This is one of the best how-to videos on ECT3000. I was using it all wrong to chase an open circuit until this video. Thank you.

Awesome "RadioShack electronic learning lab-like video!

What if the circuit isn’t fully opened? Like just a pinched wire with a few threads still hanging on will it still detect an open circuit?

@luisluna8898

5 ай бұрын

Couldn't you just rule that out with a load test?

@2000mvs

8 күн бұрын

Few wires hanging on would not be an open circuit, voltage drop test needed as said .

Finally someone who knows how to make a great video explaining simply (for even a dumbskull like me) how to use this device! Thanks So Much!!🙂👏

Thank You!

Question... If it always powers up displaying an open circuit... how do I know when there is a "real" open to track down?

@Jasonpmc78-wm3xu

6 ай бұрын

Once you plug the back probe onto the wire it will determine whether it's open or short. Since you only have it plugged up to the battery and don't have the probe on a wire /circuit it will display open cause it's not hooked to anything, so therefore open. Hope that makes since.

great.

After watching every KZread video on the ECT 3000, I tried to use it to locate a short to ground in the wiring harness running from the fuse box to the fuel gauge on my Jeep. After placing the green probe in the fuse box, the transmitter signaled a short, I then locked in the signal from the transmitters green wire connection. The receiver wasn't much help at all in locating the that short to ground.

Great work

To find an open circuit location....why do I need to remove the + voltage?

Hi, great demo, thank you. Can you advise if Power Probe will sell these demo boards. I am a trade teacher and this looks much more professional than my set up?

@13GADGETMAN

Жыл бұрын

Hi Rick. So far, I custom build these, but they have been talking about producing this new single case style in quantity. If they do I will post about here.

@ricksullivan6395

Жыл бұрын

@@13GADGETMAN , thank you, I hope they do so as I can present the demo more clearly

Receiver too damn big , a extended flexible head or extended solid antenna options , good tool if you working in large open area, it Would be nice if you release a updated smaller Version that will work with the existing transmitter

Where can i buy it and how much is it ?

Saludos, tengo una duda... Para buscar un cable picado seria mas seguro retierar los postes de la batería que alimentan a todo el vehículo? Solo conecto la herramienta a +/- de batería dejando todo el resto de los circuitos sin voltaje...?

@13GADGETMAN

2 ай бұрын

When tracing for opens or broken connections it is probably safer and to ensure there would be no voltages anywhere in the wiring. Only when tracing shorts that the battery must be connected to maintain the connection to ground.

Not the best but thank you. It’s a $250 buy

It’s great for simple stuff like this but not for a big bulky harness going everywhere on a truck

@depthbrewedrollers.8793

5 ай бұрын

Very true! It will get you in the vicinity but that’s the best it run do. Especially on a short to ground because receiver wants to trace every ground wire in the whole car.

Can the powerpool meystro can bus plus can buzz minus

@13GADGETMAN

10 ай бұрын

Both the Maestro and PP4 - when you select AC P-P mode, the Min and Max numbers will display correct bottom and top voltages for both CAN Hi and CAN Lo.

Mine doesn’t work. It doesn’t pick up any signal on any wire

@13GADGETMAN

7 ай бұрын

See this video to verify that the receiver and transmitter are working correctly - kzread.info/dash/bejne/gX-K0bhvnrmbqdo.htmlsi=mwgWLZ-kC3eAjJZH If the tool does not respond like in the video, there may be a fault with the tool.