Well, the casing needed to be made with an exit for the vacuum cleaner!

@xConundrumx

10 күн бұрын

that plus the drive roller is on the wrong side, or better there should be one on each side.

@charlesemmer8856

5 күн бұрын

@@xConundrumx I think if you do that the brush motor direction should be reversed as well.

Now you need a rust-dust removal machine. Better get building one!

@luismlc89

28 күн бұрын

A big one!!!!

@thorstenhulser5008

27 күн бұрын

Project 0149 coming!

Can you please tell your camera man that not EVERY shot needs to be done with a moving camera? The whole video has a nervous appearance. This is not an action movie! (same goes for the music btw)

@ramentaryramblings

23 күн бұрын

looks fine to me

@richfmatos

22 күн бұрын

Moving camera may cause disconcentration, please just use it to improve the techinical view of object. And it is terrible for viewing in double velocity. Thanks, and dont stop the projects!

@jerrypease

19 күн бұрын

A nervous appearance? FFS, it's a sad world when a man has anxiety while watching men do men shit and they get nervous because of how the camera moves. Go watch something about unicorns and rainbows if you can't handle it.

@martinlangosz9508

17 күн бұрын

Jep 10 seconds into the clip and i know exactly what you mean

@aircraftangan

14 күн бұрын

yeah maybe the cameraman can use a motorized slider or dolly track tripod .. it can give more stability ada better to watch ❤ , i love all ur videos anyway ! from Malaysia ❤❤🎉🎉

Yum, flying rust particles

@westlander87

28 күн бұрын

My thoughts exactly.

@timothydalton90

28 күн бұрын

Womp womp

@alexandres8846

28 күн бұрын

dust collector.

@kirkyd123

28 күн бұрын

Sorry, can't talk. My lungs are full.

@thespiderkelly9589

28 күн бұрын

It's iron, relax, our bodies can handle it...not as if its silica...🙄

Следующее видео: вытяжка для этого станка. А так классная работа👍

That’s one way to create a firestorm in the comment section. Expertly crafted content that stretches the imagination.

Ok you rocked on this one... It blow my mind.

Love the vids. If I could make an editing suggestion, it would be much appreciated if you filtered out some of the high KHZ noise, maybe 8khz and above? It's especially harsh in the fast forward montages.

Like a wood planer for metal retooled for rust removal. Great work as always. Just needs a rust/dust collector on the entry side of the device.

Now you need a dust extractor. Just an idea for next video.

"Зеленый" Как обычно фантазия не даёт покоя рукам 👍👍👍 продолжай!!!

Make it Extreme, This video is fantastic! I liked it a lot!

@MakeitExtreme

5 күн бұрын

Thank you! :)

Awespme engineering. I love it. Just add a rust dust collector/vacuum and it's complete

You should add another brush part on the side. 2 sides at a time!

Love this! Only addition I would make besides some sort of dust collection is adding a front feeder that is chain/belt driven by the rear feeder to make the first foot or so of feed in a consistent speed before it reaches the rear feeder. May not be easy with the motor height controls on the left side, but I figure the sprockets/pulleys would be on the right with just an adjustable support on the left. Same idea as the rear feeder except just the opposite side. The idea may not be worth the trouble. Might just be an OCD thing. 😂 I wish I had a shop to learn to do just a fraction of the things you do on this channel. Very inspiring!

Thank you for the plans. Love all the videos!!!!!!!

I am always very happy to see when you upload a new video, I love your machines and they inspire me! The idea of the dust remover is very good. You could even adapt it to a surface grinder or polisher as others already said. Even if I consider you my masters, I would like to make 2 recommendations: 1: You really should add a dust collector. It just has to be a sheet dome with a connector to a vacuum, but you have to care more about your health, and also the flying rust increases the pace at which metal rusts in your workshop. 2: Don't torch the wood while you grind it. Sawdust is extremely flammable and one enough wood dust volume has filled the air it's gonna create a huge fireball. Lovely video as always, greetings from your biggest fan.

this is like watching somebody build a automatic breakfast cooking mousetrap boardgame machine im waiting for the eggs to roll down shutes crack open into pans, toasts popping out and flying onto plates lol

Чувак да ты чёртов гений!!!

@ivanavila4257

28 күн бұрын

😂😂😂😂

Glad to see you've finally built one of these. I saw one of these being built years ago though it had 3 sides of wire wheels at about 9 inches wide and was adjustable. The guy used nothing but rusty metal and was onrle of his first builds. If your using rusty metal building yourself one of these is definitely a must ..nice one extreme

A connection to vacuum is much needed as rust in the air is bad! Not mentioning the wood dust

Love your builds, thanks for sharing them! 👏 A hopefully useful tip: spring gas cylinders are often mounted upside down (as much as possible) so their oil lubricates the seals. Makes the gas inside last longer; looks odd but works better.

I’ve never seen someone chamfer like that. What a bloody time saver!

@RobertNowagarski

25 күн бұрын

Running a file down the edge? Do it all the time quickest way to knock a burr or sharp corner down without having to use your tooling to do it

@freestyla101

23 күн бұрын

@@RobertNowagarski no to move both axis on the lathe at the same time to move diagonally

Дай Бог вам здоровья, средств и бесконечных идей! Радует что Родина не обделена самородками как вы! Удачи!

Absolutely great job, a nice idea and a lot of work. Congrats ! The construction is craftsmanship at it's best. You know exactly what you are doing !!

@MakeitExtreme

5 күн бұрын

Thank you for your support and your good comments! :)

You could also add extraction system as you can clearly see where all the dust goes from the video. This way you don’t have it flying all over your shop and you do not breathe it in as at first instance it goes directly at you when you feed the piece into the tool. Just a suggestion. Great work, though.

20:10 would love to see his face reaction getting smothered with all that rust :D Nice work!

16:58 Надпись на тисках "СДЕЛАНО В СССР" ! 👍

@MadebyBelarus

28 күн бұрын

Интересно, как они в Австралию попали?

@HolzMichel

28 күн бұрын

@@MadebyBelarus они на кипр

@HolzMichel

28 күн бұрын

да, я также видел, хороший качество!!👌

@nrt8305

28 күн бұрын

А я думал они Португальцы или Испанцы

Could be adapted to make a surface grinder with stone wheels and some adjustments 👍

the first bed roller in front and after the brush head should be powered and have a down pressure roller in front and after the brush head as well. a dust collection hood would a bonus, otherwise the whole thing needs to live outdoors

Ok, I see, I need a whole factory to do such machine

Pretty cool. Very useful. All the junk yard warriors are jealous now.

@MakeitExtreme

5 күн бұрын

heheh indeeed. thank you for your support!

Nice professional build. We shared this video on our homemade tool forum last week 😎

Good luck with breathing all that airborne crap in 😳🤧😷

Title alone told me these guys are making a metal planner, that or a massive sandblasting setup.

Приводные ролики надо было делать по обеим сторонам от обрабатывающего. Слишком долгая настройка под толщину профиля, удобно для массовой обработки, но не для мелкой серии, можно было сделать приводные ролики с ходом на жесткой пружине 2-4мм, ибо можно будет запускать только калибровку, иначе может вырвать и зарядить в пузо. И кстати отличная идея обжигать дерево без вытяжки стружки, деревянная взвесь отлично взрывается:)

profil sürme rulosunu keşke tüm alt rulolara zincirli sistemle yaysaydınız daha güzel olurdu bence. güzel çalışma.

Amazing machine❤

Loved it. Maybe make an attachment for drum sander disks, and consider adding a second puller ahead of the spinning wheels to have a more consistent speed.

*@Make it Extreme* * 20:09 Sure, some iron is healthy in a diet.... but you should DEFINITELY add a vacuum to collect that iron "smoke"... ;) * 20:59 I think you should move/add another feeder mechanism to the "input" side too, so the beam is feed into the brush at an consistent angle, so you don't get that un-even spot in the beginning, and it can be feed with even speed so 21:56 the brush patterns 22:04 is even. * 21:35 Maybe also add some bearings & some support structure in the "non-engine" side of the brush too, so it doesn't wobble as it does sometimes... ... 23:20 WOW it even wobbles with wood & you're barely scraping the surface, I thought it was only with "too hard" things or "too much pressure" put on the brush, yeah it definitely needs some stabilization there. * 24:03 Well.... that is ONE way to solve the "saw-dust problem"... now it's an "ash-dust problem" ;P But this is still a great first version! 👍

As always great job my friend😉

Good job mister beautifully done

Respirator not optional.

i would like to get one of those hand held rust remover lasers

Why you don’t make a dust filter? For wood and rust particles?

Plasma drill press was new to me. Cool.

Brilliant thanks

I really like your videos 😀

nice job. Functional can be expanded by replacing wire brushes to scotchbrite wheels. Hight adjusting system is easy to make, but difficult to use. I think spring loaded adjuster may be more handy. And definitely need to add a fender with a vacuum pump to take away and absorb rust particles and wood dust. But it still a good shop made machine. Way to go.

Прекрасная работа. Только необходима вытяжка. Пыль, любая, в определенной концентрации взрывоопасна.

Cool build I'm def seeing a shop vac dust collector in the future

Very cool and very useful

do some upgreats, put in front first roller to grab straght profile next put the feed roller in front of brush and instal last roller in old feed place take out profile from brushes, this will help u to clear more linear than now when u need in first step control feed with your hands

Does not look too safe. Depends on the friction of one wheel moving the object forward. If the wheel starts slipping it potentially flings the object towards the user ag high speeds.

It's not a bad machine but it needs an emergency stop you can reach from both sides, and ideally a push stick. Like other comments pointed out, that thing is an arm mutilator if you get too close

Nice, excellent.

Good job on the Extreme bits !

Way cool, guys. A question: you choose to do not realize a support for the shaft of the engine to have the possibility of cleaning wider pieces?

I would have made the motor shaft with a LH thread for the brush containment nut. Very cool!

Add auto spring adjustment system according to the size of the pipe

There is just one thing missing and that is a dust collector. Great buil, though :)

I find that keeping your pipe oiled prevents rust in the first place. A good virgin oil is best too, rather than the recycled variety.

Отличная нужная приблуда, руки золотые у тебя! Думаю пылеотвод ты придумаешь. Удачи с твоими проектами.

Super cool as always, dust extraction would have been nice 😊

I’ve actually been looking for something to clean my wood as I torch it. Nothing on the market currently

great work and great idea thanks my dear friend ❤♥

Does it make sence to build switching so that motors can turn rotation direction - you get to the end and flip a switch and send it back

Bonita maquina con los cepillos circulares, si se quita la roña de los tubos o de lo que tu quieras poner, pero la roña la dejas por todo tu taller y no digamos nada de la que tu tragas ahi tienes que istalar un aspirador no muy grande, un cordial saludo, desde ESPAÑA.

All that attention to detail and no dust covers or vacuum hose attachment...

It really needs an in-feed roller. By the time you reach the out-feed half of the material is partially cleaned...

AWESOME! Such creativity and skills! Now spray paint it. I wipe down and spray paint all my good scrap metal so it doesn't rust (I live in a humid area) This works great to prevent the rust and the paint comes off easily using a paper towel and Acetone.

I woulda been done and 2 six packs in by the time you finished this 😂

Надо было ещё щётки сбоку сделать , тогда очистка заготовок в два прохода была бы а не в 4. И систему пылеудаления нужно обязательно приспособить к этому станку 👍👍👍

Me parece muy buena herramienta 👏👏👏👏. Pero un buen extractor evita el oxido en el aire flotando 😜

I'm from India Your all work is amazing Best wishes for all team

this seems impractical. I like that it doesn't give of sparks like a grinder. but having to go over every side several times just seems like a bother. A sand blast box with troughput holes would be a better solution. It would take care of the dust as well.

What will happen if the drum wire rotor turns backwards? It would be more efficient right? You could try it, it 's just changing two wires on the connection.

Exelente trabajo!! Creo que también podría usarse para afilar cuchillos con grandes resultados

Hi, and thank`s for Your machine ideas. Just a tip, from an Engineer/Innovator: Make the main (bruch) motor reversible, and as the "drive motor" goes both ways, it`s just easier to reverse the brush, and clean up the ends, later? Or, if the "feeder" is powerful enough, just revers, the feeder. How`s that? Just a thought. from a Finn in Diaspora

🤘👌👍 На приводную ось мотора где зажаты щётки гайкой установить упор, либо приварить к уголку или прикрутить, чтобы исключить вибрацию щёток.

Very nice. And aside from the brand giving it away... I know a fatcap when I hear one ;)

Всегда лайк, но все же, с вашими навыками и оборудованием, очень странно, когда опорные ролики неразборны, штурвал наклоняется вместе с платформой, нет пылеудаления, проходной резец ниже центра (на быстросменной резцедержке)..

А купить пескоструй не дешевле выйдет? Дело в том, что эти мягкие металлические щётки быстро изнашиваются.

You should build a dustless sand blasting setup.

Great! Now make a dust collector for it.

It's very important to add a vaccum dust collector because this flying metal grains (rust) very dangerous to lungs

Version 2.0 should have auto-adjusting height using springs so you don't have to make manual adjustments

This would be great for removing what they call "superficial" rust. Nothing more boring than doing it by hand. Of course for "pitted" rust, the only solution is abrasive blasting. Even those new lasers coming out are not a substitute. And the finish you get after blasting is a wet dream for any painter. I spent a few grand on a sandblasting pot and all of the equipment, sans the big compressor, which I rent. I spent so MUCH time trying to remove rust by hand that being in that suit and blasting now is pure joy. It's a great and dangerous mess, but it's fun.

How to build a Maschine to max the danger of a dust Explosion 😂 but its a very good rust removing Devise!

First time the cameraman holds a camera

nice work , but a dust collection sys would be adviseble righ??😁😍

Why make the complex machanism to move the motor, its weight should be enough to hold it down, and you could just lift it with a crank to where you need it.

Seems like the feed roller should be placed on the other side of the motor

I don't have the skills to make that so I drop it into a tank of Evaporust.. Very nice work as always...

@zumbazumba1

28 күн бұрын

I am not rich enough to have a tank of Evaporust so i use citric acid(E330 food preservative).

....сомнительная польза от данного устройства, к тому же занимающее отдельное место в цеху! Но всё одно ставлю👍 за талант и рвение!

Need to add dust collection to it.

That’s one messy shop to clean up after wards, that machine needs its own place to live outside the workshop

please make vapor blasting cabinet from sandblast cabinet

Make a dust collector just behind the wire brush/motor

Satisfying treat.....