I hope this video helps! Be sure to SUBSCRIBE and checkout my Kitchen Essentials Video! kzread.info/dash/bejne/dmeWuqOioriniZc.html

@onepoorguy

10 ай бұрын

I appreciate your input. We have a set of Cutco (before I knew that Cutco is crap...I spend a lot of time trying to keep them sharp because they don't hold their edges well). Dull knives are very dangerous, as you know. I thought your video was a good beginning primer. Looking forward to your future knife videos. As I understand it, the chipping is more about which type of steel is used instead of the style/design (e.g. Japanese, European). Hoping you venture into types of steel, and how to know what angle (bevel) you use to sharpen, since if you hold at the wrong angle you'll do more damage to the blade instead of sharpening it. One comment I would have is that you didn't mention the tang. You talked about handles, but the tang needs to go the length of handle. Correct? The handle should sandwich the tang, and be visible.

@pr0faker

10 ай бұрын

the diamond pull sharpener do not work with harder carbon blades like japanese knives, you have a high chance to chip them and ruin them that way. Generally they are not great at best, most shittier than smacking your knife on a rock. If you buy a decent knife you need to know how to sharpen it, with stones its not hard, even a diamond stone to sharpen them (the flat ones like a whetstone) they don't need a lot of maintenance, sharpen fast and are pretty cheap. way better than those shitty pull through crap things. a few youtube videos and you know how to sharpen your knives. The bolster part not being able to sharpen yourself is a myth too, you can do that just fine but you can't go to the extreme point at the beginning no, but you do not use that anyway with those knives. What is most important for a good knife, is the steel and the handle being made for the jobs you need to do with them. All steel is not great if you do a lot of cutting, especially with oils or fat involved.

@onepoorguy

10 ай бұрын

@@pr0faker not an endorsement, but I use the spiderco sharpening system. Seems to work on the cutco knives. The system can use bevels of 30 and 45 degrees.

@cubertmiso

9 ай бұрын

Anyone to help to find spatulas that are thin and keep up with the heat? Using iron skillet but still looking for some "space age" plastic like my old one that I sadly broke after heavy use of 14 years. All that i have bought melt/shed small parts. Preferably maybe polycarbonate or nylon. But they only sell really wide ones that cant bend correctly.

@jstaffordii

9 ай бұрын

@@cubertmiso Mercer Culinary Hell's Tools Hi-Heat Slotted Spatula it full nylon or their Hell's Handle Heavy Duty line of stainless spatulas

What i would say with over 20 years of knifemaking experience is that the most important knife in your collection is a sharp one. Even cheap 3 dollar second hand stainless steel chef knives are often far superior in metallurgical properties than amateur hand made knives. Just the nature of the industry. Get whetstones and learn to sharpen and maintain your edge before you buy nice knives. From the coarsest stones to the finest stones.

@nightroad5810

10 ай бұрын

This, I have set of knife for cooking out at friend's house. It's from cheap brand most come from dollar store. I sharpen it, and It's sharp than most knife I find at my friend's kitchen lol. If I forgot at my friend at house? I'll go buy a new one because it's cheaper than gas money anyway.

@ChefJamesMakinson

10 ай бұрын

Well said!

@tedmccauley9319

10 ай бұрын

Well said, if you are that interested in knives learn how to sharpen them, its not hard and you dont have to send them out. I find it very relaxing.

@sethgaston845

10 ай бұрын

Agree wholeheartedly! No sense spending $100+ for a great knife that you don't even know how to maintain. A $10-20 knife you can and do maintain will always be better than an expensive knife that's been worn out and improperly maintained.

@Youtube-Censorship-Police

10 ай бұрын

i agree with the sharpening part and i think most japanese steels like vg-10, or aus-8 & aus-10 are very overrated & overpriced (zdp189 is great though, but not very stainless). i don't think you find good or even halfway decent steel on a $3 knife though, that's the lowest of low. get something with a decent american pm-steel either from carpenter or crucible, if you want damascus get something from the swedish brand damasteel, they are the only company that uses pm-steels for their damascus.

As an ex chef it’s refreshing to see a colleague explaining about knives truthfully rather than home cook bloggers showing off with their horrendously expensive Japanese knives which they don’t know how to use anyway.

@ChefJamesMakinson

10 ай бұрын

Thank you! it means a lot!

@KenS1267

9 ай бұрын

Amen. I still use a Victorinox chef knife day to day. The only Japanese knife I own is a fish slicer I got as a gift from relatives who had no idea what I did beyond I was a chef.

@Mark-nh2hs

7 ай бұрын

Also many of those blogger japanese knifes are total scams - your paying hundreds for a bargain bin knife. I like to actually hold my knifes and feel their weight distribution.

@smievil

5 ай бұрын

@@Mark-nh2hs think there's generally a lot of suspicious knives that are hard to look up, might not be very easy to figure out which knives are from actual knife makers.

Thank you for this! A lot of influencers tend to make you want a Japanese knife or cleaver or those fancy metal zigzag blade mashed together ones and it made me feel like I was missing out but after seeing the price I just felt bad. A video coming from you, a professional chef, makes me feel better that what I own is good enough.

@ChefJamesMakinson

10 ай бұрын

I know what you mean, but for everyday heavy use a German or French knife is a must. As in the west we tend to put our knives through a lot

@nollypolly

10 ай бұрын

Omg yes! There are so many knife snobs on KZread that are all "You're not a serious home cook if you don't use this $5000 knife that needs to be sharpened with a stone of actual diamonds wet with the tears of a thousand angels". Like dude, chill. I just wanna cut up a chicken.

@cypeman8037

10 ай бұрын

You felt like you were missing out. On what? They're knives that you cut things with. REALLY? 🙄

@bree7179

10 ай бұрын

@@cypeman8037 they look prettier, seem to do the job better, seem to be easier on the wrist. It's the same for any product like wishing you had a vitamix, or a kitchen aid, or an expensive dutch oven, or a hexclad. Glad you don't get influenced but there's a reason they are called influencers.

@bree7179

10 ай бұрын

@@nollypolly I can't stop laughing @ stone of diamonds and tears of angels lol

I know you probably get more engagement on the reaction videos, and I enjoy them, but please don't stop doing the ones focused on your own recipes and cookery tips - always interesting to hear your view on a subject.

@ChefJamesMakinson

10 ай бұрын

I will try, I'm surprised that this video is doing much better then I had thought!

@ayashimizuki5198

9 ай бұрын

yes please more videos like this and more of your recipes, Thank you, because your videos like this one is like a cooking class with clear description, straight to the point, no useless graphics and music, just direct to the subject, so WORTH every second of watching 👀 oh and inheriting 60 year old knives is like the knife is now a magical knife that will start talking if you accidentally cut a millimeter thicker than tradition 😅

@ashleyrose94911

9 ай бұрын

Agree!!!

i love the calmness in your videos.

@ChefJamesMakinson

10 ай бұрын

Thank you!

Excellent overview, chef. Thank you for emphasizing the fact that you do not need expensive knives to be a good cook, and showing what you carry to work as a chef was a very nice touch as well. Thank you for also mentioning how fragile Japanese chef knives are, it absolutely breaks my heart to see people chip expensive and absolutely beautiful Japanese knives. Only thing I wish you would have glossed over is single vs double-bevel knives. I've been using a carbon steel Chinese cleaver recently for most of my cooking at home, and I have to say, i'm pretty surprised at how well it handles. Despite its size, it's thin and light, so it it slices through most things effortlessly and is extremely useful for all but the most delicate work, like boning.

@ChefJamesMakinson

10 ай бұрын

Thank you!

I really appreciate that you recommend affordable knives, especially for home use. I worked in kitchens for 30+ years and most of the knives have been inexpensive (and some as old as I was lol). They got the job done and were no less enjoyable to use (if you can consider chopping 20 heads of cabbage a 'joy' 😂). Well done! I look forward to your other vids!

@ChefJamesMakinson

10 ай бұрын

Thank you!

I'm a huge fan of the chinese vegetable cleaver, it's the best $20 piece of kitchen equipment I've ever bought. I use it for almost everything, and find the only other knives I need to use for home cooking are a bread knife and a small serrated paring knife. The chinese vegetable cleaver has a wider blade, so it can double as a cutting board scrape-and-transfer; and after getting used to the size, shape, and slightly different weight distribution, I find it quicker and more 'maneuverable' than the standard french chef knife, at least for home cooking applications, to the point where I get frustrated with the amount of effort I need to use to cut with a french chef knife, especially large amounts of things.

@JonHaa87

10 ай бұрын

I completely agree, I also mainly use my Chinese style cleaver (and some smaller Victorinox paring knives that I bought in a set). Cutting is very quick and acting also as a spatula is very convenient.

@mrcorey

10 ай бұрын

Totally with you on that one. The cheap $12 Brown & Co. 8" cleaver I bought 30 years ago is still a daily use in my house (I happened to retire from professional cooking just after I bought it. Otherwise, I'd be on my 5th or 6th, by now. Its not a high quality knife). It was suggested by the chef I worked for when I got tendonitis from using a regular French chef knife for a decade in the professional environment.

Victorinox paring knives with the molded grip are a commodity in Switzerland. The can be bought in every supermarket and cost usually below 5 CHF/€/$. They are present in every household and are called "Schnitzer". I have a dozen of them in my drawer, the original short, the long version, serrated, shaping... I use them a lot, also to just open up vacuum bags etc. To do serious cutting I use the santoku a lot.

Great video, an often overlooked subject! I have the Wustoff Grand Prix I set, got it for a wedding present 20 years ago. The wife's been gone for 15 years but I still use those knives every day.

@ChefJamesMakinson

10 ай бұрын

very nice!

@abslie

9 ай бұрын

Still have grand prix knife set from around 20 years ago too .... ! Chicago cutleries, victorinox before that. And now move to kurosaki, shibata, tanaka, tetsujin etc. As getting older, love the light, nimble, and precision Japanese ones, very beautifully made too ...

Can confirm. ... *Victorinox* knives are great quality at a fair price. From pocket knives to field knives to kitchen knives, they are awesome. I even have a Victorinox I.N.O.X. automatic watch and it's built just as tough as their knives.

@thorwaldjohanson2526

10 ай бұрын

They also have super grippy non slip handles. Perfect for a busy professional kitchen. They just lack the Sexappeal of your Wüsthof, Zwilling or high end Japanese knife. But you just can't beat them as a proper tool to get the job done.

He dropped the knife video! i had no idea you could use a bread knife for fruit, good stuff

@Fishrespect

10 ай бұрын

For pinapple is super...

@PlebiasFate1609

10 ай бұрын

​@@Fishrespectsuper what? bad?

@hobbyman47

9 ай бұрын

The only knife for used in cold station for fruits vegetables and breads and sandwiches. Also a petty or pairing knife.

@dankarkoulas1323

9 ай бұрын

Bread knife is great for slicing tomatoes

I use Victorinox knives- both chefs and pairing. Many chefs I’ve spoken to in London have told me they use one themselves and that they can be used “roughly” and still last a decent amount of time. I’ve used both Wustoff and Miyabi and found Japanese knives to require more skill and well trained technique to use well vs European knives which I found to be more beginner and finger friendly. Money aside, long term maintenance should also be a consideration prior to buying.

@ChefJamesMakinson

10 ай бұрын

Yes I would agree with that, Wustof, and others are easier to learn how to cut with.

@thevoxdeus

10 ай бұрын

Yea, I'd recommend the Victorinox chef knife for anyone who wants to make their life easier with a sharp, consistent knife without breaking the bank.

@Nisha-gt4ic

10 ай бұрын

Agreed ❤

@shura0107

10 ай бұрын

Victorinox is good value. I got a set that has everything I need and use it every time I cook. Sure, there are better ones out there, but they're much more expensive.

I LOVE hearing advice from professionals. I hope you'll do a lot more of these. Anything kitchen equipment related, best cooking and storage practices, how to meal prep, anything like that would be awesome and I'm sure we'd all love to hear your take!

@_bats_

10 ай бұрын

Yes, I'd especially love to hear his thoughts on things like pans!

@sethgaston845

9 ай бұрын

@@_bats_ agree 100%!

Great and very informative video, James!! I'm not a professional chef, I didn't study for that, but I grew up in the kitchen and since I was a teenager I worked in a lot of Mexican and Chinese restaurants, that's how I've learned a lot about knives and how to use them properly and sharpen them, especially to butcher and dissect a pig quickly, we always do that for christmas and new year.

@ChefJamesMakinson

10 ай бұрын

Thank you!

Great advice. There are also some excellent budget Japanese knife brands that allow people to experience the performance of Japanese knives at home without great expense and high maintenance. For example, Tojiro and Takamura knives.

@joa8593

5 ай бұрын

I was going to say, Shun and Miyabi are basically scams.

@smievil

5 ай бұрын

"Masutani" seem quite affordable and particularly thin knives, maybe a bit small in general, and limited to santoku, nakiri and maybe average sized chef knife. thin and halftang probably makes them a bit fragile but they might feel good.

@davidtatro7457

5 ай бұрын

@joa8593 Not sure l would say scams, but they are more heavily marketed to westerners who often have no clue how to use and care for them, and are generally overpriced for what they are.

I'm european, but I've been using chinese cleaver style knives (tao) for everything except cutting bread for 5+ years. Never going back to western style knives. The movement, having 2 fingers on the blade instead of one, balance, everything... just feels so much more natural and easier to me. Surprised they weren't mentioned at all in this video.

@pbanthonyv

6 ай бұрын

Love my Kiwi Nakiri, will grab a pricy one if I get the chance. Maybe not the best for every task but for copping up vegetables it is awesome.

@ericepperson8409

3 ай бұрын

Many chinese cleavers are designed specifically for vegetables with only one sharpened edge. I worked with wok chefs that used them for everything. I tried them out a few times, but they are not as good for breaking down meats as a western style knife. With the heavier emphasis on large cuts of meats in western cooking it's pretty obvious where the influence of popular knife shapes comes from in different cultures.

I love how you mentioned that what matters most is the usecase. I myself usually pivot between my chinese cleaver, a kirisame and a santoku for my personal main knives. Kind of funny how its a mood thing sometimes too

Very useful advice. If I can add some more: 1) The single most important factor in terms of knife quality from the performance standpoint (aside from sharpening, which is entirely controlled by the user) is the steel. Everything that James said is correct; stainless steel is easier to care for and easier to sharpen, carbon steel can be made sharper but is harder to sharpen and prone to chipping, etc. However, within those two categories there is great variation. Sticking to stainless steels, not that Japanese knives are not all carbon steel; AUS-8, AUS-10, VG-10 and VG-MAX are all high quality Japanese stainless steels, in increasing order of hardness and (usually) price. Any of those are more than fine. Avoid AUS-6 and VG-1 (not horrible, but have been superseded) and especially 420J, which is cheap steel for cheap knives (do not be fooled by "out-of-the-box sharpness", it is far too soft). They are still usable, but be aware that the maker is really cutting corners. Among other stainless steels, avoid 440C and never ever buy 440A; usually made in China, terrible performance, not worth the money. The most common stainless steel is X50CrMoV15, which is a great choice for the average user in terms of a balance between hardness and durability. If it is impossible to determine the steel used for the knife, assume the worst. Also, I am sorry to say that if the knife is a Chinese brand, there is a fair chance that the steel is not as listed (but reputable brands made in China should be fine).

@smievil

5 ай бұрын

you could make bad knives with good steels or decent knives with bad steels. just going for more reputable brands would probably be good, but there are a lot of knives.

@JohnSmith-oe5kx

5 ай бұрын

@@smievil I do not think that a knife made of bad steel can be considered decent. If the knife is well assembled and made of good steel, you are most of the way there.

"We are finally going to be talking about KNIVES" The martial artist in me made happy noises for all the wrong reasons when you said that. The feel of the handle is absolutely the most important thing. Especially if things are going to get wet. Nothing hurts more than using any hand tool the rubs you the wrong way. Excellent as always.

@ChefJamesMakinson

10 ай бұрын

😂

Another important consideration is the balance of a knife: blade heavy, handle heavy or neutral. This affects your fatigue and performance. Thanks for posting :)

@ChefJamesMakinson

10 ай бұрын

Yes it is and that's why it's better to hold the knife in your hand before buying especially when buying a good quality knife

@Yugurta85

10 ай бұрын

Is there a preferable one amongst those three? Or it depends on the person/use for the knife? Just curious, I've never had a blade heave knife and I think it would feel odd tbh.

@jotade2098

10 ай бұрын

@@Yugurta85 For all around use the best is clearly neutral, feels nimble and fatigues you less. Blade heavy is interesting for cleavers as it multiplies your force for heavy chopping and a handle heavy may be good for small ones like paring knives cause it tends to stay in the palm of your hand and the blade acts like a finger. The weight is seen by balancing the knife over your finger (where the handle meets the blade), if it leans forward it's blade heavy and viceversa.

@TheMrMused

10 ай бұрын

@@Yugurta85 .. the type of grip you use on the knife also plays into the balance. If you primarily grip the blade (pinch grip) with the handle resting in your palm with just a finger (or two) on it, the balance point will be considerably further forward than the same knife using a different grip. Other things go into that as well. Is there a bolster? Is there a finger relief in the choil? Is it a long blade like a yanagiba or sujihiki? Is it a cleaver? etc.

Great video. If anyone needs a sharp, reliable knife, it is a butcher and their knives tend to be as cheap as chips. But, they use a steel nearly every minute. My worst ever purchase was a global diamond steel (today's rrp is £300, Eur 350, $385) it sits in a drawer. Perhaps my favourite is a Victorinox (I think - the logo has long faded) serrated palette knife. The key thing is learning to maintain an edge on a knife is the most important thing. A cheap, sharp knife is a lot better (and safer) than a blunt, expensive knife

@ChefJamesMakinson

10 ай бұрын

true! I will mention that in the next knife video. it is better to practice and learn how to sharpen with a cheap knife.

Nice, thanks for this man. It's so hard keeping all this info straight when you barely cook a few hours a week for yourself and/or your family. Thorough information but efficient as always.

Incredibly useful video, thank you! I've been cooking at home so much more frequently and a lot of that is thanks to your videos. Every recipe of yours I've tried has been pretty awesome.

@ChefJamesMakinson

10 ай бұрын

Great to hear! :)

Thanks for giving us knowledge in regards to kitchen tools. They're absolute must haves.

@ChefJamesMakinson

10 ай бұрын

not a problem!

When starting to cook at home, it can be helpful to consider a smaller knife (e.g. 5-6 inch chef's knife or santoku). It's a lot easier to control especially if you are a smaller person and/or are working with a smaller chopping board and kitchen space. It can help build confidence with a knife much faster than with the 8 inch knives which most people recommend.

@lsamoa

Ай бұрын

Very true

Thank you so much chet! not a chef nor an experienced home cook but just enough to do basic cooking of everyday food and this video truly got me more aware on the different type of knives!

Hi James. I always find you so informative. You are very knowledgeable. You even teach in your reaction and review videos. Love it.

@ChefJamesMakinson

10 ай бұрын

I appreciate that!😉

Great video! I would say absolutely spot on info for the home cook. I have around 50 years of cooking at home and have had many knives in that time. The Wusthof and Victorinox are the ones that ive always kept.

@ChefJamesMakinson

10 ай бұрын

Glad it was helpful! :)

@rodjones117

10 ай бұрын

Wusthof are great in my opinion - I've been using them for nearly 40 years. Not the cheapest but very good. Victorinox are excellent value if you don't want to spend too much - they'll certainly do the job.

It makes me extremely happy to see that this video didn't have a plug from Kamikoto. Also, never thought to use my bread knife on fruit. I can see that working really well on softer fruit.

Really interesting. I love my knives. I’ve had my Sabatier knives for ages. I’ve some super cheap ones too. One with a small serrated edge and large circular end for cutting tomatoes from my mum! Totally agree that you hold the knife first in the shop. Any decent shop is ok with that. Your knives have stories behind them, that’s the way it should be. Each knife comes to you, gifted, handed down or bought, and they age with you.

If you find the a utility knife more handy than a chef's knife, keep an eye out for models where the blade is slightly dropped from the handle. This will give you more clearance. Spyderco's Z-Cut comes to mind if you want to test the concept without spending too much. It's like a small utility or a large paring knife, and will replace both in many cases. Also works as a boning or fillet knife for smaller tasks. I was cleaning some pig hearts a while back and it was great for that. I kinda prefer a narrower blade when I don't need the heft of a full size knife. I would not recommend a honing steel, especially if you go wild banging your knife against it over and over like the chefs on tv. Get a completely smooth one if you must, but a very light touch with a ceramic stick or a very fine stone will give you better results. A leather strop is unnecessary as well, if your sharpening is done right. I see absolutely no practical reason to get anything but stainless steel knives. If you enjoy the other options that's fine, but the advantage is not there. I very much agree with not needing to spend much money, and the importance of how well the tool fits you personally. Test all the ways you're going to grip the knife. In many ways the handle is more important than the blade, which is basically going to be good enough on any reputable brand knife. Just try to avoid poorly ground blades, e.g. the thick and low hollow grind you see on many inexpensive consumer knives. Very often the first sharpening/re-beveling will increase the performance of your knife. The majority of knives have thicker edges than necessary, and they can be fairly stressed from factory sharpening.

I really like your reaction videos but I’d love to see more of this type of vid. Really puts your skill set and knowledge to good use

@ChefJamesMakinson

10 ай бұрын

Thank you! The sad thing is these videos I don't think are that popular

@turalyawn

10 ай бұрын

@ChefJamesMakinson people love the drama, me included! But keep at it, you are super knowledgeable and your calm demeanor is a really good fit on more educational stuff

@grambottle033

10 ай бұрын

@@ChefJamesMakinson One can end up feeding the other. With your reactions racking up your subscribers and clicks, these videos will show up a bit more and gain more traction. Only a matter of time until they get to just the right spot in the algorithm and the popularity of these videos will spike as well. Fingers crossed :)

@ChefJamesMakinson

10 ай бұрын

@@grambottle033 thank you! I hope so!

Been cooking for a living for a very long time now; this advice is spot on. My Victoronox 8" chef knife was relagated to my home kitchen; have had it 15 years? Still reasonably sharp, with minor work to keep it that way. Best bang for your buck knife you can get IMO. Invested in others; but my current chef knife is the 9.5" Miyabi artesan. Just such a great knife, though the handle takes some getting used to.

The best, most comprehensive video on cooking knives. Thank you James.

@ChefJamesMakinson

10 ай бұрын

Very welcome!

I never appreciated what difference it would make to have a really good knife until I had one. A few months back. I got a nice $130 knife for about 60 and it has boosted my culinary game significantly. Also just being able to make nice. Even fine cuts easily is so worthwhile

@BarAlexC

10 ай бұрын

I'd argue you need: -good steel (plenty of options) -sharpened -good balance and hand feel You probably got them all. There are cheaper knives that fit the bill, tho.

@Knobsmacker

10 ай бұрын

@@BarAlexC Blade geometry is more valuable than simply being sharp because a blade with great geometry will still cut well while not so sharp.

I started some 40 years ago (when I left home) using whatever I could afford. 20 odd years ago, I purchased a good selection of Henckels. Three years ago, I started moving into Japanese knives. My recommendations are pretty simple. Don't rush into Japanese knives. Research the steels used for the core and critically evaluate your sharpening skills using stones. Understand how cladding works and which type of cladding material suits your level of care and knife skills. Learn about the tradeoffs of each core steel type (hardness vs. sharpening difficultly vs. edge retention). There isn't a single "best type", just as there isn't a single "best shape". Don't get a single-bevel as your first or even second Japanese knife. The sharpening of them is quite different than the more normal double bevel. Like western knives, there are some knives that are rather narrow in focus, but make a world of difference if you're doing that thing often. If you've got a friend that uses Japanese knives, ask them if you can do some cutting. Thin blades are amazing to work with, but won't tolerate much abuse. Thick blades can be workhorses, but can also do some incredibly fine work. These days, I know which core steels I prefer and can sharpen well on stones. I know which style handle is comfortable to use all day long. I have my cladding preferences based on what I'll be doing with the knife. I know which blacksmiths I prefer for the type/style of knife in question. There's only one blacksmith I'll blindly purchase from - because he knows what he's really good at and doesn't make knives just to fill a slot. Otherwise, don't get hung up on a single blacksmith and thinking all your Japanese knives should look identical. Be critical. Understand yourself and how you work. What works for me might not work for you and vise-versa. They're tools .. and tools should make the work enjoyable, not harder.

@2adamast

5 ай бұрын

It's a big world. I use for example old german wooden handle cutlery, they also have thin blades (8-10°). As they are not from professionals, abuse is not much a problem, on 5 old poorly maintained knives only one had one small chip.

I love the rocker shaped blade of a French chef's knife. I appreciate your excellent tips. ⚔️

@ChefJamesMakinson

10 ай бұрын

Thank you!

The best chef channel I've seen yet. Thanks for sharing your knowledge.

@ChefJamesMakinson

26 күн бұрын

Wow, thank you!

3) If you need this advice, the chances are that you would do best with a X50CrMoV15 knife (or equivalent) that is not TOO sharp, because a thicker blade edge will keep its shape far longer. Ironically, people who watch KZread videos that obsess over the sharpest knife possible may fall into the trap of making their knife so sharp that it becomes dull immediately, and performs worse than the knife that started out less sharp but holds up to regular use far better with minimal maintenance (which is what most users do).

@TheCyberMantis

8 ай бұрын

Which is why you need to look at the blade core metallurgy, sharpening angle, and what you will be cutting with it. People like to brag about their expensive Japanese SG2 cores at 10deg sharpening angle with cryoduro to 64 hardness and 160 layers of damascus around it, but those edges are delicate. Be careful with it! A knife like that would be hanging on my wall in a beautiful display box, NOT used in my kitchen!

@JohnSmith-oe5kx

8 ай бұрын

@@TheCyberMantis Well, it would be spectacular for cutting sashimi, especially if you never even touch the cutting board. I regularly use three chef’s knives (because I have them): a gyuto that I keep very sharp that virtually never touches the cutting board, a German profile that I keep quite sharp and use for high-volume rock chopping, and a French profile with a more robust edge that I use for the harder stuff. Not that much ever use all three at the same time, I am not a fanatic about it

For homecooks and beginners I recommend not to go in the more expensive Japanese until you can handle them. Probably MAC or global G-2. As a pro chef I have almost only Japanese, mostly carbon steel who ranges between 150-500$.

@maxxes

9 ай бұрын

I enjoy the MAC knives more than globals for sure

Best advice on engraving initials on your knife! I do that with my tools to prevent “ mix ups”. Good video!

@ChefJamesMakinson

10 ай бұрын

Thank you!

Thanks for this thorough and informative video, chef! I will definitely look into the suggested brands :D

@ChefJamesMakinson

10 ай бұрын

Glad it was helpful!

Really interesting video! Thanks for including sharpening info, Chef!

@ChefJamesMakinson

10 ай бұрын

My pleasure!

Thank you so much for making this video! I have been looking to add some new knives in my kitchen for a while and this was really helpful!

@ChefJamesMakinson

10 ай бұрын

Glad it was helpful!

Hi, I was looking to get a new set for my new house. I typed in best knives for the kitchen and one of my favourite you tube guys (Chef James) popped up. Thank you sir ❤

I went with the 15 piece Chicago Cultery Essentials set at walmart, and it's served me well as a home cook. No problems whatsoever. The only thing missing was a big chinese cleaver, which I picked up at a restaurant supply house.

Thank you James for putting out this very useful video

@ChefJamesMakinson

10 ай бұрын

Glad it was helpful!

My dad grew up 15mins away from Solingen so whenever I travel to Germany to visit the family I make it a point to go to the Henkels factory, they have the shop there where you can even get some B stock for a discount. The steak knives I got, it took me a few years before realising there was a bevel ground on the spine and that tossed them in the B stock bin!!

@ChefJamesMakinson

10 ай бұрын

very cool that you got to visit!! :)

you are spot on like always. i have lost or destroyed so many knives so i will buy cheap stuff only, just good enough to get the job done!

@ChefJamesMakinson

10 ай бұрын

Yeah I know what you mean, its not fun to ruin an expensive knife

Thanks Chef James! Please do another video like this for pans!

@ChefJamesMakinson

10 ай бұрын

I need to get more! 😉

Pick the knife that feels good in your hand. That was exactly the advise I got when looking for a quality knife at a good knife shop. All the knives they sell will be of good quality, cheap or expensive. Price is less important than how it feels. I actually wanted to buy a Global chef knife, I love how they look, but found I didn't like the weight and shape of the handle and went with a Wusthof instead. A decade on and I am still very happy with my decision.

@ericepperson8409

3 ай бұрын

I worked with a few chefs that I'm pretty sure just bought Globals for the look and cache. Every time I tried one out, it just felt wrong in the hand. The heft of a Wusthof made most kitchen tasks easier. The Global just felt like they were skidding all over the place.

Good info ... Henkel knives are my favorite and I have been using mine for years. Thanks for the video

@ChefJamesMakinson

10 ай бұрын

you are welcome!

Great basic overall information!! Can’t wait for more in-depth knife videos. I’m only a home cook but addicted to knives!, lol

@AllHailMafakas

10 ай бұрын

That's what Guga Foods claims himself to be. He does not consider himself a chef, but he is world class in making BBQ steaks and has hundreds (if not a thousand) knives.

The trio that I think are most important is a good Chefs Knife, a Serrated Knife, and a Pairing Knife. For me, I like the offset Serrated Knives because it feels like a Chefs Knife in my hand, but that is a personal preference.

Very informative and detailed analysis. I learned a lot. Than you very much chef☺️👍 Keep up the good work 😊

@ChefJamesMakinson

10 ай бұрын

Thanks a lot!

Signature James: A lot, and I mean a lot😂😅

@ChefJamesMakinson

10 ай бұрын

😂

Super helpful! Love your videos man 👍🏻

@ChefJamesMakinson

10 ай бұрын

Glad you like them!

I have recently switched my bread knife with one with an offset handle. I find that it is a lot easier to use, and that I now use it for more non traditional uses.

very well thought out video, many thanks.

@ChefJamesMakinson

10 ай бұрын

Glad you enjoyed it!

I like those kinds of videos. I bought that German peeler from your essential kitchen items or whatever it was titled. Already have many of these knives, but still a good video.

@ChefJamesMakinson

10 ай бұрын

Thank you!

Incredibly useful. Very good advice. Thank you so much. 🔪

Good advice. My fist knives were Victorinox and they are still going, 30 years later, wood handles and all. They do feel heavy and clunky though compared to my newer Wustoff. Three, though, is the magic number. It’s all you need. 😊

@ChefJamesMakinson

10 ай бұрын

Well said! 😉

Very insightful! Many thanks, Chef!

@ChefJamesMakinson

10 ай бұрын

My pleasure!

I have a stainless-clad carbon steel bunka that was on the low end of decent (around 130 euros) that was my first proper knife and it was a total game changer. I got one that was a little smaller than I would have liked because I live a sort of itinerant lifestyle, but I really, really love it. The clipped point is great for more fine work so the knife is extremely versatile. I basically do everything I need to do in the kitchen just with a bunka and a bread knife.

This is a great guide. I actually have a Victorinox multi tool that I got 12 years ago. Every knife is still sharp (not razor sharp but enough to get the job done). I'll have to check them out.

Fantastic video! Thank you.

@ChefJamesMakinson

10 ай бұрын

Glad you liked it!

Great advice about walking to your town's knife shop. That's how I got a Pallarés Solsona carbon steel with boxwood handle chef knife that works like a charm. Costed 1/3rd of what I initially planned to spend, too.

The fact that your 3 picks for home cooking are the 3 exact knives that are currently sitting on my cutting board, makes my reptile brain very happy!

@ChefJamesMakinson

10 ай бұрын

😉

I've been advertised Japanese knives a lot lately and I don't know which brand is the best. Thank you for the video James!

One other benefit I've noticed of a full bolster is that the blade will somewhat self-align making it easier to get nice, straight cuts.

A very important topic from one of my favorite chefs awesome!

Great video. I never had to bring my own knives to when I worked in restaurant kitchens, for which I'm very grateful. Currently, I have a Mac Mighty 8" chef's knife as my "main" knife (you didn't mention it, but it flashed in one of the scenes in your video). I also second Victorinox as a great value brand (and so does pretty much everyone else). I have their 6" utility knife, paring knife, and recently got a boning knife from their very affordable Fibrox collection. I do have one serrated knife (and an unwieldy 9" chef's) from my college days when I tried (and failed) to sell knives for Cutco, and while I wouldn't recommend them, at least they've held up for these past 30+ years.

I've got a Mercer set of 5 for my kitchen. Absolutely love them. Great video.

@twatmunro

10 ай бұрын

I buy the Mercer chef's knife as a present for people who need a first decent kitchen knife. It's as well made as the Wusthof with equivalent materials -- but it costs half the price AND it doesn't have the stupid bolster on.

Good solid basic advise, great video. I'm still using my father's knives made by people like Gustav Emil, decades old and doing a fine job at home.

That's a lot of good information, thanks!

@ChefJamesMakinson

10 ай бұрын

Glad it was helpful!

I can't wait to see what you have to say about the japanese knives. I'm a home cook, but i decided to spend a bit more on a chef's knife (~$80) than you intimated needed to be done, but i have to say i'm happy with my choice. it's coming up on time to either learn to sharpen it properly or go have it sharpened though...

@ChefJamesMakinson

10 ай бұрын

I am planning on it now!😉

Very good summary, I don't work in a professional kitchen tho, so don't have to worry as much for chipping. Love my Japanese knives ☺️

@ChefJamesMakinson

10 ай бұрын

Thanks for watching!

Thanks for this in depth knife tip video. I have some nice knives but I always find myself using the ceramic chef’s knife. It’s light, it’s sharp and it just works. Of course I chipped my first ceramic knife after a week of use, but the second one is 3 years old and still strong.

@ChefJamesMakinson

10 ай бұрын

ceramic knives are delicate

I'm not exactly new in a kitchen. I'm 65 years young and have been cooking since 1974. I just needed a new knife. I ended up buying a stamped 20 cm German style chef's knife at my local store for $18. It's simple, it balances exactly where I pinch the blade when cutting and it's sharp. At that price I'm not afraid of sharpening it myself when needed. I'm always happy to get good advice. Thank you.

you are one of the the most informative channels when it comes to culinary and kitchen skills. I would love to see how you utilize your knives with different varieties of vegetables, fruits, meats, and fish etc. please make a video of this.

@ChefJamesMakinson

10 ай бұрын

Thank you!

Thank you very much, Chef. It letms me know that the basic knife set I purchased years ago (from Calphalon, Katana series) will do me just fine in a home setting, I just probably need to learn to use a honing stone (the set had one).

Edit to add: I think that sharpening knives is more important then the knife itself. A cheap victorinox will work great IF you keep it sharp. A Wustoff will be crappy if you don't keep it sharp. Over the years I've come to prefer the Japanese style knives. I've got a Santoku, Nakiri knife and Babish put something out he calls a clef that I've been playing with. I don't know why I've just never been fond of the French style chef knife. I started using a WorkSharp manual sharpening system to do the heavy sharpening but I invested in a Warthog sharpener for the touch up sharpening - I don't use a steel that much because of difficulty with the angle but I do strop them fairly often. That's just me experimenting to find what works for me with the least energy - I have plenty of time but I lack energy due to chronic fatigue syndrome.

Nice video. It's good to see when a chef also talks about some basic stuff. As it happens, my current chef knife needs a replacement. It's a no-name knife, but not bad, though. Well, but it's about time. Just a few hours before this video was uploaded, I struggled a bit whether it's going to be a single chef knife or a bundle with an additional paring knkife. Both by Wüsthof. Classic Ikon series. I once bought a few Wüsthofs as a present for my Mom and they're amazing. But then I stumbled upon a 7-piece-set by Zwilling. Five knives, one scissors and a self sharpening knife block (well, I guess, theres something with ceramic or so). And it's the Four-Stars-Series. Not so bad. And just shy of 200 Euros.

@antlerman7644

10 ай бұрын

Zwilling are overpriced, the steel is really crap. Stay clear of Chinese brands, cleavers etc are leading in class, but their western knives are a bit crap. Also its often cheaper to buy knives individually than buy a set, often coming with lots of shit you don't need

Thank you for this good advise.

Interesting video for sure As a leftie, your advice about picking up knives and feel them out is even more critical I feel. Some brands might handle not being symmetrical to make it more comfortable for right handed user (which of course causes the left handed user to have an awkward grip). And one thing I think is also critical is knowing your preferred grip style! I love how a lot of japanese styled knives look, but I pinch grip quite a lot, so very traditional handles are really not that nice to hold, in my experience, for my hands. They of course also make amazing knives, it is just that the handle and comfort of the grip excludes a lot of knives for me. I appreciate the honesty and up-front nature of chefs regarding knife choice. So many people seem to focus on getting an expensive/fancy knife, but getting a sharpening kit that works for you I think is a better investment for sure. That being said, if I ever got the chance, I would love working with a local blacksmith to get a large (25+ cm) chefs knife made for me. Though I would say, that's not because I think it would be a much better knife, that would be to work with an artisan, getting a personal knife, that is also a work of art that I would treasure.

I never would've thought of using bread knives for fruits, I'm definitely gonna try that.

highly informative, loving all the video examples of the specific knives along with your explanations 😄

@ChefJamesMakinson

10 ай бұрын

Thank you!

I enjoyed this video and learned a few new things today. Looking forward to the “japanese knife” video!

@ChefJamesMakinson

10 ай бұрын

😉

Lovely! Thank you!

@ChefJamesMakinson

10 ай бұрын

Thank you too!

Great video, very interesting note on brittleness of japanese knives, I don't think I've seen this mentioned much at all when talking about benefits of those. Please consider making a video on your knife sharpening routine! Best knife is a sharp one for sure

@ChefJamesMakinson

10 ай бұрын

I will!

Thank you for the advice, chef. Your suggestions are great for either starting out at home or working in a kitchen. I've been working as a prep/line cook and have done banqueting for 7 years now and your suggestions are spot-on. I especially like all the kitchen supplies you recommend along with the different brands of knives. I use a Victorinox chef's knife, bread knife, and paring knife on a daily basis and highly recommend them. One thing I'd like to also highlight is the importance of taking care of your knives either with a whetstone or diamond stone. I would also highly recommend getting a cheaper or used chef's knife to practice with until you get the hang of it. I was able to get my knives razor sharp, but I also left some nasty scratches on one of my chef's knives after sharpening. This is why I'd recommend starting with something cheaper and practicing with that until you get your technique down. This way you can avoid that mistake I made when starting out. Thanks again and look forward to checking out the rest of your channel.

@ChefJamesMakinson

28 күн бұрын

Thank you so much! I try my best haha don't work to hard!

Thanks for the great video--much appreciated. I am pretty knife-satisfied. I have a bread knife from my mother! It is still wonderful, after 50+ years. Have two paring knives, and a chef's knife with a second serrated. And a couple of "steak knives," so I really feel set.

@ChefJamesMakinson

10 ай бұрын

😉

Knives Out: Chef James movie :) appreciate the thorough and objective perspectice as always! Always used chef knife for fruits but will test the bread one next time!

@ChefJamesMakinson

10 ай бұрын

😉

Great information.

Thank you. Self taught amateur here, Victorinox are my go to knifes, they can get sharp but do dull easily. They can be brought back easily with steels you mentioned. They are a great working man's/high volume type of knife. I do have nicer knifes for at home or something special at work. Being vocal, loud and a manager helps. I'll tell and yell at them if they use/help themselves with my prized knifes. You have too. Same with some of my teflon cookware. I also try not to get too many in rotation as like you said others start helping themselves or stealing. Vary good advice sir.

So much useful information … i love it

@ChefJamesMakinson

10 ай бұрын

Glad it was helpful!

Thank you, Chef James!!

@ChefJamesMakinson

10 ай бұрын

you're welcome!

I have a couple of chef knives. One has a very small heel, and I use that for filetting or cutting crap off of big pieces of meat like brisket. The other one is a pretty large vertically wise one that I use for regular use. I love to use the Santoku for chopping veggies as it is designed to allow for less food sticking to the knife. Last is the Pairing knife which is just for whatever, peeling potatoes, opening up product packaging. Keep 'em sharp and you will always be a happy chef!

@ChefJamesMakinson

Ай бұрын

😉