Pro tips part 1 Audio Video New Construction Pre-wire Home Theater TV In-wall In ceiling speakers
This is part 1 of 2 videos were I go over some basic pro tips on pre-wiring your new construction home for low voltage wire. I go over installation of pre-construction in-wall and in-ceiling speaker brackets and how to place them in your theater room. I also give you some basic tips for in-wall speaker wire and in-wall cat5 cat6 and coax cabling. This is a basic overview only. This video does not go over every detail of the install. I do recommend consulting a professional installer for a more detailed analysis of your particular installation. Also, some states may have restrictions for low voltage wiring, so check your states regulations before attempting to do the wiring yourself.
I have wired many homes this way with great success.
Enjoy the video and I hope you learn something that will help you on your installation.
Until next time, keep dreaming!
My web site and contact info:
www.vtxav.com
avdreamer@gmail.com
or leave a comment on the video
Planned equipment for this install include TDG Audio in-wall and in-ceiling speakers, Anthem receiver, Rotel amplifier and Paradigm tower and center channel speakers.
If you have any questions on any of the equipment, hit me up!
www.anthemav.com
www.tdgaudio.com
www.paradigm.com
{"@context": "schema.org",
"@type": "VideoObject",
"name": "Pro tips part 1 Audio Video New Construction Pre-wire Home Theater TV In-wall In ceiling speakers",
"description": "This is part 1 of 2 videos were I go over some basic pro tips on pre-wiring your new construction home for low voltage wire. I go over installation of pre-construction in-wall and in-ceiling speaker brackets and how to place them in your theater room. I also give you some basic tips for in-wall speaker wire and in-wall cat5 cat6 and coax cabling. This is a basic overview only. This video does not go over every detail of the install. I do recommend consulting a professional installer for a more detailed analysis of your particular installation. Also, some states may have restrictions for low voltage wiring, so check your states regulations before attempting to do the wiring yourself.
I have wired many homes this way with great success.
Enjoy the video and I hope you learn something that will help you on your installation.
Until next time, keep dreaming!
My web site and contact info:
www.vtxav.com
avdreamer@gmail.com
or leave a comment on the video
Planned equipment for this install include TDG Audio in-wall and in-ceiling speakers, Anthem receiver, Rotel amplifier and Paradigm tower and center channel speakers.
If you have any questions on any of the equipment, hit me up!
www.anthemav.com
www.tdgaudio.com
www.paradigm.com",
"thumbnailUrl": "i.ytimg.com/vi/evYRFXgxmRY&t=...",
"uploadDate": "2020-12-04T15:51:19-08:00",
"contentUrl": " • Pro tips part 1 Audio ... ",
"embedUrl": "kzread.infoevYRFXg...",
"duration": "00:10:50",
"publisher": {
"@type": "Organization",
"name": "AV Dreamer",
"logo": {
"@type": "ImageObject",
"url": "yt3.googleusercontent.com/ytc...",
"width": "176px",
"height": "176px"
}
}}
Пікірлер: 80
This was beyond helpful. I wish we could see a video on you pulling the wire and how you start the process. These videos are super helpful but I still want to learn how you begin the process from the very start. You are the best. Thank you for the helpful information.
@avdreamer8250
Жыл бұрын
Thanks for your comments. I wish I could do a start to finish video, but my time was limited. Setting up camera and moving them around takes a lot of time. Maybe on my next project I can do something more detailed.
Another pro tip. Use colored cabling (other than white) for large systems (Green or purple for speakers, orange for APs, blue for hardwired network, yellow for phone etc.) Try to use 14 gauge or thicker. If you have time, build boxes for your speakers.
I zig zag my wires once or twice behind the speaker rings so when the drywallers use a roto zip it doesn't hit your wire...
Thanks! Great video. Wish I had seen it before I did the wiring on my current home we just bought in June
Great video ! I just ran some speaker wires and I totally forgot about those low voltage boxes
Nice video...I install as well....My recommendation is to put a sealed junction box in for your speaker main area,,,,Too many times I learned the hard way. Sheetrock installers just cut wires that are close to the sides of the box and move on. I've had HDMI destroyed this way. They only care about the sheetrock.
@avdreamer8250
Жыл бұрын
Thanks for the suggestion. I have done this in the past and works well, but some installs don't require a box or the client doesn't want to pay for it. I just bag everything up and try to make it as easy as possible for the installers. I've been lucky so far. Thanks
Thanks for the tips with the speakers, it helps a lot 👏 another tip, you can use Velcro rolls and cut them into straps to use for your wire bundles. A lot less time consuming and messy when you go to finishing stages 👌😀
Do you feel $500 a room is reasonable to charge to prewire a room for in-ceiling speakers (2 speakers and 16 AWG wire), and, a low voltage wall box for a keypad controller (fed with Cat6)? Wiring only?
@avdreamer8250
8 ай бұрын
$350 -$500 is average. Depends on location and job size. Thanks for the comment.
Good video, thanks. It looks like the speaker wires are mostly NOT attached to studs or joists in their long runs, but only here and there with the black zip ties? So, no need to carefully pin the speaker wire to wood every few feet?
@avdreamer8250
8 ай бұрын
Hello, Yes the speaker wires are screwed to some studs with loose zip ties. You got of be careful where to do this. Keep away from ALL electrical wires if possible. I try to run the cables in such a way to make things as easy as possible for the insulators and sheet rockers. Sometimes they just don't pay attention or care about stepping on or pinching your wires. Thanks for the comment.
I have a job to do soon
Hi! I am in the phase where I am about to wire my low voltage speakers into the house and have 16 Sonance MAG6r speakers I am installing. As well as 2 of the Sonance SONOS Rectangle speakers. Where can I purchase those pre construction rings?
@avdreamer8250
Жыл бұрын
Sorry for the late replay, had to step away for a few weeks. Am I to late to answer your question? Let me know, I may be able to help. Thanks
What ga wire do you run? We just moved into our home and I see the media place in Jacksonville wired 18ga speaker wire throughout. Perhaps I should’ve asked what wire they planned to use but when I mentioned I wanted runs for 7.2.4 and multiple 20-amp circuits in the media closet for my separate amps and two 20-amp circuits in the theater for my subwoofers, I thought they would’ve ran (at least) 14ga. Now I need to get someone in here to reside :/
@avdreamer8250
2 жыл бұрын
Hi Judd, I use 16 to 14ga throughout. 18ga will work on shorter runs and lower power for whole house audio. for a theater room, I use 14ga minimum for all surrounds. I use 10 to 12ga for the front LCR(towers), 14 to 12ga for inwalls. Thanks for your questions. Please subscribe if you haven't already.
Hello this video is very helpful. Where are you located? My walls are open and I am planning on putting a surround sound system in my media room. What speakers do you recommend and how many?
@avdreamer8250
Жыл бұрын
I'm located in Central Utah. If you go to my web site www.vtxav.com, My contact info is located there. I'd be happy to discuss options for your build. Thanks
Please where can I get this to buy, PAV SIPA50SMV2-00 IP AUDIO 50 WATTS 4x6 ZONE WITH SAVANT MUSIC 2.0 + AIRPLAY 2
@avdreamer8250
2 жыл бұрын
I'm a dealer for VSSL and SONOS. I've done multiple installs with these two brands with very good resalts. They are much easier to install and use. You don't need to hire a custom installer to install these systems. All is run off your phone or tablet. Super easy! If you want more info, check out there web site and get back with me.
For the dynamix that you use. Will those fit any speaker? I have to install DiY micca 8"?
@avdreamer8250
6 ай бұрын
Hello, sorry for the late replay. What speakers do you have? Brand/Model? Brackets are usually brand specific.
Where do you get your orange conduit from ?
@avdreamer8250
5 ай бұрын
Sorry for the late reply, The orange conduit is typically only available to integrators/installers. Depending on your needs, I can ship this to you. Comes in 1" 2" & 3" sizes. Rolls come in 100' to 250'. Let me know if you are interested. Thanks
Nice walk through. What supplier do you use for the orange conduit or what are the details on it?
@avdreamer8250
9 ай бұрын
You can get it through my company. It's not sold online. It's sold to integrators and installers only. Please send me a detailed email of your project to videotronixnaudio@vtxav.com and I will be happy to discuss options for project.
@bfourney
9 ай бұрын
Guy I'm literally an integrator and I guarantee it's sold online. I can ask about 5 people and find out what the carlon part number is or whatever @@avdreamer8250
Quick question - for whole house audio do you run 1 speaker wire per zone ( let say one zone has 6 speakers ) and hook them up in series? or run 1 wire per speaker ?
@avdreamer8250
Жыл бұрын
Well, that depends on a lot of factors. System planning is very important. How do you plan on controlling your system? What kind of amplifier are you using? What is the impedance of your speakers, 8, 4 ohms? What gauge speaker wire are you using. Are you wanting multiple zones? These are just a few of the questions you need to consider in putting your system together. If you need equipment, I can help. Please reach out. I offer free system planning if you purchase from me. Thanks, happy planning.
So if I wanted to do surround sound speakers for a client as a electrician (no low voltage experience besides garage sensors and tv/ph), I would just prewire 16x2 separately to each speaker? The client bought 14x2 speaker wire, would that work as well or is 16x2 speaker recommended? I heard there is a 3-5-7 speaker rule?
@avdreamer8250
3 жыл бұрын
14x2 is fine. I use that in most of my installs. Remember not to run any speaker wire close to electrical wire. If you have to cross a electrical wire, do it a 90 degrees. The rule of 3rds that your referring to is for speaker placement. Here's a article regarding speaker placement. Thanks for the comment. Please subscribe if you haven't already. Thanks www.polkaudio.co.nz/blogs/reviews-resources/13947939-placing-your-speakers-for-the-best-performance#:~:text=To%20minimise%20the%20effects%20of,wide%20by%205%20m%20long.
Thanks for the video. I have open walls in most of my 25 year old house now. I don’t have the money for the Sonos system I intend on buying. ( or Denon Heos). Would you suggest just running all the speaker cables to the one location I intend on putting the receiver?
@avdreamer8250
2 жыл бұрын
Yes, it is common practice to run all your low voltage wire to one location. Thanks for the question.
Quick question... can you daisy-chain outside 6 or 8 inch speakers? I want to group 6 speakers in pairs then run 3 the sets of wires home.
@avdreamer8250
Жыл бұрын
Sorry for the late replay, had to step away for a few weeks. What type of speakers are these? In-ceiling, on-wall enclosed, pedestal speakers on a spike poll etc. "daisy-chain" is not recommended if you are using 8ohm speakers. You can damage your amplifier if you have to many speakers hooked up to the same speaker terminals. You can do it if you know the proper wiring sequence. Using a combination of parallel and series wiring can work, but it gets pretty complicated making sure to keep the ohms load to your amp correct. A distribution amp or a speaker switch works best. If you use a 70 volt system, you can daisy-chain speakers in a line, but you have to speaker that will work with a 70 volt system. 70 volt systems are typically used in commercial systems. I do offer outdoor speaker systems. Reach out if you are looking for equipment. Thanks
Far as the electrical outlet do i need to run the romex wires to a nail in box & let the electrician connect it to power ?
@avdreamer8250
3 жыл бұрын
Sorry for the late response. Had a little surgery. Like in the video, put the open backed boxes where you want your low voltage wire (speaker, Cat5 etc) to come out of the wall. Do not mix low voltage wire with AC wire. You will need to run these low voltage wire yourself or hire a pro to do it. The drywall installers will cut out openings anywhere you put your boxes. Thanks for the question.
one question that you need a permit to install speaker wire and cat 6 wire ?
@avdreamer8250
3 жыл бұрын
I would recommend checking your states code requirements. In a lot of states, low voltage wire does not require a permit. Thanks for the comment. Please like and subscribe if you haven't already.
Hi there those zipetides are they just neiled to the walls , are those special for this type of use ? thanks
@avdreamer8250
Жыл бұрын
I use zip ties that have holes on the tips. I used screws to anker them to the studs.
Great video. Do you ever use Cat5e any more or is everything cat6 for network. I debating which one to use. All runs 120 feet or less.
@leyroy1980
3 жыл бұрын
Cat 6 for sure
@avdreamer8250
3 жыл бұрын
I always use cat6 on all my installs. It has a tighter twist and has a uses a plastic insert to separate the pairs. Less chance of crosstalk and better data speeds. Thanks for the comment.
does every speaker need their own run? 16/2 or 16/4 volume control needs Cat6 from box to a room so if you have controler you need 6 x cat6 runs separate to the room
@avdreamer8250
3 жыл бұрын
Speaker wires are for surround and Dolby Atmos speakers only. One speaker wire for each speaker in the theater. No volume controls needed in this project. Thanks for your comment. Happy listening!
Great video Thanks Where can I get the speaker bracket????
@avdreamer8250
3 жыл бұрын
What speaker brand are you looking for? Brackets are brand specific.
@HungNguyen-sb1yu
3 жыл бұрын
@@avdreamer8250 I have monoprice 8” rectangle speakers. Thank you.
Are these rough in speaker mounts/rings all standardized? So many brands of speakers and rough in rings.
@avdreamer8250
2 жыл бұрын
Hi thanks for the question. No, they are not standardized. They are brand specific. You can contact your installer or brand manufacture for help with that.
@2015_Rubicnn
2 жыл бұрын
@@avdreamer8250 Thanks for the reply....I figured it out and ordered the Klipsch brand.👍
Thanks for the video and sharing your knowledge. Is it required that the low voltage conduit be orange? I have seen blue conduit like that orange conduit in the big box stores.
@avdreamer8250
3 жыл бұрын
No it's not required, however the blue conduit you see in the stores are typically only 1". Unless you are doing a very short run and it is straight. the blue conduit is to small. The orange conduit that I use is 2". HDMI and other cables run through this much smoother. Thanks for the comment. Please Like and subscribe if you haven't already. this help my channel alot. Thanks
Looking for rough in brackets for Polk 8”, can’t find anything specific. Looks like Vangaurd won’t sell to the public? Any help would be much appreciated!!
@avdreamer8250
3 жыл бұрын
What's the model of your 8" Polks? How soon do you need them?
@brandonbess7042
3 жыл бұрын
@@avdreamer8250 16x Rc80i 2x Rc6s...as soon as I can get them
Are speaker bracket specific to each brand
@avdreamer8250
3 жыл бұрын
Yes they are. Each manufacturer makes brackets to fit there speaker sizes exactly. Most of my installs on KZread show the TDG Audio brackets and speakers. I do offer some other brands as well. I just started offering Focal in-wall, in-ceiling and tower speakers. Thanks for the comment.
how do you prep the ceiling speaker brackets for blow in insulation?
@avdreamer8250
2 жыл бұрын
Cardboard over the holes. Sorry for the very late reply. Had some medical stuff to deal with. Thanks
Where do you get that corrugated conduit?
@avdreamer8250
3 жыл бұрын
This particular type of conduit is only available to professional installers. What are you looking for? How much do you need? I may be able to ship some to you.
@LayneCocaine
2 жыл бұрын
It's called ENT, electrical nonmetallic tubing, you can get the 3/4 and 1 in at home Depot.
Where do you but the orange conduit?
@avdreamer8250
2 жыл бұрын
Conduit like this is only available through custom integrators. Thanks for the question. What do you need?
Are you running speaker wire or ????
@avdreamer8250
2 жыл бұрын
I ran Cat6 network wire and RG6 coax to all locations. I run speaker wire in the theater room.
Where did you get the ceiling brackets?
@avdreamer8250
2 жыл бұрын
Sorry for the very late response. Had a medical issue. Speaker brackets are typically dependent on the brand of speakers that you're going to install. What phase of construction are you in? Do you have any speakers picked out for your install? I can help with that.
Where can I purchase in ceiling speaker brackets?
@avdreamer8250
3 жыл бұрын
In ceiling speaker brackets are brand specific. I use TDG Audio in most of my installs. These are performance speakers. If you don't already have the speakers, I can help. How many in-ceiling speakers are you planning on installing and for what purpose? I have other brands as well.
@jonathanknapp1607
3 жыл бұрын
@@avdreamer8250 Thank you for your reply. I have not purchased anything yet so I can go any direction I plan to install approximately 16 speakers throughout the house.
@avdreamer8250
3 жыл бұрын
@@jonathanknapp1607 Jonathan, sounds like a project! What's your time frame? We should talk. We can go over some options for you for your project. You can call me at 435-979-0921. My web site is www.vtxav.com
Looks like you do nice work and sounds like half the battle is working along side a bunch of neandrathals. I'll never understand how or why trades don't respect each other's work.
Get rid of the music. Very irritating.
Did you go for a run, why are you so out of breath
@avdreamer8250
2 жыл бұрын
We are at 5300' elevation in Utah. I just got done putting some ladders and other equipment away. Tring to get the video done before the other contractors returned.