Nice setup ! May have to get this M3 .35 right away !

@CHUCKSTER636

2 жыл бұрын

I highly recommend it Bud!

@hightidelowtide6380

2 жыл бұрын

Be prepared to burn alot of air! Not sure why Fx didn't supply this beast with a 580cc bottle...

Very good gun

I have a MK ll in .357 800 mm barrel and love it ! Talk about hard hitting and accurate . I am going to put the .22 barrel back on and see what kind of performance it does . Then the .177 500 mm barrel . Damn I love this thing ! Talk about versatile .

@CHUCKSTER636

2 жыл бұрын

Absolutely the most versatile air rifle in the world! :) For fun I put a 700mm .22 barrel on the .35 I had previously power tuned and slugs were going super sonic even with the power wheel turned down on #1! Incredible Fun!

@CHUCKSTER636

2 жыл бұрын

Hey George you are definitely preaching to the choir brother! The FX Impact has the ability to be extremely powerful and accurate, and at the same time is totally modular for caliber changes and other accessories!

Good Sir 👍

@CHUCKSTER636

2 жыл бұрын

Thanks

i like this sir

@CHUCKSTER636

2 жыл бұрын

Well if you like this one wait until I show it with my next power trick on it! :)

@SniperSRI86

2 жыл бұрын

@@CHUCKSTER636 yes sir

I have a new KZread Channel called "CHUCKS FX IMPACT POWER TUNING & REPAIR" ...so you can find me there at my new channel from now on. All the best, Chuck

what is your 1st and 2nd reg settings along with the PW ?

If I wasn’t tied to sub 12ftlb in th u.k reckon this would make the list. Nice build

@user-ov8rf6jq8m

Жыл бұрын

Try and get a firearms certificate.

is it possible to load in it 105grn caster from lee mold ?

hi thanks for your video. I have the same rifle in the same caliber as yours; however I am afraid to move the dial from 16 to 2 for testing; I've heard that seals can pop. What would be the procedure to lower the power with the dial?

@CHUCKSTER636

2 жыл бұрын

Simply turning the Power Wheel to a lower setting will not cause seals to "pop"! :)

@luispelaezdiaz

2 жыл бұрын

Happy New Year my friend, for this rifle, what is the best tuning configuration? I am on this long journey to be able to practice Benchrest 50 and 100 yards

@hightidelowtide6380

2 жыл бұрын

@@luispelaezdiaz what is his tune?! Seems like he does not want to give up his info. His first reg is around 220 bar ..

@CHUCKSTER636

2 жыл бұрын

Luis you cannot hurt your rifle by turning the Power Wheel Dial up or down...

★★★Excellent Video,Best Regards from South America🇨🇱☝️🍻🍻🍻●●Pj●●

What tripod is that ? I’m looking to get a small table top tripod

@CHUCKSTER636

2 жыл бұрын

I can't remember the name but I do remember it was purchased from Amazon...hope that helps! :)

I’ve been emailing because I’m interested in getting this tune but no reply

i have the same gun, mind if i ask what your settings were, first and second reg pressure, vave line, macro and micro setting, was a slug power pin used? thanks.

@CHUCKSTER636

2 жыл бұрын

I make certain modifications in the process of power tuning guns for more power, so the setting on my rifles would have no relevance to the setting on yours.

@hightidelowtide6380

2 жыл бұрын

For max power, try 165-170 bar on first reg, 135-140 bar on second reg, valve about 2-2.5 turns out from line 4, macro 16 and micro at 4.6. Should get you in the 880s range. Every rifle has slight variable. I could not get mine to go over 888 fps. No pin/probe used. Pin/probe will get about another 20 fps. Looks like this guy has his 1st reg at 220 bar or so, and maybe 180 bar on the 2nd?

@Maloneranger0311

2 жыл бұрын

@@hightidelowtide6380 Thanks for this. Had to look hard and long to find this. Bought mine last week and after telling guy I wanted max speed for most FPE he set it at 169/161/16/4.5 and 2 turns past 4th line. So didn’t even have chance to write down factory settings. Almost impossible to find tune numbers for M3 .357 so thanks for posting this.

@hightidelowtide6380

2 жыл бұрын

@Tim Malone do you have a chrony? He set it with only 9 bar differential from the 1st to 2nd reg? There should be minimum 30 bar differential.

@Maloneranger0311

2 жыл бұрын

@@hightidelowtide6380 Yes he did. That’s why I was concerned when I have read various comments about it being 20 to 30 apart. Sent a email to FX asking for default settings yesterday. Seems as if the 1st stage should be 150 across the line from .177 to .357 from what I’ve read people saying.

My m3 is shooting 2inch groups at 50 yards.

@CHUCKSTER636

2 жыл бұрын

It should shoot every shot in the same hole at 50 yards.

@JP-py9xs

2 жыл бұрын

@@CHUCKSTER636 Just can’t seem to get an accurate tune for this 35 Cal

@CHUCKSTER636

2 жыл бұрын

That's horrible JP...something is definitely wrong with it. I could help you with that if you like...

What all did you do to the gun to tune it. It seems to me is all you did was shoot it from 1 on the power wheel up to 16 and just Wright down the FPS. Thats not being a tuner.

@CHUCKSTER636

2 жыл бұрын

Johnny the gun came out of the box shooting the 81gr pellets at 123 ft. lbs. energy and I power tuned it up to 154-156 ft. lbs. energy. When I delivered the gun my friend asked me to shoot it over my chronograph at different settings on the Power Wheel and write it down for him so he would have an idea of the power level at different settings.

@johnnyventurino8947

2 жыл бұрын

@@CHUCKSTER636 ooh ok my friend. I misunderstood, good job buddy.

Donny really does have you all fooled. His mods are overrated and even more overpriced. Absolute crap

@CHUCKSTER636

2 жыл бұрын

Well Wayne you are certainly entitled to have an opinion, but have you tried shoving one all the way up your ass to see if maybe you like it better?

@heithwatkins

2 жыл бұрын

@@CHUCKSTER636 My exact thought........ Donny FL probably dosen't make one large enough to satisfy Wayne Kerr......🤣🤣🤣