These are some of the nicest tool holders I've seen on a french cleat wall!

Only recently started watching your videos. I've been practicing my woodworking skills for a few years, but don't have my shop space organized. I really like your videos; the simplicity of your builds, the Great Video shots, & the fact that you try to keep a low budget, while still building quality storage! Thank you! Keep up the good work. And Cheers!

For shooting from the hip I think you’ve done a great job. They function so well. It’s hard to beat the French cleat system

I like how you do your videos.... I don't need to see a person cut a piece of wood! Great Job, thanks for the entertainment and ideas!

I enjoy watching your videos as they are full of ideas best suited for me as I retire very, very soon and intend on turning my single garage into a woodworking shop. So I will be going through all your videos again to reproduce a lot of your ideas before I can attempt any of my own. Keep up the great work.😎

Great video: creative use of scraps for high need purpose , no BS talk, entertaining to watch because of good ideas, steady flow , only show what is needed to demonstrate concept and methods. You videos are among the very few that I don’t find myself scrolling through to get to the useful information in need.

I like how your large speed square ended up with the tape. Thats real life right there.

Your ideas are always good. Nothing amiss with any if your tool holders. Simple and practical and so easy to make. Wish I had wall space for a French cleat wall.

I have watched a lot of french clear tool holder videos. Yours are by far the best ideas.

Wow, I admire how your brain works. What a great organized workspace.

Great video. Only suggestion may be for the corded trim router. A slot cutout in the base allowing it to be stored with the bit in it and at depth. Not for long term storage obviously, but would allow you to set the tool aside securely with out having to readjust the bit. I know you have gone over to the cordless so the corded just sits most of the time. However, having two trim routers, you may find that you can use them both to add to productivity. For instance one with a flush cut and one with a round over. By having both ready and adjusted you don’t need to change bits keeping bit changes and adjustments to a minimum.

@Anthany0916

Жыл бұрын

I agree. I've put up a few cleats on a wall and started making some basic holders from some plywood, and I'm gonna cut a hole in the center for my trim router so I can keep it at the depth of had it set at like your saying. I'll prolly drill it out like ¾ so it'll fit all without a problem no matter what I got in it. But that's a great idea!

Awesome. There goes my weekend 😅

A man after my own heart. 10/10

John, the fact is that a workshop continually evolves, what works now may not in the future, it doesn't matter what others think, it's all about what works for you now.

Thanks for sharing. An excellent use of space, and very clever, simple holders, put together with scraps, pins and glue. I'm in the middle of re-organising my own garage workshop, which is why I had the good fortune to stumble upon your channel.

Very satisfying. Thanks!

Thank you for your inspiration

Amazing work

So many good ideas here. Thanks!

Outstanding! As you said, you could have built something more integrated and "pretty", but your various docks achieved your goals perfectly, and they fit spot on into the French cleat rails you already have. You have a great imagination and a rare eye for simple innovation, my friend. Keep up the great work!

thank you. i really needed this

Brilliant!

Great ideas. Thanks for the video!

Brilliant job

I've always loved your vids but this one is probably my favourite. Power tool storage has always been my most frustrating thing in the workshop, i will be using some of these ideas for sure!!

I like the jigsaw holder!

Wow, that's just what the doctor ordered, I'm going to use your idea 💡 Thank you....

Great video and thanks for the idea’s.

As always AWESOME! Thank you kind Sir.

Nicely done sir!

Very impressive.

looks great and I will be coping some of these.

Excellent idea and design!

Nice job, well done!

Clean and neat and practical. Perfect!!

simple and brilliant

The videos where you go in without a plan, to my viewpoint, end up being your best videos. Huge fan! Keep up the good work 👏 🙌 👍 👌 💪

Love the simplicity

U r awesome. I struggled for words of appreciation.

Excellent advice, thank you.

Thanks!

Great tips. Thanks for video. For just what I've been searching.

Fantastic ideas. Super creative!

Pretty smart! Nice ideas well crafted too. Thanks

Love it

So helpful 🎉

Brilliant work, Jean! 😃 Thanks a lot for sharing all the ideas! Stay safe there with your family! 🖖😊

Thanks boet, great ideas as i have a small shop

Fantastic video and sets of plans! Thanks!,,

love it! can't wait to get my shop organized! In the middle of that project now!

Great video. Thanks.

The drill holder is my favourite, smart.

Great work

Good stuff, thanks for some great ideas.

Just the video I needed-my shop is almost finished and your ideas will be put to good use when I start organizing. Thank you!

Not only a great vid for tool storage but a shopping list for all commonly used power tools too ! Brilliant !

GREAT episode, now I have lots of new ideas. THANK-YOU.

Great designs as usual!!!!

Awesome ideas

Very cool.

Great job...

Much appreciated Wood Shop Junki, you have given me some great cheat sheet ideas for when I get around to doing this myself for the wood shop ! Thank you 😉

These are really good ideas. Easy and simple doesnt get much better than that

I love these small holders. I will be organizing my shop this summer and have been taking notes from your example. I love the belt sander attached to the wall too, so I'll have to go back and find that video. Please keep the videos coming, you are an inspiration.

Thanks for sharing 👍 I've learnt a lot from you today

Lots of great ideas. Thanks.

Excellent ideas. thank you.

Top notch work. Well done!

I think you have the best idea for tools I have ever seen.

great stuff. I will use these as inspiration for my shop storage.

Great job, some excellent ideas for tool storage on the walls!

Very much so, great way to store all these hand tools, I have to get busy making some of these holders.

I like this showcase of a number of variations and concepts that can be reused. You’ve not only solved problems in your shop. You’ve demonstrated ways others can solve problems for their own unique tools.

Beautiful! You've made good designs that fit all those different power tools. I love it.

great ideas thank you

One of the absolute BEST instructional videos on KZread. THANK YOU SO MUCH.

Great content Space is at a premium so sometimes you use what you have to make it work! Look forward to each video 👍 Hello from Massachusetts USA

@thomascarhart928

Жыл бұрын

Tanks for the response to my comment.. Having lived in Johannessburg for 5 years as a teenage, your accent just brings back many great memories of the country. Please keep up the grear work be postive and stay healthy

Just what I needed today👌

Simple. Cheap. Practical. What's not to like? Great job sir.

Thanks, I'll be using ideas from this

Nice job!

Great ideas. Thanks for the tips!

Just needed a holder for the videos MVP. The pin nailer! Awesome video and love the tips. Thanks for sharing.

Well done!

Great ideas for sure !

this exactly what i was looking for esp scrap wood thank you

Great job ! It's Amazing

I always look forward to your videos they are always something interesting and are great ideas.

Really good job on the holders, and on the video too!

Very nicely done. Great to watch and learn. Definitely inspiring to build and organize. Thanks

Useful

i really liked the way did it and so smiple

Great ideas! Simple and effective.👍

Ingenious as always Jean, love you channel.

Just what I needed to clear up my area. Would like to see some build plans

Loves scrapwood

Really well thought out holders. The jigsaw and belt sander hopders are quite unique.

Your videos have convinced me I need to put in a cleat wall into my small shop! I love these designs.

Great designs that I am going to mimic in my own shop. I am grateful for your explanations about not only what you are doing, but why. That is such a great help to me!

Usefully examples