I would never forget this is the channel that taught me how to master mixes to pro levels. God Bless You Streaky 🙏🏼

@Spaceman.Osborne

Ай бұрын

SAME! 🙏🏻 Took me from good enough to GREAT 🗿🔥

@alphaprinters9765

Ай бұрын

@@Spaceman.Osborne he is the best on KZread as far as mastering is concerned

I feel like if you turn True Peak limiting off, then it makes sense to use a safer ceiling, like at least -0.5dB. From the Pro L 2 manual: "The best way to minimize inter-sample peaks and distortion, is to use oversampling. In addition, increasing the lookahead can also help quite a lot, but may affect loudness and transparency. In most cases, choosing 4x oversampling in combination with a minimum lookahead time of 0.1 ms, keeps inter-sample peaks within a range of 0.1 dB." I've tested your settings, and see the True Peak Metering show my audio actually going as much as 0.3 dB higher than my set ceiling. I'd recommend either safer Lookahead or a safer ceiling if you're going to turn True Peak Limiting off, because the true peak can range a lot more than 0.1dB with such low lookahead. Oversampling saves but only so much.

@dmstudio.sicksoundz

Ай бұрын

Right should be - 1,0

@branchyapple

Ай бұрын

Thanks

🎉thanks for sharing always dropping useful tips ❤

So you don’t master, you’ve basically made your own preset and slap it on everything

Cool can you tell us why you do each parameter like that ?

@DavidDiaz-he6ei

2 күн бұрын

He has a video on his channel explaining why.

@PaulFisherMedia

2 күн бұрын

@@DavidDiaz-he6eiI’m reading a book on multiband compression

I love you, you give all you have thankful

Streaky streaky

Nice one

At first i was sad seeing all the shorts. Turns out i was wrong every single one of these shorts is absolute GOLD

Why lookahead on zero? Isn’t it more precise to have it previewing before?

@coleco

Ай бұрын

From my very basic understanding, it can dull the track because it's making adjustments on its own based on the incoming audio, and it's adjustments might not be what you want. Some PLEASE correct me if I'm wrong.

@ALBUQUERQUEMusic

Ай бұрын

@@coleco I thought the lookahead was a device to capture the wave coming with more precision, increasing the precision and overloading the processing.

Are those settings also usable with the limiter from SSL?

On every master, haha

Do you do this for all genres?

Hi Streaky, why is the limiter attack set to 10s. It feels a little too large to detect any peaks. What is the motive for this?

@LETTMusic

Ай бұрын

Attack on Pro L 2 isn't "attack", it's the 1st stage of release, and release is the 2nd stage of release. The attack is still instantaneous. Audio will still be brickwalled at the ceiling. It's confusing, but it's in the Pro L 2 manual.

@tundesmart

Ай бұрын

@LETTMusic That's interesting. It seems this is the motivation for a two-stage release settings in FL studio's Maximus. Thanks a lot for the clarification!

@ABbruh

3 күн бұрын

If you look at the visualizer you can see it detecting peaks

How many dB of reduction should I ideally be seeing in the most energetic part of the song when I push it up with these settings?

@7thLETTERbeats

Ай бұрын

Around 3db of reduction is ideal. Or as much as you want until it sounds bad, then pull back till it sounds good.

@alexdiplock71

Ай бұрын

I find up to about 5/6 is still transparent I use a clipper if it overshoots 6.. also I find bass heavy dance music release to about 30ms works well otherwise some times a bit of crackling can occasionally be heard

@Elliott.Revell

Ай бұрын

Thanks guys

It didn't work for me. The Kclip gave me a more clearer sound on x4 oversampling?

@jaydobeatzz

Ай бұрын

Ur computer might not be able to handle that setting. In that case stick with 4x

@Zerdesht

Ай бұрын

It'll sound clearer once the audio is rendered into WAV or MP3. Right now the high oversampling is hard on your CPU.

@musicforthemind3421

Ай бұрын

My computer is fine lol. I run over 200 pluggins at times. It just doesn't handle a BIG volume like the rest. I make DnB and my tunes are -3lufs

@musicforthemind3421

Ай бұрын

​@@ZerdeshtBouncing something that sounds crap is the worst advice I've ever had mate

@damonhumble

Ай бұрын

@@musicforthemind3421he’s saying that the artifacts you’re hearing are due to your pc being unable to handle the level of oversampling used and will not be present in the final rendered wav. Take people’s advice and you’ll learn something, or don’t, it’s your choice.

Confused me bc that are no limiting 🤔

If i open fabfilter l2... Automaticly my hand going to this settings always.... Thanks streaky sir❤️

why no true peak?

@Sample_Props_Official

Ай бұрын

Cause someone can do a shit on an analog signal flow.. thrue peak is not for him.

0.3 dB

@YoungNino2017

Ай бұрын

it doesn't matter... one stupid thing about pro-l is it's not actually hard limiting at that level... it's only turning down the final output -.1 or -.3, I was so fucking pissed when I figured that out, the company of course explains it away.

@Sample_Props_Official

Ай бұрын

@@YoungNino2017that all ends analog

@RooftopKoreansMusic

Ай бұрын

@@Sample_Props_Official Wha???

why would you have lookahead but also a long attack instead of immediate one. that's not doing much you could've just had an almost 10ms attack and it'll be the same. Also, limiter settings won't be the same for every track and definitely not for every genre. Aside from Output -0.1 I'd say all should be so different.

What does the oversampling do?

@MusokeMSK

Ай бұрын

Oversampling does practically the same thing as TruePeak Limiting. But you have more control over it, because you can decide by yourself how much Oversampling you want. So you don't have to use both. Streaky does it the right way👍

@ParanormalArson

Ай бұрын

It runs the plug in at a higher sample rate. Ex: if you're running your project at 48kHz, the limiter will run at 768kHz. The higher sample rate will reduce the chance of inter-sample peaks, as opposed to true peak limiting which will directly target the inter-sample peaks (or the "true peak"). Think proactive approach ("let's prevent this from happening") vs. reactive approach ("this is happening, let's fix it").

@shaferproducergod

Ай бұрын

It pevents upper distorted harmonics from folding down into the audible range so essentially reduces distortion and you can push it harder but its very cpu intensive

Why true peak is off? 😳

@Streaky_com

Ай бұрын

I lose transients when pushing into it

Nooooo dont tell them the sauce i use this on everything as well

10 seconds attack?!

@MarliqueMusique

Ай бұрын

Its Milli seconds not seconds

@systematic-sound

Ай бұрын

@@MarliqueMusique it's clearly 10 seconds

@steveo6408

Ай бұрын

@@systematic-soundit’s milliseconds dude, why tf would it be seconds

@systematic-sound

Ай бұрын

@@steveo6408 yeah good question. But rewatch the clip, when he dials in the attack the UI says clearly 10 seconds.

@shaferproducergod

Ай бұрын

In Pro L 2 the “attack” function isnt standard attack like a normal compressor. The “attack” knob in Pro L2 effects how quickly the release function kicks in (if you hover over it with your mouse it will explain this)

It's a clipper now :)

@Sample_Props_Official

Ай бұрын

You are a clipper

@JohnMichaelFord

Ай бұрын

@@Sample_Props_Official It's true :)

@Sample_Props_Official

Ай бұрын

@@JohnMichaelFord I learn it still and still. Im sometimes done.. what I know every digital mixer with amp has +6dbu clipper. If I see this well.

Pro L2 sucks as a limiter. It changes the original tone of the mix too much.

Bs

Pls dont ever use this song

Is this your only limiter on the Master or do you use more?