Quarantine with @Boatworkstoday is that much better. Maybe I'll binge watch the old videos

I just have to say - I have gotten a lot of amazing information from this channel that is helping with my boat restoration. Due to the information shared and the way it is easily presented - I have confidently replace the rotten transom, and working or getting it all back together in the coming weeks. It was a daunting task to take on - and I was not confident in my knowledge base until I found this channel. Props to you sir for your hard work and ability to share knowledge in an easy to understand manner.

You know I don’t think people would think you were trying to pull a fast one we watch because we want to learn And you are a very good teacher you explain everything I have learned so much watching your videos just want to say thank you

I've been restoring a heavily oxidized jet boat and saw this video on the Totalboat product. I bought some. The process I found to work took 5 steps. 1. I washed the boat with diluted hydrochloric acid (toliet bowl cleaner), rinsed and dried the boat with a microfiber towel. 2. I used a spray bottle with water and a green Scotchbrite pad to wet sand the boat, dried off with paper towels. 3. I used 3M heavy duty rubbing compound with a 6 inch foam pad buffer, sprayed and dried with paper towels. 4. I used the 6 inch foam buffer with the Totalboat rubbing compund, dried with a microfiber towel....great shine! 5. I applied Marine 31 wax with a 2 inch low speed buffer and foam pad then wiped with a microfiber towel...the boat looks almost new! The fiberglass is shiny including the metalflake sections. It's a dramatic change. Thanks for your testing as the Totalboat compound does a wonderful job to bring out the shine.

One of the few guys who knows how to correctly fold sandpaper! 👍🏻

Thanks for this, Andy - I'm always impressed how much time and effort you put into your demos.

I really like how you show products when you find something that works. Good stuff as usual. Thanks.

Andy, I love the quick tip videos. Thanks for keeping us going

I always learn/am reminded of better practices in boat care by watching your videos! It must give a great sense of satisfaction knowing how many boats are going to look that much better because of advice you've shared. And I'm impressed by the fact you're not afraid to share your own learning experiences. Instead of allowing pride to dig your heels in on old ways, you're always experimenting to get the best results. You're quickly becoming the "Project Farm - Marine Edition"... and THAT'S a compliment! :D

you are simply the best , thanks for your time and effort you put into your vids

Thanks Andy I learned a lot from this episode. Hope you had a great Easter 👍👍

I am an Auto Tech Teacher in PA and I love your videos!! I have been using total boat products and watching your videos to keep my boat on the water. Keep up the AWESOME WORK!!!!!!!

I have tried lots of compound over the years and I have never found anything that works as well as total buff. It is phenomenal 😍

I just came across your channel and love it. Thank you so much, for the very practical and informative how to videos.

Outstanding video tutorial! I am really surprised and impressed with that polishing job! THANK YOU and BELATED HAPPY EASTER!

Happy Easter! Haven’t tried the Total buff yet but will. I’ve used 3m high gloss gelcoat compound for over 20yrs with great results! Have stopped at 600 a few times and still polished right out! Thanks for sharing great tips and products!

Thank-you for sharing your research ! I have yet to attempt a buff but your video and product testing has me thinking I can finally do this and be happy fpr my efforts using this product you have recommended thx ;).

Total buff is the bomb! This has been out of stock for a while, but just received a shipment from Jamestown Distributors today. Absolutely phenomenal product. This stuff almost is like a liquid more than a paste. It doesn't seem to build up and glaze on pads, so you could go much longer between cleanings. Compared to other compounds it leaves little to no residue behind, just a mirror finish, free of scratches of course! I went over a large cargo van (fiberglass shell) with 1000 grit wet sand, and absolutely no traces of scratches when followed with Total Buff. It had over 16 years worth of oxidation. Truly a revolutionary product! I have no idea how they do it, but I can't thank Andy enough for sharing. I'm sold on Total Buff. It's works extremely well with a DA polisher. I use the Makita dual action with orange, heavy cut pad, and made 4 passes in a crisscross pattern. 2x2 area works well in high 70 temps. Again, so grateful to Andy for all the info he shares. Andy you are one of a kind Sir! All the best!

I tried the maguairs on my old light yellow, oxidized gel coat. It came in 3 parts/stages. I buffed and buffed and buffed. It had very very minimal effect. I wasnt even close to satisfied. I'm going to buy some of this total boat product. That was an impressive result. Thanks for sharing your expertise Andy.

Happy Easter Andy!! I hope things are going well for you and your family.

Happy Easter! I love Festools you keep confirming that.

Happy Easter to you and your family, Mr Andy.

Thanks for sharing that information..I use a wide variety of marine compounds while trying to figure out which works best. I did not know about that product until today. Stay healthy!

Very enticing results.

Thnx for this vid Andy! I;m in the process of "buffing out" my boat I got from my dad after rebuilding a LOT of it. It's a heavily oxidated painted aluminum hull and I've been toying with how to go about removing this oxidation...I'll give your methods here a try! Happy Easter and stay safe!!!

Hi. I like how you do vids. I like your approachable attitude and delivery. I want to say, you have been the ONLY person to make me consider a new compound. I haven't as of yet but the 1st one I try before Level R is Total Boat. I'm a 3M guy (for over a decade) Thanks for this. I hope I can work it into my technique and get the results that I want. Thanks again man. I've passed this info along to everyone I get a chance to talk with about gelcoat. Want to do a video on gelcoat pores??? Drake's detailing and I are at odds. He thinks you can "close the pores" I think pores run deep and getting them to shine is all that's needed because there's just more pores below the surface so no matter how aggressive you get, you deal with the pores in the gelcoat and make them smooth with a "wax" to fill and seal them (for a while) If you ever get to Chelan, WA, come enjoy my hospitality, gladly. Lee

I've gone through the same thing. Thank you, I'm going to order some TBP for my next job.

Great videos as always!

Just watched the first video… I understand why you have 170,000 subscribers… And that’s unheard of considering the audience isn’t everybody! Love this video and plan to use it. Subscribed!

Wow...I was like "Mads, what are you doing on Andy's Channel"...Sanding, Glorious Sanding! LOL. Happy Easter Andy. Stay safe....

@D2O2

4 жыл бұрын

I think Mads used the 3M product, but wasn't gelcoat.

@SailLife

4 жыл бұрын

I'm always lurking in the background ;)

Happy Easter to you and family.

Happy Easter to everyone....and stay safe

My god man I wish I had found your channel sooner! I have sent hundreds of dollars on compounds and sandpaper trying to polish epoxy after sanding out dust nibs and small imperfections. Every auto body pro most epoxy guys kept saying 3M perfect it and a DA polisher would do it. I finally figured out I needed something more. I got an orbital polisher and a more aggressive compound made for gel coats. You would have saved me so much anguish, time and cash.

Happy Easter to you I'm a believer in the total boat line, thank you for your opinion

Great video and comparison and yes, new gelcoat is not as hard so polishes out easier and quicker. However, in my experience this year, I have spent over 60 hours polishing my 28 year old gelcoat and tried many different brands and types of polishes/compounds. I did like the Total Boat Rubbing compound, but it does not clean out of the pad as well as one other that is more aggressive and brings up a shine faster which is Majestic Solutions Vibracut 1000. It seems to cut fast and bring out the shine quickly and then flings off the pad and keeps it from building up so quickly. Then I use a pad spur to clean periodically to keep going. If ever interested, and working on aged gelcoat, you might want to give this stuff a try. I do followup afterwards with the Total Boat Totalshine Finishing compound to remove the fine swirl marks and man, what a shine and finish!

Buffers belly from 15 minutes into the video. Thanks for the videos. Stay safe and stay well.

@boatworkstoday

4 жыл бұрын

Yup lol :-)!!

It might be the kind of compound that breaks down to smaller particles as it's worked. So it goes from coarse to fine as you use it.

I'm going to get some and try it on 2005 Key West. The top caps around the boat are duller than the hull, I guess sun damage from previous owner. Great information thank you very much and Happy Easter

I'm polishing out an old faded out boat with this, and they do have the finishing compound they sell called Total shine. It's an amazing product for sure. A little pricey for the amount, but well worth it.

Thanks for another great video, Andy. Have you ever tried troweling on gelcoat, like you do the gelcoat fairing compound, to avoid a lot of the brush marks?

just wow! Andy

Wow, super stuff. I went directly from your video to the Totalboat store via you link, and wouldn't ya know it.....no stock

Transom. I wanna see that transom get whats coming to it. 😜. Nah, you do great Andy. Keep up the videos. But really. That transom is calling

@yepyep340

4 жыл бұрын

Agreed!

Hi Andy, first of all thank You for sharing with us your precious experience! silly question ... Does the total buff works for regular paint as well?

Great video's Andy. I'm not much of a boat repair guy but learning a lot from you but get confused with all the different types of materials of what to use and where. Do you by chance hold any classes? I have many questions.

Fresh gelcoat...very soft. I bet the clean wool pad would nearly do it.

Hello nice video! Have you ever cut a hull to add a window above the water line? For instance to add a window to a cabin. Thanks!

Andy, can you comment on how a compound that appears to have very aggressive cutting ability could result in low spots if you are doing gel coat chip repair? Say you fair the repair out on a hull side with 600, and then polish out with this compound, will there be a “low” spot in the general area you were polishing?

Have been using the other compounds you showed and haven’t been totally happy. If I can get the Total Boat products in Canada, I’ll try it, for sure. Looks amazing. Thanks and have a Happy Easter.

@jeffthomson1777

4 жыл бұрын

I agree they need to ship to us up here in Canada the products look amazing

@rsmith4080

4 жыл бұрын

Amazon carries some of their products

@gregbrown9138

4 жыл бұрын

@@jeffthomson1777 try Jamestown Distributors, they have this product. Totalboat website is sold out. I hope this helps.

@derricklahaie2357

4 жыл бұрын

Yup, that would sure be nice. I've tried eveything Carquest and Canadian Tire have to offer and have never had a result like that! Ever.

Thanks for your very informative video, I have a 90 model cobalt with moderate oxidation, would you recommend this product for a general buffing over the McGuire 3 step boat restoration process? Thanks

I used the same deerfos wet and dry disks. 1000 12 15 2000 25000 and then finish with a 3000. Then lambswool buff with faracela G3 and meguirs fine. As the hull was out in the weather for 12+ years and a third brush painted soo thick. After a wax with mirror glaze it looks brand new, it had never been on water Ever. Great video, thanks. Stay safe and well

Thanks for the video. Is there some type coating which will protect the gelcoat for years?

Hey men can you make a video showing step by step how to mix gel coat for spry gun apply sanding and buffing but step by step because everyone jump steps and are really confusing

Happy Easter 🐣🐰🐇 day

Hey Andy thanks for the video!But one question I did not hear you say the products full name! Is it Total boats Total shine finishing compound?And also stay safe and happy easter to you and the fam:)

Any Heavy cut or Extra cut compound will work just fine ... been working on boat in annapolis md for 20 years and this was the first thing I learned to buff any gelcoat.. would never used a one step wax to buff out any gel coat repairs ...

I like it

Good stuff

What do you think the best preserving wax is for gelcoat? Something with really good UV protection

Great video, I have learned a lot from all of your videos. Thank you for posting. I bought a 20 year old Starcraft. The Gelcoat is a bit yellowed, but there is old oxidation on the bottom which I am going to apply a new coat to due to some chips and digs, 20 year old boat right. What grit sand paper would you recommend starting off with to try and brighten up the rest of the finish?

@alant759

2 жыл бұрын

Try hitting it with on and off. Careful as it’s acidic, but does an amazing job of removing stains

TotalBuff has a new customer!... #WowThatWasImpressive

They also have a finnishing compound called Total shine.

The cabinets in my sailboat are preformed and are full of stress cracks and breakdown stress points. Can you suggest what to use to resurface them. My boat is a 1985 CnC 24’. Enjoy watching the things you do on your show.

Question for you: I’m tackling a 1989 Bayliner 3270 that I’ve purchased. Can I use a random orbital sander to sand the boat? Just a run of the mill corded Milwaukee version…

Happy Easter! Wonder where Buff Magic falls in your experience.

Hi there, came across this and amazing. Does the age of gel coat make a difference in the way it removes the oxidation. I am sold

what do you put on after the total buff ?

Andy try white diamond buffing compound worked great on my stratos pro 201..but mine had bad oxidation

Hi dear Andi, thank you so much for all your great videos. I have a question regarding the totalboat products, I live in Austria, where can I bay them products? Thank you, Akram from habibi-boat

Also, in this video what was the first thing you used when you applied the paste to the board.?

With this lockdown Spring is extended... Happy polishing!

What pad are you using? Can you reccomend a reasonably priced pad for someone who buffs their fishing boat once a year?

called total boat and they are claiming supply chain issues and don't know when they will get this back in stock. I've tried meguires heavy oxidation remover and not impressed. Do you know where I can get some to finish my flats boat project? Do you have an alternative product? Thanks for all your help and love your videos...so helpful. Keep it up!

Just a thought on wet paper. In another channel a quite experienced automotive painter stated the paper should soak for 20 minutes before sanding. What is your take on that?

That’s great Andy. Jamestown Distributers is literally in my backyard. I need to remove some ghosting from old name decals (same name, new decals, different design). Would this be a good product to use for that?

@MiloYellowknee

3 жыл бұрын

I have two bottles on the way and hope you get an answer… Because that’s what I’m using it for!

Would a 3” wide waterline stripe be two big an area to roll and tip with gellcoat?

You may try Optimum no rinse in your wet sand bucket with a grit guard. Keeps solids down. From automotive industry.

i'll be willing to bet that the compound contain pumice as the "grit" Pumice is very porous, and start out "coarse" and grinds itself down to a finer grit. Thus you can pretty much buff anything with it. Long time ago i worked at a company where we had such a compound - we could also finish sanding at about 500 grit, and buff to an insane gloss with the compound.

what about the bertram transom? connot wait for your approach. Happy easter to your family.

Hey bud what’s the best way to wet sand and buff in crease’s or crevices? Got a pretty sharp crevice, maybe 110° or so and the buffing pad doesn’t seem to make it to the bottom of that.

IMHO, the wool pad helps a lot the compound. You should try with a light foam pad to be sure what the compound is capable of. I hate Maguire's because it's full of oily fillers that mask the defects much than correct them.

What would use on a C aC 78that the gelcoat is chalky

Do you have US supplier for 2" wet sand hook & loop disks? I just bought a RIKON 31-200 sander/polisher and I love that robust one hander.

What was the name of that compound that he used I took all those marked out I never got to see it

Is the result the same on old gelcoat? New soft gelcoat is a bit more forgiving..

Is this compound a DAT polish (Diminishing Abrasive Technology)? BTW 3M does sell compound specifically for gelcoat. I just started to remove the oxidation from my newly purchased 1996 Trojan with the 3M™ Perfect-It™ Gelcoat Heavy Cutting Compound and it worked great.

So, what does TotalBoat Total Shine do? Is it useful given how well TotalBuff works?

Would you use this instead of the aquabuff 1000 or use the total buff after the aqua 1000?

Great video but how we can buy it is not in your amazon account? thanks

How does this work on the clear coat ?

Well hell!? How does it due with no sanding?

Of course it is out of stock anywhere!

Being someone who is not comfortable enough yet to use a rotary buffer and it is still using a da buffer so I don’t burn through the gelcoat I’m curious has anyone tried this buffing compound with a da buffer and what pads did you use with it?

Hey does anybody out there know if you can add color pigment to white gelcoat

I’m curious how this stuff would work on paint. 🤔 I’m redoing a boat and I plan to use paint below the waterline and gel coat for the top. I’d like one product for both of such a thing exists.

Is there anybody you can recommend in the Orange County California area? Thanks!

Can you use this product on Evercoat Gel Kote?

Amazing product! I’ve heard so much good stuff about Totalboat but can’t find anywhere in Canada to buy it. I can’t find a distributor list on their website either. Are you aware of Totalboat dealers in Canada? Thanks!

@MiloYellowknee

3 жыл бұрын

I called them and they are shipping to me… No option on the website, but if you call no problem!

What pad did you use? White or yellow? Course or fine?

Hey can you try ultimate cutter by pro .