I’ve had this machine about 8 months and didn’t know I could do this 😹😹

Unfortunately, I have to add to the list of reviews highlighting the nonexistent customer service or support. I purchased a Cameo 4 plus 7 months ago. The machine powered off during a cut and won't power back on. Every attempt at contacting support has been unsuccessful. This is a valuable lesson when selecting a new product. Product reviews are important, but more than that are reviews about customer service. Silhouette doesn't have bad customer service. THEY HAVE NONE!

@faerykpop

4 ай бұрын

Honestly, don’t. I’ve gotten more answers off the Reddit page than anywhere else. Questions I’ve needed answered I’ve gotten better through other consumers.

Very useful. My machine came yesterday only.

I went thru all the set up the part that you say will zinc the free download. i don't see my portrait 3 or the design that came with it. what i need to do.

Thanks for this video! I had an incredibly hard time finding Portrait 3 unboxing/setting up info & found this video by accident - did you realize the description does not indicate that it includes setting up your new machine (which would help search results)? I am new to the Portrait 3 & could not find links for Portrait 3 setup on either the website & KZread. Perhaps your IT folks could check it out ...

Does the printer have to be inkjet? Or will the registration marks still be legible using a laser printer?

Hello, I have a very headache. The setting when I cut is obviously accurate, but it is always offset a little after cutting（portrait 3）

@amorjeon473

2 жыл бұрын

Hi, my machine have same problem with yours, have you find the solution?

What should I do if I suddenly don't want to cut when I am cutting and I need to stop and quit（Portrait 3）

Do you have to purchase a separate designer addition to use or use what you have and connect via Bluetooth to sSilhouette ?? Does that make sense

@KellyWayment

4 жыл бұрын

No purchase upgrade necessary. You can use the basic software with the Portrait 3 and Print & Cut. Using Bluetooth is optional, and that also does not require a purchased upgrade. You do need the latest release version of Silhouette Studio 4.4 to run the Portrait 3.

Also, how come when I use Silhouette studio to print my designs, the quality is compromised and reduced. They become pixelated and blurry.

@paulabellinati

10 ай бұрын

Me too!!!!! Does anyone know if there's any way to solve this?

Is there a kraft blade which is compatible with the new Silhouette Portrait 3?

@KellyWayment

3 жыл бұрын

Yes, the 2 mm Kraft Blade is compatible with the Portrait 3. www.silhouetteamerica.com/shop/blades-and-mats/SILH-BLADE-KRAFT-B

Is this machine available at India🇮🇳

Just bought mine last month but how come my portrait 3 is not cutting deep enough? It barely cuts the first layer of sticker paper. I even bought and try to use kraft blade still no successful cut.

@serahmatsu6906

3 жыл бұрын

Have you tried with different blade numbers? I come from a Spanish tutorial that with a 4 or 5 value, she could cut pasteboard

Glitter sticker paper? What else have I missed in my life?! Where can I buy that?

@KellyWayment

3 жыл бұрын

Yes! This white glitter sticker paper is fantastic! Buy it here. www.silhouetteamerica.com/shop/MEDIA-GLTW-ADH

so in this case if i were to be making stickers, i owuld have to set my paper/media settings to A4 instead then (5:21)??

@CreateWithSilhouette

21 күн бұрын

You will need to set your media size to whatever size you are using. So if you are printing and cutting on an A4 size then yes.

In order to have color i will need another printer ??? Unless i use vinyl

@carlyg8051

3 жыл бұрын

I wasn't aware of needing to use another printer I thought that was what the machine did I'm soooo confused now.....I bought a bunch of ink for the silhouette too.....what is the point of that I'm brand new to this machine lol Ughh

@tiabrown1h

3 жыл бұрын

@kellywayment

Is it vinyl stickers? Please help

What is the difference between this and the portrait 2 please x

@KellyWayment

3 жыл бұрын

The Portrait 3 has automatic tool detection, uses the new Autoblade with one-touch reset, and can perform pop-out cutting with no mat.

help me please can this machine be used to cut HTV?

@KellyWayment

3 жыл бұрын

Yes! It's great at cutting heat transfer vinyl. :)

Guys! I’m officially struggling to get things right! I broke my mat! Omg! Question: I need to make label stickers from photoshop. I just need to use the shape tools from SS. However, the shape tools doesn’t place inline with my label to cut. Any helpful soul to guide me on this? Really desperate. Clients are queuing for my sticker s

@KellyWayment

3 жыл бұрын

If you are printing from Photoshop, the cut lines in Silhouette will not line up because you need to be printing with registration marks on from Silhouette Studio. If you are printing from Silhouette Studio with registration marks, it should work. You would need to save your Photoshop document as a JPG and then open that JPG in Silhouette Studio before using the shape tools to create cut lines where you want. I hope that helps!

Thank you for your info. I'm new to this. Now one question: Can I cut my own silhouette design with this machine? Thank you again.😀

@KellyWayment

2 жыл бұрын

Yes you can! If you create a design in Silhouette Studio, it automatically is made with cut lines. If you bring in an external image (like a PNG or JPG), you will need to Trace the design to assign cut lines.

@rosalioinojosa

2 жыл бұрын

@@KellyWayment Thank you!

how I can cut sugar paper? its don't cut not matter what blade i chose!

@KellyWayment

3 жыл бұрын

That's not a typical cutting material, so you'll need to do some trial and error with test cuts. You may want to reach out to the manufacturer for their suggestion if they say it can be used with cutting machines.

When I use the print option, it prints my designs in poor quality. How do I tweak this so I get good results?

@semyil6721

8 ай бұрын

You can manage this in your print settings. On the package of the sticker paper which I use it is explained. Maybe you have also instructions for printing. 😊

Can we make insert card with it if yes then please make tutorial of it dear please❤❤❤

I have had this machine for a year and never once did it get the registration marks right. I can only use it for vinyl and I'm highly disappointed.

@MusicalSaraJo

3 жыл бұрын

The Cameo 3.

@kuromibun4368

3 жыл бұрын

Im having the same exact problem!!!!! Was there another machine you bought that works better?

@KellyWayment

3 жыл бұрын

Try watching this video that digs deep into Print & Cut and how to avoid common problems. Most of the information applies to all Silhouette cutting machine models. kzread.info/dash/bejne/emd31qOvY6qnhtI.html

Just got the portrait 3, love it! What I cant stand is buying a product that requires software that is hideous unless I pay more. That's just rude. Happy cutting!

@carlyg8051

3 жыл бұрын

I just bought mine a few days ago too! The portrait 3. How are you liking yours?

@marusnak1113

2 жыл бұрын

Yep, I just wanted to cut basic triangles for paper beads, and was pissed to learn I had to buy an upgrade to do that - seems as if anything that connects to a computer could figure that out.

Can I use Siser Easyweed with my Silhouette Portrait 3?

@reireiz

3 жыл бұрын

Nope

@ZymixProductions

3 жыл бұрын

@@reireiz 😭😫 Nooooooooo! Hopefully I would live through this one 😁👍 Thank you!

@ZymixProductions

3 жыл бұрын

@@reireiz What do you use?

@reireiz

3 жыл бұрын

@@ZymixProductions Cricut machine I just came to this one to see if I can find a better one

@ZymixProductions

3 жыл бұрын

@@reireiz I have heard that Silhouette is easier to use than Cricut. This is one reason I use Silhouette. But some people are happy and doing great with the Cricut.

"Auto-Blade" Is not Auto. and the machine is tapping the blade 5 times to get to the 5th possition and in most cases it doesn't work blades stays on 0 or goes to 1 or 2, in this case take blade out click it with pen manually to desired number. then place blade back and remove from setting that it is AUTO blade and auto cut.

"Print & Cut" and in order to print you need to buy something else because this device does not print. So this is just "Cut." Listing "Print & Cut" in the specs for this machine is misleading because customers will naturally think it means that it can print and cut. I'll be checking out Cricut because their specs are up front instead of shady.

@julishiamorharper8152

3 жыл бұрын

People should know that it is a type of cutting machine and if someone is not doing research on cutting machines before ordering one, they shouldn’t order one. I’m sure they define what the print and cut means because she said she prints out the paper, she also had a printer as well. Along with you have to print anyway for registration marks.

@avaDesdemona

2 жыл бұрын

Well, that's a bit like saying "I bought a trailer to move things, but now I find out it doesn't drive itself! Turns out I also need to buy a car!"

@alitasledz9786

2 жыл бұрын

@@avaDesdemona exactly my point, Cricut never suggested that their cutters do anything else. I came at this from working with CNC machines. It’s like having a pick up in your analogy. Like a trailer that has the car built in. Some of them both laser etch and cut. Saying your product has Print and Cut without it having the ability to print and cut is misleading. Like naming pleather Real Genuine Leather. The capital letters don’t suddenly make it anything other than a lie. So without having some place anywhere on their site clearing up that a car is required, claiming their trailer is Load and Drive, is the same as claiming that it is a pick up.

This video is very boring and I can hardly hear. The volume of the teacher is very low. WE NEED ANOTHER VIDEO THAT WILL WANT CUSTOMERS TO BUY THIS MACHINE.

@debraforesta110

3 жыл бұрын

I did not find it boring and I could hear her just perfectly. I'm glad you went slowly and explained everything very clearly. Thank you.

@marusnak1113

2 жыл бұрын

It might not be a good idea to encourage buyers. They need to upgrade product, instruction and customer service