Two weeks after i got mine y'all put this out.... Thanks guys.......screw you guys im going home.

@stpbasss3773

5 жыл бұрын

Lmao I got mine two weeks ago too 😂😂 freaking annoying putting it together and WTF is with the screws holding the flat part down they are the smallest Allen size known to man, I bored the holes out a little and used different screws.

Please make a trx4 video for this

@lunseren

Жыл бұрын

Yeah

Whats the part number for the cage hinge mounting system and is there a install video for axial scx10 ii

Mine went together flawlessly.

Love proline products got them on my 10.2 and will be putting them on all my future builds

The Allen screws for the flat part with the fuel tank on it are so freaking tiny lmao I didn't use them I used some extra one's I had from a set of beadlocks.

Does this fit on the your Comp Wagon body? i see no indents to indicate where to make the mounting holes from the back of the cab to the half cage.

It sucks you guys just continue so many things that are awesome. The half cab Silverado bodies gone. :( Losing so many options out there.

Whoa, time out!!! The cage shown at 0:10 into the video is not a current production Pro-Line Back Half cage. I’m not sure what brand that is but would be a nice option for those considering cages. I am considering your cage to use on my Enduro, just haven’t made a final decision yet.

@CheeZyNutZ

2 жыл бұрын

Its an axial bed. AX80046. Youre welcome

What body’s fits the traxxas tr4 sport for the half body cage

Where can i get that back hing? And does it matter what truck it goes on? Cause i have a axial deadbolt

@ProLineRacingYT

3 жыл бұрын

Right here👇⬇👇 www.shapeways.com/product/P229TK7ST/pm10015-pl-back-half-cage-hinge-mount The hinge is not of our design, you would have to contact Knight Customs for fitment onto the Axial Deadbolt. Thanks for your interest and support!

Will the knights custom swing mount work with an Element Enduro chassis? Just ordered the cage and SR5 cab only.

@ProLineRacingYT

4 жыл бұрын

Hi @John Hickey, We have not tested this, but possibly. We recommend contacting Knight Custom's directly for more information. Thanks for your interest and support!

Will this work with the ‘93 ranger body??

Will this work for a Element Enduro HD

So the sr5 from 0:09 to 0:14 who makes the light on the rear cage?

@ProLineRacingYT

5 жыл бұрын

Hi adam searle, That is our 2" Super Bright Straight Light Bar. Here is a direct link to it on our website: www.prolineracing.com/performance-parts/2in-led-lightbar-straight.asp We hope this answers your question. Thanks for your interest and support!

Does this work for the k10?

Hey what bodies come with spots were you would drill the holes for it?

@ProLineRacingYT

4 жыл бұрын

Hi @James M, Most if not all of our bodies include small indents to suggest where to ream or drill your mounting holes. For the most accurate positioning and marking for body holes we suggest the PROTOform Crosshair Body Mounting Kit. Link below⬇⬇⬇ www.racepf.com/accessories/crosshair-body-mounting-kit.asp We hope this answers your question, Thanks for your interest and support!

How do I get more of the plastic washers? I only have two.

@ProLineRacingYT

5 жыл бұрын

Hi KodeKraft RC, Please contact us at support.prolineracing.com/ and the correct department will assist you in getting some replacement washers. We hope this answers your question. Thanks for your interest and support!

Will it fit power wagon?

1st of all nice tutorials but not details. does it comes together with the hinges mount for TRX4?

Will this mount to the dodge power wagon cab?

@ProLineRacingYT

4 жыл бұрын

Hi @100k likes no views, Unfortunately no, the body is too narrow.😔 We hope this answers your question, Thanks for your interest and support!

@idonthaveaname2719

4 жыл бұрын

@@ProLineRacingYT well thanks, i kinda messed up the bed when i was cutting it out

Will this fit the rc4wd hilux? Thanks..

@ProLineRacingYT

5 жыл бұрын

Hi @Jong a, Unfortunately no, this Back-Half Cage was not designed to fit hard body shells. It is intended to fit most poly carbonate front cab bodies. We hope this answers your question, Thanks for your interest and support!

Will this work for the raptor pickup body?

@ProLineRacingYT

3 жыл бұрын

Hi @Franki Garcia, Possibly, but it will require heavy modification since the Raptor body is one piece. We hope this helps answer your question, Thanks for your interest and support!

does this fit a trx4? together with the ford half body? thx in advance

@ProLineRacingYT

3 жыл бұрын

Hi @Kliefhamer, Yes this should fit a TRX-4 no problem👍 We hope this answers your question, Thanks for your interest and support!

@kliefhamer

3 жыл бұрын

@@ProLineRacingYT thx allot m8, ill have a look where to buy it cause i love the look of it, thx

can i replace this with trx4 defender body?

@ProLineRacingYT

5 жыл бұрын

Hi @BTRC, Yes this body and cage with fit a TRX-4 Sport with no modification as it has a 12.3" stock wheelbase. It will also fit the Defender version of the TRX-4 but will need some modification of the rear body post because of its longer 12.8" wheelbase. We hope this answers your question. Thanks for your interest and support!

@liulangmy

5 жыл бұрын

@@ProLineRacingYT greats！ thanks a lot for your reply， appreciated😁😁😁

@sprather84

4 жыл бұрын

@@ProLineRacingYT I was thinking about pairing this cage with the 79 K10 Proline body I've seen it and videos and it looks amazing my question is will that night customs bracket go into my trx4 bumper mounts or wherever it needs to go LOL

Will this bolt right up to a trx4 Bronco chassis?

@ProLineRacingYT

5 жыл бұрын

Hi @EV Cover band, Yes it will👍 Thanks for your interest and support!

These don't fit the new cliffhanger cab

I was looking at this on amazon an hour ago then this gets put up? Cowenidence??? i dont think so

Koo

Can someone at Proline explain why I need a Knight Customs 3D printed part instead of a supplied mount from Proline? You'd think that for $70 it would come with mounts or that Proline would at least offer some body mounts. Ridiculous. Not to mention that third party mount includes 2 different sizes of screws. C'mon man.