Pro Performance Dakota Digital Gauge Install 88-98 Chevy Truck
Жүктеу.....
Пікірлер: 236
@hawkdsl7 жыл бұрын
For 800 bucks, DD should have made it plug and play.... Literally plug into the stock harness plug, and done. Cutting wires, and running more wires and sensors is redundantly stupid.
@SlickRick214
7 жыл бұрын
hawkdsl remember dumbass there's an ls in it, maybe if it was stock
@SlickRick214
7 жыл бұрын
And 800 bucks is a Lot but nothing out there is just plug and play when it's custom Shit
@hawkdsl
7 жыл бұрын
This gauge set doesn't use the stock sending units, regardless of engine in the truck. The older VFD3-88C-PU-U. gauges does plug into stock harness, and uses the stock sending units... but you did have to pull the old moonie's out, and cut/mod the bezel for it. The only application VHX would make sense for, is a dash out, ground up, restoration with new wire harness. They look great.. but like I said.. to much hassle for 800.
@josiecorona2471
6 жыл бұрын
Hawks...I agree
@littlelearner6454
6 жыл бұрын
hawkdsl couldn’t agree more
@SlickRick2147 жыл бұрын
This should say 88-94 gauges
@dalehall2993
6 жыл бұрын
Rick Rocha 88-94 1st design..95-99 2nd design...
@awsomeassistantthebest1825
4 жыл бұрын
@@dalehall2993 not exactly they made it to 95 to 2000 I have a 3500 1 ton 4x4 I don't know why these guys always say this in their videos I've seen four of them they always say 88 to 98 by the way those dashes suck in the 88 to 94 the best dashes in the Chevys were 95 2000
@dalehall2993
4 жыл бұрын
@@awsomeassistantthebest1825 They changed the 2000 obs style mid year then the NBS body style started around june or july sometime..check your build date sticker on the inside driver door..
@smokechop3599
Жыл бұрын
So I can use the 88-94 on my 95 chevy LS swaped ?
@backroadracing54495 жыл бұрын
Word of advice, you don’t have to drop the column to pull the gauges.
@AZProPerformance
5 жыл бұрын
I know, but makes it easier if you drop it slightly and less likely to crack the bezel as well, trying to squeeze it out of there.
@m7machines7386 жыл бұрын
I love my sweeper guages lol
@jessegonzalez3011
2 жыл бұрын
Me too, as long as they're working correctly.
@3minitruck5 жыл бұрын
This will be perfect for me after I get my ls swap done.
@billbright17554 жыл бұрын
The 78 style dash was very handsome. The 90 dash was homely at best. It looked like someone set an old tv 📺 on a plank. Should be plug 🔌 n play for easier installation.
@peteskipeteski44644 жыл бұрын
You're right--the original gauge cluster rots--I'm saving up for this
@wilbertmendoza58186 жыл бұрын
See now these are the videos I like to see showing you how you did it it helps a lot
@AZProPerformance
6 жыл бұрын
Thanks and appreciate that. We will be doing more and more in the future.
@dalehall2993
6 жыл бұрын
Pro Performance Do a 95-99..
@justinjonessr21666 жыл бұрын
Really 800 bucks that’s ridiculously expensive just for a gauage swap. And then you have mod it to work by adding more wires no thanks.
@AZProPerformance
6 жыл бұрын
Justin Jones Sr it’s all personal opinion. It’s well worth it to me as the originals are terrible. There are gauges for cheaper, but you get what you pay for. Cheap quality, poor looking gauges that are made overseas. These are all USA made and have a lifetime warranty. We never see issues with these and sell them often. Many see the value. Maybe these gauges aren’t for you, which is fine, and sure there are some $200 gauges out there for you.
@justinjonessr2166
6 жыл бұрын
Pro Performance not saying there not good just out of my price range.
@MichelLinschoten
5 жыл бұрын
Ohh stfu ! They are all china made pretentious turd...
@AZProPerformance
5 жыл бұрын
@@MichelLinschoten No, they are not made in China. They are made in the USA, but what do I know... I just been to South Dakota where they make them. I am sure you know way more than me on this subject being you don't know anything about Dakota Digital gauges or been to where they are made. Makes complete sense.
@addamochs
4 жыл бұрын
The one guy here made me think of this movie line... "American components, Russian Components, ALL MADE IN TAIWAN!"
@rickerdman57723 жыл бұрын
Sweet!!! $765 and NO SHIFT (gear) indicator... Will just do an LED light upgrade for less than 12.00 and be VERRYYYY happy with 750.00 in my pocket.. Looks cool though!!
@j.harris7228
2 жыл бұрын
Exactly!
@jacevowell674 жыл бұрын
I love the moon beams tho
@garyjackson40685 жыл бұрын
The oil pressure and voltmeter gauges are missing,but it does looks good.
@matthewavery49165 жыл бұрын
$755 for a gauge cluster? What kinda drugs are you on😂
@AZProPerformance
5 жыл бұрын
matthew avery apparently the same ones as our customers, since we sell them all the time. 👍
@MichelLinschoten
5 жыл бұрын
Uah sure you do ....lol....you can find them all the time right of ebay for hell of lot less. There is an moron born everyday and you tap into it...KUDOS "slooooow clap"
@AZProPerformance
5 жыл бұрын
Michel Linschoten different gauges... that ain’t for the VHX Dakota Digitals. But thanks for chiming in.
@smartfeller1495
5 жыл бұрын
@@AZProPerformance I paid $800 for the entire truck...
@aftisafterme9736
5 жыл бұрын
Hahaha race paks run for 1200 get with the program it's not 1982 anymore gramps
@samhuff47253 жыл бұрын
3:23 I agree those old delco AM units are cool
@ryanpaetz36436 жыл бұрын
Or you can turn the key put it in like 1st without dropping the steering wheel....way easier
@AZProPerformance
6 жыл бұрын
Yes, but still is tight coming out, and more possibility to crack the gauge trim. Knowing those aren't cheap, we decided to drop the column a tad since it was easy to do, and make sure we get it out in 1-piece.
@michaelbebop68685 жыл бұрын
To expensive for my beat up 89
@brappplife9879
4 жыл бұрын
Nah your truck is too beat for these nice gauges price is accurate
@setalight7290
4 жыл бұрын
@@brappplife9879"or" your a dumbass who spent $800 on gauges...but if it makes you happy, good for you you are the dumbass who spent $800 on a gauge cluster for his "nice" gmt 400
@evanshireman5644
3 жыл бұрын
@@brappplife9879 Are you fucking dumb $800 is not reasonable when it probably costs the company less than $10 to make this mess of splicing wires
@brappplife9879
3 жыл бұрын
@@evanshireman5644 tell me how you really feel cry baby, I didn't pay 800 I paid 1100 for the better hdx gauges, all I plugged in was my obd2 port and boom full gauges all new and perfect. Boost, egt, iat, gps speed, tons of other shit totally worth every penny sorry bout your wallet bro
@brappplife9879
3 жыл бұрын
@@setalight7290 you're*
@Patty__0075 жыл бұрын
Everyone is so negative, I think they're badass lookin'
@user-kp7si4zk4z
5 жыл бұрын
yeah their badass but 800$$$ thats how much i damn near paid for the truck itself Just want simple mods to clean the truck up but 800$ gmfu
@nickwebb9937
4 жыл бұрын
Zilla Zay I bought these gauges a year ago but I’m also 17 and still in high school, don’t have bills to pay yet so to me they aren’t crazy expensive
@dewaynegrant23592 жыл бұрын
How do I program my speedometer? I have a 94 C1500 that is LS swapped. I have a 6.0 that came out of a 2004 Yukon Denali. Everything is programmed except the speedometer.
@billygreenhorn92754 жыл бұрын
Its strange that you didnt show it working after the install ??
@everetteromero17995 жыл бұрын
I wish u would of showed more of it
@gasratzcustoms4 жыл бұрын
This is badass! looks awesome and keep up the good work
@Jay100kRed Жыл бұрын
Where did u find the wiring diagram so you know what wires is what and which ones to cut?
@Mojo32
11 ай бұрын
That's what I wondered. Surely they didn't have to test every single wire.
@travisl.83332 жыл бұрын
Awesome job love the idea
@bvandme4 жыл бұрын
I agree with the price comments but it is what it is right, you have the choice to just say no. But I like them enough that Ill be buying them soon so here's my question, I still have the ALDL plug for OBD1 so what does that make me do when hooking up/ Thank you
@AZProPerformance
4 жыл бұрын
Dakota doesn't offer a plug in module for the OBDI and just the OBDII. So in this case, you will use the sensors provided in the box to get that information such as water temp and oil pressure. If you have a mechanical speedo, it will also include a convertor to electronic.
@bvandme
4 жыл бұрын
@@AZProPerformance Thanks, so there will be cutting and splicing to do I guess, can an average guy do it ??
@jo3y1nf4nt3
4 жыл бұрын
Bobby V (and others) look up Eric The Car Guys video on splicing and wiring up his gauge cluster upgrade. He didn't use Dakota Digital but the splicing and identifying wires was helpful. kzread.info/dash/bejne/pKyIlJmPps69lqQ.html
@throttleblip14 жыл бұрын
I would of went with some New Vintage USA gauges... much better styling options than Dakota.
@mcamodell4 жыл бұрын
A gauge cluster that sells for 1/3 the value of the truck and you have to custom install everything, umm...no. WTF?
@georgehernandez50894 жыл бұрын
How do you tell which gear you're in?
@rampena9426
3 жыл бұрын
Im running the FiTech Harness and I had to purchase the GSS-3000 easy install.....you can get rid of the Park neutral safety switch and install the Decoder and run three wires to the GSS-3000 module to read what gear you in and one wire to your VHX(Gauges). You need to keep your starter solenoid wire from your park neutral safety switch plug and run it through a relay....Wiring diagram comes with the GSS-3000 to run your Relay for the starter. It sounds confusing but its not....don't get discouraged.
@jasonsimmons66845 жыл бұрын
Lol I use a speedometer app on my phone and installed mechanical oil and temp gauges in a pillar pod. Fuck that factory junk. Only factory gauge I still use is gas gauge.
@steveebsen15763 жыл бұрын
can you put a 1998 Chevy dash in a 1988 Chevy truck with out Changing the wiring harness outside of the cap
@charlescherington5849Ай бұрын
What about the park,reverse, neutral, and drive indicators on the dakota digital dash is there one on it anywhere how do you know if your in the wright position with the shifter ?
@AZProPerformance
Ай бұрын
Add this module, and will now come in the gauges "message center". azproperformance.com/products/dakota-digital-gear-shift-indicator-unit?_pos=1&_sid=ab5700727&_ss=r
@LouieGO2143 жыл бұрын
Straight blue balls 👇🏻
@brappplife98794 жыл бұрын
Do you remember what the brown and white wire went too?
@curtisjames24435 жыл бұрын
Could you put a double din radio where the original was, above the ac controls?
@backroadracing5449
5 жыл бұрын
ImInnuendo yes you can, metra sells a double din kit. Have one in my ‘93
@laceycraft125
5 жыл бұрын
@@backroadracing5449 Where did you reroute the A/C controls?
@backroadracing5449
5 жыл бұрын
Lacey Craft I read that wrong, I have a double DIN setup in middle of the dash where the usual radio install is
@addamochs
4 жыл бұрын
DIN or Double DIN radios are too wide for that real estate.
@backroadracing5449
4 жыл бұрын
addamochs yeah, that’s why they sell a kit to put one in where the factory cassette player was.
@bryanspencer91664 жыл бұрын
is there a schematic somewhere to tell me what wires i need to splice into
@AZProPerformance
4 жыл бұрын
Always best to check with a test light, but here is a link that will give you a great start. www.gmt400.com/threads/wanted-instrument-panel-connector-schematic.38839/
@blairjosephbernard20114 жыл бұрын
I Would be interested in that style cluster gauge but don’t see point in buying it i can’t find it in km/h 🤷🏼♂️ only see them mp/h witch is useless to me
@AZProPerformance
4 жыл бұрын
Blair Joseph Bernard it’s available in KMH. Give us a call to order or send us an email. 👍
@eliojeda30656 жыл бұрын
Hello guys. What tool did you use to cut the dash? In order to access the wires for soldering.
@AZProPerformance
6 жыл бұрын
We used a dremel.
@anthonyking4387 Жыл бұрын
Whats the best way to find out the color code of the turn signals & wires that need to be tied into?
@AZProPerformance
Жыл бұрын
Use a test light is what we found to work best.
@ksgilbert4 жыл бұрын
What did you do for the gear selector indicator?
@AZProPerformance
4 жыл бұрын
The OBD-II module for the gauges handles that, and pulls the info right from the computer. If running a stock motor, you can add a GSS-3000 to do the same thing.
@ksgilbert
4 жыл бұрын
@@AZProPerformance I am not running a vehicle with OBD-II. I have a Holley Terminator X Max. It is used to control the trans and engine.
@dean16273 жыл бұрын
I have the same truck with an ls5.3 all I have to do basically is plug the gauges into the obd 2 port and they’ll work is that right or am I hearing it wrong?
@ivandiaz8421
Жыл бұрын
Same here... 95 c1500 with LM7 5.3. Have the OBD2 now and was wondering if I can just plug to OBD port? My scanner reads speed, tach, temp, etc. Did you ever get an answer to your question?
@martinhernandez6286 жыл бұрын
Why can you install that sweet radio ? .
@Harley1md4 жыл бұрын
Where do you get the information about which wires to cut out and use for Dakota Digital Gauges? Does Dakota Digital Gauges provide the schematics and information regarding which wires to cut out and use?
@AZProPerformance
4 жыл бұрын
Dakota does not supply it, as it may vary between trucks depending on features. I just looked online and then used a test light to confirm all the wires. The GMT400 forum has schematics and can use that as a starting point. That's all I did and was easy.
@Harley1md
4 жыл бұрын
@@AZProPerformance Thanks!!
@blairjosephbernard20116 жыл бұрын
Nice set up do like to have one but look useless to me I need speedometer to km/h only
@AZProPerformance
6 жыл бұрын
They make these in a metric version and do the KM/H speedometer.
@Slickshapiro13
6 жыл бұрын
To back up pro performance's answer I ordered a metric unit from Dakota for 71-76 caprice / impala unit
@prestonrobert26253 жыл бұрын
air speed indicator
@bigmac96703 жыл бұрын
Every one I have a question can you switch the interior from 98 to a 88-94 dash and door panels?
@edtorre771
2 жыл бұрын
Yes!
@nikolaswells13924 жыл бұрын
1 these trucks dont rev to 8k and i dont want to be in any c/k truck going over 100mph why 160mph?
@AZProPerformance
4 жыл бұрын
Thats a standard they do on all gauges for speed and tach. And, we have sold some gauges to C/K guys having high horsepower and revving engines, that needed it. Yes, not all do, but some have built trucks. Not everyone is putting these gauges into stock trucks.... in fact, most aren't.
@user-gx8ny5qu6x9 ай бұрын
What part number did you use
@Alien004205 жыл бұрын
Is there a metric option? For us Canadian customers who like things in km/hr lol
@AZProPerformance
5 жыл бұрын
Allan Ochsner yes, we can do that. Just has a lead time to make, not normally stocked. Same pricing.
@roberthernandez69486 жыл бұрын
Why can't you put on that sweet radio
@bradyriley77652 жыл бұрын
Can y’all show which wires you used
@bradyriley7765
2 жыл бұрын
And which are which
@guillermohernandez59966 жыл бұрын
I also have an Ls swap u guys sell the plug to connect to obd2
Got that right way too expensive your better off getting out the original gauges and just put in after markets in the holes with a piece of ABS
@EP1CNELSON6 жыл бұрын
The gauges changed in 94.
@AZProPerformance
6 жыл бұрын
The gauges were different in 94 and actually changes earlier, but the dash stayed the same and didn’t change until 95. These gauges fit all 88-94 GM trucks.
@EP1CNELSON
6 жыл бұрын
Pro Performance It says 88 to 98 when they changed to the longer thinner cluster in 95
@AZProPerformance
6 жыл бұрын
We know that. The video is to demonstrate a general sense of the installation of these gauges in that body style truck, from 88-98. Yes, 95-98, but put 88-98 since a lot of people search that and it’s similar in installation. We are very familiar with these trucks and know the differences. Just trying to generally put out a video to show the gauges in this body style truck.
@karymeibarra4772
5 жыл бұрын
does a original 94 gauge cluster fit a 88 truck is it the same plug inn ?
@pjl19192 жыл бұрын
Where do I get the pocket ?
@bvandme5 жыл бұрын
Where do you locate the gear indicator ??? Those units are very pricey for my tastes but what isn't nowadays
@AZProPerformance
5 жыл бұрын
You can add a gear shift indicator and will display in the dash. When I did this install, the OBD-II add-on for the LS gave me the shift indicator. Yes, they are more expensive than traditional gauges, but they are made in the USA and a lifetime warranty. You are getting a nice product for the money.
@bvandme
5 жыл бұрын
So the gear indicator cable is then defunct right and the optional indicator will show up where in the dash? in one of the gauges ?? Any photos of it Travis, and what about Cruise control, mine has that optionThanks
@AZProPerformance
5 жыл бұрын
@@bvandme No indicator is retained from the original dash cluster. Mine showed up in the dash, in one of the message centers. I don't have an image and the truck has been sold. I hooked up all my factory cruise control, and the light so it comes up on the dash as it usually does.
@bvandme
5 жыл бұрын
Thanks Travis, I really want that VHX pod for my 1990 SS454, having trouble with that much cash for it thou but it sure looks tits
@joshcampbell46733 жыл бұрын
How did you hook up speedo? Wanna i have same truck with ls swap and obd2 port
@AZProPerformance
3 жыл бұрын
These gauges pull speed from the OBDII port with their module.
@cookies23503 жыл бұрын
0:24 do y’all know where I can get that plastic panel? I need one they broke into my truck and broke that piece.
@AZProPerformance
3 жыл бұрын
No one I know of remakes it, and just have to find a OE one.
@johnstephens3929
3 жыл бұрын
lmc truck
@bannoch3 жыл бұрын
Anything that can go wrong with the wiring in my truck, has gone wrong
@johnkosheluk10416 жыл бұрын
Do you have.1 for a 1996 chevy pick up and do you give wire colers to tap into
@AZProPerformance
6 жыл бұрын
They sure do make one for the 95-98 dash. The wire colors differ between the old dash and new dash, so not sure on the newer ones. But, it is easy to tell which one does what, with a test light. www.azproperformance.com/Dakota-Digital-VHX-Gauges-95-98-GM-Truck.html
@eltacuachepanteracuhh1593 жыл бұрын
Soy mexicano de que camioneta era el tablero ese que le puso me interesa ponérselo a la mía
@JoseContreras-mv5yz
3 жыл бұрын
Es custom lo puedes comprar en su tienda
@miguelplascencia60933 жыл бұрын
Holy shit why so expensive I would maybe pay $300 for this mod if it was plug and play
@yustirvalera97296 жыл бұрын
Donde puedo mandar hacer uno a si para mi C1500 año 94 silverado
How does one enter miles etc. into the new D.D. cluster?
@AZProPerformance
6 жыл бұрын
Upon initial setup, you can enter in your mileage to match what was on the truck.
@LobbsTrucking5 жыл бұрын
Where did u get that radio
@420BLUNTLEY2 жыл бұрын
Where did you get it
@carlosvalencia33886 жыл бұрын
What about miles previous cluster had??
@AZProPerformance
6 жыл бұрын
carlos valencia you can match your current miles upon initial setup of the gauges. After 100 Miles, it will be permanently set and can’t be changed again.
@hortoncompound26152 жыл бұрын
thats an 88-94 gauge installation not 95+
@AZProPerformance
2 жыл бұрын
We know, that's why the description says '90, and specifically '88-'94. We only say 88-98 in the title foe search reasons. Plus 95+ is very similar process anyways. We are fully aware of the differences in the these trucks. lol
@ryanadamsamazing6 жыл бұрын
Do you know where I can find the wiring diagram for the plug
@AZProPerformance
6 жыл бұрын
I don't. I just used a test light to determine what each wire was. I think that is the best way than trusting a diagram from the internet.
@dalehall2993
6 жыл бұрын
ryanadamsamazing Your local chevy dealer can print off your trucks wiring diagram😎👊🏻
@josebanderas20785 жыл бұрын
for the ls swap are u using stand alone harness on the obs and is how u got gauges to work?
@AZProPerformance
5 жыл бұрын
We used a stand alone harness. When going with Dakota Gauges, you just pull the wires necessary from the LS harness for speed, tach and check engine light. Or we used their OBDII plug in with the gauges, and pulled it all from the OBDII port.
@sebastianfuente8881
2 жыл бұрын
@@AZProPerformance if my gauges don’t work do u think it’s the cluster or something else
@AZProPerformance
2 жыл бұрын
@@sebastianfuente8881 Not sure, but call 480-420-8175 and we can schedule a time to bring it to our shop to diagnose. Once the truck is here, we can fully diagnose it, as over KZread is difficult.
@trevintaylorthe6_7veganttucke6 жыл бұрын
Where are you located? I keep getting the run around with getting mines done!!!
@AZProPerformance
6 жыл бұрын
We are in Mesa, AZ. However, we do our LS installs up in Prescott, AZ. Give me a call sometime and be glad to help and go over details. 480-420-8175. Ask for Travis
@diegomarroquin84415 жыл бұрын
Is the sweeper actually bad?
@MiguelLopez-lb8gm
3 жыл бұрын
No, my work great 👍
@sergiobernal37402 жыл бұрын
Marks miles ?
@AZProPerformance
2 жыл бұрын
Yes
@240sxs13coupe19895 жыл бұрын
Does it come with instructions
@AZProPerformance
5 жыл бұрын
240sxs13coupe1989 yes it does.
@josephroy41325 жыл бұрын
Where u get that pocket
@coty397
5 жыл бұрын
Joseph Roy eBay has them for under 20$
@atribecalledcookies44 жыл бұрын
$800 for a set of obs gauges lol? yeah I don't think so. I can put together a much better looking digital layout that would be plug and play for less than $800.
@freddyvillegas44117 жыл бұрын
what would it cost to install one of these gauges in my 1992 c1500
@AZProPerformance
7 жыл бұрын
We don't do any customer installs, but can definitely get you the gauges, and is very straight forward to install. I would imagine installation would run about $500. The gauges themselves, run $755.
@freddyvillegas4411
7 жыл бұрын
Cool. yeah i been wanting to get them for a while now.. well at least i know you local.. I'm assuming its got a wiring diagram to follow..
@dalehall2993
6 жыл бұрын
Freddy Villegas It would have been great if he listed a color coded WIRING diagram🤔Dakota digital dont include a factory WIRING diagram,but they SHOULD for the price they charge! I bought 1 for my 97 2 door tahoe..had Too go to the dealer to get the WIRING diagram from the parts guy😃
@corbinboltz3666
5 жыл бұрын
@Mnason Wheeler uhm 1990 with obd2 nice try bud obd 2 was 1996 at the earliest and the 5.3 wasnt made for these trucks
@martinhernandez6286 жыл бұрын
What kind of steering wheel is that ?
@AZProPerformance
6 жыл бұрын
Its the Billet Specialties Street Lite we sell. www.azproperformance.com/Billet-Specialties-Street-Lite-Steering-Wheel.html
@martinhernandez628
6 жыл бұрын
Ok , thanks also was that the original radio .
@AZProPerformance
6 жыл бұрын
David Hernandez yes
@francisconavarrete7466 жыл бұрын
.Where do you got it at
@AZProPerformance
6 жыл бұрын
The gauges are sold directly through us. www.azproperformance.com/Dakota-Digital-VHX-Gauges-88-94-CK-VHX-88C-PU.html
@carbug24023 жыл бұрын
Really show the end result for 5 seconds….Really
@anthonyk4 жыл бұрын
this does not fit 95 and newer
@azeissler19875 жыл бұрын
I can't believe they didn't show it fully installed in this truck. Shameful
@AZProPerformance
5 жыл бұрын
Big AL Show them on our site for this particular gauge. Google can be helpful as well. azproperformance.com/products/dakota-digital-vhx-gauges-88-94-gm-truck?_pos=3&_sid=fad0e35be&_ss=r
@blairjosephbernard20116 жыл бұрын
Where do I get a radio like that one???
@AZProPerformance
6 жыл бұрын
Blair Joseph Bernard that’s the stock radio. Can probably get a used one somewhere. I threw this one away.
@blairjosephbernard2011
6 жыл бұрын
Pro Performance that’s not a stock one that’s a aftermarket stereo. I have the real stock one from factory
@blairjosephbernard2011
6 жыл бұрын
I like the one you just removed from the dash where do those some from
@AZProPerformance
6 жыл бұрын
Blair Joseph Bernard the one above the AC control was stock. I’m sure they made more than 1 radio option for those trucks.
@blairjosephbernard2011
6 жыл бұрын
Pro Performance I like the ones above the ac control easier to use. I know they make classics stereo remakes but hard to find where to buy them aha. I had the Cb player style once didn’t like it was to far away to change the station to another one ended up ripping the cb player out throw it out the driver window 🤣
@thechump104 жыл бұрын
800 bucks? Screw that lol
@nightbird3514 жыл бұрын
I really thought it was digital.... Not the 😐
@AZProPerformance
4 жыл бұрын
henry sensei it is digitally driven and just has an analog output. They also make a full digital cluster too, that has just digital out, no needles.
@nightbird351
4 жыл бұрын
@@AZProPerformance oh! 👌 Thanks for the confirmation mate 😁 my bad then 😇
@Johnysoutherner3 жыл бұрын
Let's make a car video but label the appropriate years incorrectly. Should be 88-94 genius
@AZProPerformance
3 жыл бұрын
We obviously know nothing about these trucks... lol... we barely work on them. Genius, this is because we just mainly want to show that the gauges are simplistic to install in these trucks. It is also to grab more attention for people searching as all don't know the dashes change. So, for marketing purposes, it works better to help people find it.... genius (but sure you knew that). And the description better clarifies it is a 88-94 dash specifically.
@aladdin17095 жыл бұрын
i pay $800 for my 1990 c1500...
@AZProPerformance
5 жыл бұрын
Yep. we sell then for $755.
@josephroy41325 жыл бұрын
Don't look digital
@AZProPerformance
5 жыл бұрын
Joseph Roy digital driven, analog output
@BrandonGarcia-sr7fk2 жыл бұрын
Worthless gauges...everything gives out...mechanical way to go
@AZProPerformance
2 жыл бұрын
Bummer they give a lifetime warranty on them, so if they did fail, you just send them back.
Пікірлер: 236
For 800 bucks, DD should have made it plug and play.... Literally plug into the stock harness plug, and done. Cutting wires, and running more wires and sensors is redundantly stupid.
@SlickRick214
7 жыл бұрын
hawkdsl remember dumbass there's an ls in it, maybe if it was stock
@SlickRick214
7 жыл бұрын
And 800 bucks is a Lot but nothing out there is just plug and play when it's custom Shit
@hawkdsl
7 жыл бұрын
This gauge set doesn't use the stock sending units, regardless of engine in the truck. The older VFD3-88C-PU-U. gauges does plug into stock harness, and uses the stock sending units... but you did have to pull the old moonie's out, and cut/mod the bezel for it. The only application VHX would make sense for, is a dash out, ground up, restoration with new wire harness. They look great.. but like I said.. to much hassle for 800.
@josiecorona2471
6 жыл бұрын
Hawks...I agree
@littlelearner6454
6 жыл бұрын
hawkdsl couldn’t agree more
This should say 88-94 gauges
@dalehall2993
6 жыл бұрын
Rick Rocha 88-94 1st design..95-99 2nd design...
@awsomeassistantthebest1825
4 жыл бұрын
@@dalehall2993 not exactly they made it to 95 to 2000 I have a 3500 1 ton 4x4 I don't know why these guys always say this in their videos I've seen four of them they always say 88 to 98 by the way those dashes suck in the 88 to 94 the best dashes in the Chevys were 95 2000
@dalehall2993
4 жыл бұрын
@@awsomeassistantthebest1825 They changed the 2000 obs style mid year then the NBS body style started around june or july sometime..check your build date sticker on the inside driver door..
@smokechop3599
Жыл бұрын
So I can use the 88-94 on my 95 chevy LS swaped ?
Word of advice, you don’t have to drop the column to pull the gauges.
@AZProPerformance
5 жыл бұрын
I know, but makes it easier if you drop it slightly and less likely to crack the bezel as well, trying to squeeze it out of there.
I love my sweeper guages lol
@jessegonzalez3011
2 жыл бұрын
Me too, as long as they're working correctly.
This will be perfect for me after I get my ls swap done.
The 78 style dash was very handsome. The 90 dash was homely at best. It looked like someone set an old tv 📺 on a plank. Should be plug 🔌 n play for easier installation.
You're right--the original gauge cluster rots--I'm saving up for this
See now these are the videos I like to see showing you how you did it it helps a lot
@AZProPerformance
6 жыл бұрын
Thanks and appreciate that. We will be doing more and more in the future.
@dalehall2993
6 жыл бұрын
Pro Performance Do a 95-99..
Really 800 bucks that’s ridiculously expensive just for a gauage swap. And then you have mod it to work by adding more wires no thanks.
@AZProPerformance
6 жыл бұрын
Justin Jones Sr it’s all personal opinion. It’s well worth it to me as the originals are terrible. There are gauges for cheaper, but you get what you pay for. Cheap quality, poor looking gauges that are made overseas. These are all USA made and have a lifetime warranty. We never see issues with these and sell them often. Many see the value. Maybe these gauges aren’t for you, which is fine, and sure there are some $200 gauges out there for you.
@justinjonessr2166
6 жыл бұрын
Pro Performance not saying there not good just out of my price range.
@MichelLinschoten
5 жыл бұрын
Ohh stfu ! They are all china made pretentious turd...
@AZProPerformance
5 жыл бұрын
@@MichelLinschoten No, they are not made in China. They are made in the USA, but what do I know... I just been to South Dakota where they make them. I am sure you know way more than me on this subject being you don't know anything about Dakota Digital gauges or been to where they are made. Makes complete sense.
@addamochs
4 жыл бұрын
The one guy here made me think of this movie line... "American components, Russian Components, ALL MADE IN TAIWAN!"
Sweet!!! $765 and NO SHIFT (gear) indicator... Will just do an LED light upgrade for less than 12.00 and be VERRYYYY happy with 750.00 in my pocket.. Looks cool though!!
@j.harris7228
2 жыл бұрын
Exactly!
I love the moon beams tho
The oil pressure and voltmeter gauges are missing,but it does looks good.
$755 for a gauge cluster? What kinda drugs are you on😂
@AZProPerformance
5 жыл бұрын
matthew avery apparently the same ones as our customers, since we sell them all the time. 👍
@MichelLinschoten
5 жыл бұрын
Uah sure you do ....lol....you can find them all the time right of ebay for hell of lot less. There is an moron born everyday and you tap into it...KUDOS "slooooow clap"
@AZProPerformance
5 жыл бұрын
Michel Linschoten different gauges... that ain’t for the VHX Dakota Digitals. But thanks for chiming in.
@smartfeller1495
5 жыл бұрын
@@AZProPerformance I paid $800 for the entire truck...
@aftisafterme9736
5 жыл бұрын
Hahaha race paks run for 1200 get with the program it's not 1982 anymore gramps
3:23 I agree those old delco AM units are cool
Or you can turn the key put it in like 1st without dropping the steering wheel....way easier
@AZProPerformance
6 жыл бұрын
Yes, but still is tight coming out, and more possibility to crack the gauge trim. Knowing those aren't cheap, we decided to drop the column a tad since it was easy to do, and make sure we get it out in 1-piece.
To expensive for my beat up 89
@brappplife9879
4 жыл бұрын
Nah your truck is too beat for these nice gauges price is accurate
@setalight7290
4 жыл бұрын
@@brappplife9879"or" your a dumbass who spent $800 on gauges...but if it makes you happy, good for you you are the dumbass who spent $800 on a gauge cluster for his "nice" gmt 400
@evanshireman5644
3 жыл бұрын
@@brappplife9879 Are you fucking dumb $800 is not reasonable when it probably costs the company less than $10 to make this mess of splicing wires
@brappplife9879
3 жыл бұрын
@@evanshireman5644 tell me how you really feel cry baby, I didn't pay 800 I paid 1100 for the better hdx gauges, all I plugged in was my obd2 port and boom full gauges all new and perfect. Boost, egt, iat, gps speed, tons of other shit totally worth every penny sorry bout your wallet bro
@brappplife9879
3 жыл бұрын
@@setalight7290 you're*
Everyone is so negative, I think they're badass lookin'
@user-kp7si4zk4z
5 жыл бұрын
yeah their badass but 800$$$ thats how much i damn near paid for the truck itself Just want simple mods to clean the truck up but 800$ gmfu
@nickwebb9937
4 жыл бұрын
Zilla Zay I bought these gauges a year ago but I’m also 17 and still in high school, don’t have bills to pay yet so to me they aren’t crazy expensive
How do I program my speedometer? I have a 94 C1500 that is LS swapped. I have a 6.0 that came out of a 2004 Yukon Denali. Everything is programmed except the speedometer.
Its strange that you didnt show it working after the install ??
I wish u would of showed more of it
This is badass! looks awesome and keep up the good work
Where did u find the wiring diagram so you know what wires is what and which ones to cut?
@Mojo32
11 ай бұрын
That's what I wondered. Surely they didn't have to test every single wire.
Awesome job love the idea
I agree with the price comments but it is what it is right, you have the choice to just say no. But I like them enough that Ill be buying them soon so here's my question, I still have the ALDL plug for OBD1 so what does that make me do when hooking up/ Thank you
@AZProPerformance
4 жыл бұрын
Dakota doesn't offer a plug in module for the OBDI and just the OBDII. So in this case, you will use the sensors provided in the box to get that information such as water temp and oil pressure. If you have a mechanical speedo, it will also include a convertor to electronic.
@bvandme
4 жыл бұрын
@@AZProPerformance Thanks, so there will be cutting and splicing to do I guess, can an average guy do it ??
@jo3y1nf4nt3
4 жыл бұрын
Bobby V (and others) look up Eric The Car Guys video on splicing and wiring up his gauge cluster upgrade. He didn't use Dakota Digital but the splicing and identifying wires was helpful. kzread.info/dash/bejne/pKyIlJmPps69lqQ.html
I would of went with some New Vintage USA gauges... much better styling options than Dakota.
A gauge cluster that sells for 1/3 the value of the truck and you have to custom install everything, umm...no. WTF?
How do you tell which gear you're in?
@rampena9426
3 жыл бұрын
Im running the FiTech Harness and I had to purchase the GSS-3000 easy install.....you can get rid of the Park neutral safety switch and install the Decoder and run three wires to the GSS-3000 module to read what gear you in and one wire to your VHX(Gauges). You need to keep your starter solenoid wire from your park neutral safety switch plug and run it through a relay....Wiring diagram comes with the GSS-3000 to run your Relay for the starter. It sounds confusing but its not....don't get discouraged.
Lol I use a speedometer app on my phone and installed mechanical oil and temp gauges in a pillar pod. Fuck that factory junk. Only factory gauge I still use is gas gauge.
can you put a 1998 Chevy dash in a 1988 Chevy truck with out Changing the wiring harness outside of the cap
What about the park,reverse, neutral, and drive indicators on the dakota digital dash is there one on it anywhere how do you know if your in the wright position with the shifter ?
@AZProPerformance
Ай бұрын
Add this module, and will now come in the gauges "message center". azproperformance.com/products/dakota-digital-gear-shift-indicator-unit?_pos=1&_sid=ab5700727&_ss=r
Straight blue balls 👇🏻
Do you remember what the brown and white wire went too?
Could you put a double din radio where the original was, above the ac controls?
@backroadracing5449
5 жыл бұрын
ImInnuendo yes you can, metra sells a double din kit. Have one in my ‘93
@laceycraft125
5 жыл бұрын
@@backroadracing5449 Where did you reroute the A/C controls?
@backroadracing5449
5 жыл бұрын
Lacey Craft I read that wrong, I have a double DIN setup in middle of the dash where the usual radio install is
@addamochs
4 жыл бұрын
DIN or Double DIN radios are too wide for that real estate.
@backroadracing5449
4 жыл бұрын
addamochs yeah, that’s why they sell a kit to put one in where the factory cassette player was.
is there a schematic somewhere to tell me what wires i need to splice into
@AZProPerformance
4 жыл бұрын
Always best to check with a test light, but here is a link that will give you a great start. www.gmt400.com/threads/wanted-instrument-panel-connector-schematic.38839/
I Would be interested in that style cluster gauge but don’t see point in buying it i can’t find it in km/h 🤷🏼♂️ only see them mp/h witch is useless to me
@AZProPerformance
4 жыл бұрын
Blair Joseph Bernard it’s available in KMH. Give us a call to order or send us an email. 👍
Hello guys. What tool did you use to cut the dash? In order to access the wires for soldering.
@AZProPerformance
6 жыл бұрын
We used a dremel.
Whats the best way to find out the color code of the turn signals & wires that need to be tied into?
@AZProPerformance
Жыл бұрын
Use a test light is what we found to work best.
What did you do for the gear selector indicator?
@AZProPerformance
4 жыл бұрын
The OBD-II module for the gauges handles that, and pulls the info right from the computer. If running a stock motor, you can add a GSS-3000 to do the same thing.
@ksgilbert
4 жыл бұрын
@@AZProPerformance I am not running a vehicle with OBD-II. I have a Holley Terminator X Max. It is used to control the trans and engine.
I have the same truck with an ls5.3 all I have to do basically is plug the gauges into the obd 2 port and they’ll work is that right or am I hearing it wrong?
@ivandiaz8421
Жыл бұрын
Same here... 95 c1500 with LM7 5.3. Have the OBD2 now and was wondering if I can just plug to OBD port? My scanner reads speed, tach, temp, etc. Did you ever get an answer to your question?
Why can you install that sweet radio ? .
Where do you get the information about which wires to cut out and use for Dakota Digital Gauges? Does Dakota Digital Gauges provide the schematics and information regarding which wires to cut out and use?
@AZProPerformance
4 жыл бұрын
Dakota does not supply it, as it may vary between trucks depending on features. I just looked online and then used a test light to confirm all the wires. The GMT400 forum has schematics and can use that as a starting point. That's all I did and was easy.
@Harley1md
4 жыл бұрын
@@AZProPerformance Thanks!!
Nice set up do like to have one but look useless to me I need speedometer to km/h only
@AZProPerformance
6 жыл бұрын
They make these in a metric version and do the KM/H speedometer.
@Slickshapiro13
6 жыл бұрын
To back up pro performance's answer I ordered a metric unit from Dakota for 71-76 caprice / impala unit
air speed indicator
Every one I have a question can you switch the interior from 98 to a 88-94 dash and door panels?
@edtorre771
2 жыл бұрын
Yes!
1 these trucks dont rev to 8k and i dont want to be in any c/k truck going over 100mph why 160mph?
@AZProPerformance
4 жыл бұрын
Thats a standard they do on all gauges for speed and tach. And, we have sold some gauges to C/K guys having high horsepower and revving engines, that needed it. Yes, not all do, but some have built trucks. Not everyone is putting these gauges into stock trucks.... in fact, most aren't.
What part number did you use
Is there a metric option? For us Canadian customers who like things in km/hr lol
@AZProPerformance
5 жыл бұрын
Allan Ochsner yes, we can do that. Just has a lead time to make, not normally stocked. Same pricing.
Why can't you put on that sweet radio
Can y’all show which wires you used
@bradyriley7765
2 жыл бұрын
And which are which
I also have an Ls swap u guys sell the plug to connect to obd2
@AZProPerformance
6 жыл бұрын
Yep, sure do. www.azproperformance.com/Dakota-Digital-OBDII-Interface-BIM-Module-BIM-01-1.html
What would be a round about estimate for that LS swap with the engine and trans being supplied by customer?
@AZProPerformance
6 жыл бұрын
Trevin Taylor runs about 2,500 in labor or so, plus any additional parts needed.
WERE YOU GET YOUR STEERING WHEEL IM LOOKING FOR ONE FOR MY 95
@AZProPerformance
6 жыл бұрын
www.azproperformance.com/Billet-Specialties-Standard-14-Steering-Wheels/
Got that right way too expensive your better off getting out the original gauges and just put in after markets in the holes with a piece of ABS
The gauges changed in 94.
@AZProPerformance
6 жыл бұрын
The gauges were different in 94 and actually changes earlier, but the dash stayed the same and didn’t change until 95. These gauges fit all 88-94 GM trucks.
@EP1CNELSON
6 жыл бұрын
Pro Performance It says 88 to 98 when they changed to the longer thinner cluster in 95
@AZProPerformance
6 жыл бұрын
We know that. The video is to demonstrate a general sense of the installation of these gauges in that body style truck, from 88-98. Yes, 95-98, but put 88-98 since a lot of people search that and it’s similar in installation. We are very familiar with these trucks and know the differences. Just trying to generally put out a video to show the gauges in this body style truck.
@karymeibarra4772
5 жыл бұрын
does a original 94 gauge cluster fit a 88 truck is it the same plug inn ?
Where do I get the pocket ?
Where do you locate the gear indicator ??? Those units are very pricey for my tastes but what isn't nowadays
@AZProPerformance
5 жыл бұрын
You can add a gear shift indicator and will display in the dash. When I did this install, the OBD-II add-on for the LS gave me the shift indicator. Yes, they are more expensive than traditional gauges, but they are made in the USA and a lifetime warranty. You are getting a nice product for the money.
@bvandme
5 жыл бұрын
So the gear indicator cable is then defunct right and the optional indicator will show up where in the dash? in one of the gauges ?? Any photos of it Travis, and what about Cruise control, mine has that optionThanks
@AZProPerformance
5 жыл бұрын
@@bvandme No indicator is retained from the original dash cluster. Mine showed up in the dash, in one of the message centers. I don't have an image and the truck has been sold. I hooked up all my factory cruise control, and the light so it comes up on the dash as it usually does.
@bvandme
5 жыл бұрын
Thanks Travis, I really want that VHX pod for my 1990 SS454, having trouble with that much cash for it thou but it sure looks tits
How did you hook up speedo? Wanna i have same truck with ls swap and obd2 port
@AZProPerformance
3 жыл бұрын
These gauges pull speed from the OBDII port with their module.
0:24 do y’all know where I can get that plastic panel? I need one they broke into my truck and broke that piece.
@AZProPerformance
3 жыл бұрын
No one I know of remakes it, and just have to find a OE one.
@johnstephens3929
3 жыл бұрын
lmc truck
Anything that can go wrong with the wiring in my truck, has gone wrong
Do you have.1 for a 1996 chevy pick up and do you give wire colers to tap into
@AZProPerformance
6 жыл бұрын
They sure do make one for the 95-98 dash. The wire colors differ between the old dash and new dash, so not sure on the newer ones. But, it is easy to tell which one does what, with a test light. www.azproperformance.com/Dakota-Digital-VHX-Gauges-95-98-GM-Truck.html
Soy mexicano de que camioneta era el tablero ese que le puso me interesa ponérselo a la mía
@JoseContreras-mv5yz
3 жыл бұрын
Es custom lo puedes comprar en su tienda
Holy shit why so expensive I would maybe pay $300 for this mod if it was plug and play
Donde puedo mandar hacer uno a si para mi C1500 año 94 silverado
@germanferro83
5 жыл бұрын
Yustir Valera azproperformance.com/products/dakota-digital-vhx-gauges-88-94-gm-truck
How does one enter miles etc. into the new D.D. cluster?
@AZProPerformance
6 жыл бұрын
Upon initial setup, you can enter in your mileage to match what was on the truck.
Where did u get that radio
Where did you get it
What about miles previous cluster had??
@AZProPerformance
6 жыл бұрын
carlos valencia you can match your current miles upon initial setup of the gauges. After 100 Miles, it will be permanently set and can’t be changed again.
thats an 88-94 gauge installation not 95+
@AZProPerformance
2 жыл бұрын
We know, that's why the description says '90, and specifically '88-'94. We only say 88-98 in the title foe search reasons. Plus 95+ is very similar process anyways. We are fully aware of the differences in the these trucks. lol
Do you know where I can find the wiring diagram for the plug
@AZProPerformance
6 жыл бұрын
I don't. I just used a test light to determine what each wire was. I think that is the best way than trusting a diagram from the internet.
@dalehall2993
6 жыл бұрын
ryanadamsamazing Your local chevy dealer can print off your trucks wiring diagram😎👊🏻
for the ls swap are u using stand alone harness on the obs and is how u got gauges to work?
@AZProPerformance
5 жыл бұрын
We used a stand alone harness. When going with Dakota Gauges, you just pull the wires necessary from the LS harness for speed, tach and check engine light. Or we used their OBDII plug in with the gauges, and pulled it all from the OBDII port.
@sebastianfuente8881
2 жыл бұрын
@@AZProPerformance if my gauges don’t work do u think it’s the cluster or something else
@AZProPerformance
2 жыл бұрын
@@sebastianfuente8881 Not sure, but call 480-420-8175 and we can schedule a time to bring it to our shop to diagnose. Once the truck is here, we can fully diagnose it, as over KZread is difficult.
Where are you located? I keep getting the run around with getting mines done!!!
@AZProPerformance
6 жыл бұрын
We are in Mesa, AZ. However, we do our LS installs up in Prescott, AZ. Give me a call sometime and be glad to help and go over details. 480-420-8175. Ask for Travis
Is the sweeper actually bad?
@MiguelLopez-lb8gm
3 жыл бұрын
No, my work great 👍
Marks miles ?
@AZProPerformance
2 жыл бұрын
Yes
Does it come with instructions
@AZProPerformance
5 жыл бұрын
240sxs13coupe1989 yes it does.
Where u get that pocket
@coty397
5 жыл бұрын
Joseph Roy eBay has them for under 20$
$800 for a set of obs gauges lol? yeah I don't think so. I can put together a much better looking digital layout that would be plug and play for less than $800.
what would it cost to install one of these gauges in my 1992 c1500
@AZProPerformance
7 жыл бұрын
We don't do any customer installs, but can definitely get you the gauges, and is very straight forward to install. I would imagine installation would run about $500. The gauges themselves, run $755.
@freddyvillegas4411
7 жыл бұрын
Cool. yeah i been wanting to get them for a while now.. well at least i know you local.. I'm assuming its got a wiring diagram to follow..
@dalehall2993
6 жыл бұрын
Freddy Villegas It would have been great if he listed a color coded WIRING diagram🤔Dakota digital dont include a factory WIRING diagram,but they SHOULD for the price they charge! I bought 1 for my 97 2 door tahoe..had Too go to the dealer to get the WIRING diagram from the parts guy😃
@corbinboltz3666
5 жыл бұрын
@Mnason Wheeler uhm 1990 with obd2 nice try bud obd 2 was 1996 at the earliest and the 5.3 wasnt made for these trucks
What kind of steering wheel is that ?
@AZProPerformance
6 жыл бұрын
Its the Billet Specialties Street Lite we sell. www.azproperformance.com/Billet-Specialties-Street-Lite-Steering-Wheel.html
@martinhernandez628
6 жыл бұрын
Ok , thanks also was that the original radio .
@AZProPerformance
6 жыл бұрын
David Hernandez yes
.Where do you got it at
@AZProPerformance
6 жыл бұрын
The gauges are sold directly through us. www.azproperformance.com/Dakota-Digital-VHX-Gauges-88-94-CK-VHX-88C-PU.html
Really show the end result for 5 seconds….Really
this does not fit 95 and newer
I can't believe they didn't show it fully installed in this truck. Shameful
@AZProPerformance
5 жыл бұрын
Big AL Show them on our site for this particular gauge. Google can be helpful as well. azproperformance.com/products/dakota-digital-vhx-gauges-88-94-gm-truck?_pos=3&_sid=fad0e35be&_ss=r
Where do I get a radio like that one???
@AZProPerformance
6 жыл бұрын
Blair Joseph Bernard that’s the stock radio. Can probably get a used one somewhere. I threw this one away.
@blairjosephbernard2011
6 жыл бұрын
Pro Performance that’s not a stock one that’s a aftermarket stereo. I have the real stock one from factory
@blairjosephbernard2011
6 жыл бұрын
I like the one you just removed from the dash where do those some from
@AZProPerformance
6 жыл бұрын
Blair Joseph Bernard the one above the AC control was stock. I’m sure they made more than 1 radio option for those trucks.
@blairjosephbernard2011
6 жыл бұрын
Pro Performance I like the ones above the ac control easier to use. I know they make classics stereo remakes but hard to find where to buy them aha. I had the Cb player style once didn’t like it was to far away to change the station to another one ended up ripping the cb player out throw it out the driver window 🤣
800 bucks? Screw that lol
I really thought it was digital.... Not the 😐
@AZProPerformance
4 жыл бұрын
henry sensei it is digitally driven and just has an analog output. They also make a full digital cluster too, that has just digital out, no needles.
@nightbird351
4 жыл бұрын
@@AZProPerformance oh! 👌 Thanks for the confirmation mate 😁 my bad then 😇
Let's make a car video but label the appropriate years incorrectly. Should be 88-94 genius
@AZProPerformance
3 жыл бұрын
We obviously know nothing about these trucks... lol... we barely work on them. Genius, this is because we just mainly want to show that the gauges are simplistic to install in these trucks. It is also to grab more attention for people searching as all don't know the dashes change. So, for marketing purposes, it works better to help people find it.... genius (but sure you knew that). And the description better clarifies it is a 88-94 dash specifically.
i pay $800 for my 1990 c1500...
@AZProPerformance
5 жыл бұрын
Yep. we sell then for $755.
Don't look digital
@AZProPerformance
5 жыл бұрын
Joseph Roy digital driven, analog output
Worthless gauges...everything gives out...mechanical way to go
@AZProPerformance
2 жыл бұрын
Bummer they give a lifetime warranty on them, so if they did fail, you just send them back.