevieRayEntertainme

Жыл бұрын

@@lavishlifedjs TY. Some day, I want to come be a roadie for one of your Weddings. Give wife hands a night off.

@lavishlifedjs

Жыл бұрын

@@StevieRayEntertainme good luck getting wife hands to not work :)

Whats the difference between the old one and this one

@gerrydelaet

Жыл бұрын

As far as I can see: 1) bottom plate split in 2 2) there are no longer fixed screwing points on the base plates, the bolts go straight through the whole plate which makes it much stronger. On my totems all fixed screwing points broke off so I had to replace them all with bolts.

@lavishlifedjs

Жыл бұрын

@@gerrydelaet yep and most important I think, it’s much shorter fully assembled

@djkb9596

9 ай бұрын

​@@gerrydelaetwich totems are you using now,and wich one would you recommend for sturdyness

@gerrydelaet

9 ай бұрын

@@djkb9596 , I use the Novopro PS1XXL which are a copy of the original Rockville totems. I would go for the RTP-GO , only problem for me is that delivery from USA to Belgium costs as much as a set of 2 totems....

are they less than 10lbs?

@lavishlifedjs

Жыл бұрын

I wish

@oldschooldjernie

Жыл бұрын

@@lavishlifedjs its a nice system no doubt and takes much less room than a conventional, but when you get over 30, your back wont like it

@oldschooldjernie

Жыл бұрын

I think I will stick with speaker tripods I can bring four to one of those totems. But they look better but I'm more into function than looks. Peace

what is the model of your minivan?

@lavishlifedjs

Жыл бұрын

Chrysler Pacifica…the ultimate dad Dj mobile mobile 😜

@neonhills

Жыл бұрын

@@lavishlifedjs how long have you had it, what is the year of the model ? And if you can mention any other cars that are good buys for mobile DJs like us... i'm looking to upgrade from my hatchback Toyota Yaris to something that will allow me to bring more gear and do still have room to take an assistant with me.

@lavishlifedjs

Жыл бұрын

I’ve had my van for about 3 years now. The best part is that ALL the seats fold flat in the ground essentially turning it in to a cargo van.

@gaffle7646

7 ай бұрын

My wife had the 2017 Pacific and later got the 2020 Pacific. I totted 2 BassBoss SSP118s, 2 BassBoss DV12s, facade, table, bags, controller, uplights, and a few other things all in one haul. It was loaded but did quite well.

doesn't seems too stable... maybe usefull for static lights or low-weight/size moving heads

@lavishlifedjs

Жыл бұрын

Pretty stable, the base is weighty…I’ve used it for moving heads with no problem

@gaffle7646

7 ай бұрын

@@lavishlifedjsWhat’s the max weight over a mover you’d put on this at around 6.5’? I’m debating on getting Chauvet Intimidator Hybrid 140SRs and would put them on these.