Pin this to the top please. WARNING: Always Degrease/TSP filters before acid soak. The acid will make the oils/lotions sticky and absorb into the filters possibly permanently. Recommend starting acid dilution is 20:1, really only need to soak till no more bubbles are coming up. After soak add baking soda slowly to neutralize acid mix. Acid will whitewash/etch concrete. Should use separate trash can for initial quick rinse. A great nozzle I use is the pulsating Melnor Mpact. Please thumbs up 👍 this comment to keep it at the top.

@FilipinoPride10

14 күн бұрын

Thank you

@stevenpriefer5039

5 күн бұрын

How do you decrease them

I love people like you. Curious and inventive. Maybe even extreme at times. That's how we got to the moon.

Not sure if you mentioned, but don’t let the filters dry out before cleaning. (Like if you have 2 sets and swap out a clean set, don’t let the old set dry before cleaning.)

Wow, this is crazy. I've been cleaning these filters for 20 years and have never done anything so elaborate. I use a 1500 psi pressure washer and in about an hour or so my filters look as good as yours. I agree you don't want to use a high power pressure washer and you definitely need to use a 45°fan nozzle but that's about the only caution you need. No chemicals no huge water waste just clean filters. It's really easy to tell how clean your filters are when you have 0 pressure on your Guage after cleaning and pressurizing the system.

@mattg6975

3 ай бұрын

You're actually supposed to soak the filters in muriatic acid mixed with water minimum 1 part acid to 5 parts water every so often to extend the life of the filters and let them breathe for better performance. Carbon buildup and other things like no phosphorous treatments or algae can clog the tiny pores between the fibers of the pleats. Yes it is technically a waste of water.

@joshspeed7794

Ай бұрын

@@mattg6975 overkill. Just hose them off. Ten years of owning a pool and I change my filters once every 2-3 years and have never soaked them or had any problems. All of that extra effort, chemicals to dispose of, and quite frankly risk is so silly. Next...

I stand the filters on an umbrella post for stability. It works great! 4:57

@jodisimpson1132

11 ай бұрын

@donpollock533 this sounds interesting. Is there a way you could tell/show me more about how this is done? Maybe a video link or photos?

After 15 yrs with a DE filter I switched to cartridge for 15 yrs, now I'm back to a new 48 sq.ft Hayward DE. It filters better and a simple backwash and rinse with the 6 way valve every 2 or 3 months is easy. I hated cleaning the cartridges and having to replace them often because they eventually get clogged up and the pressure is high again in only a few days. Tip for those that want to stay with cartridges: Pay a little extra for Haywards instead of Pleatco and other off brands. There is a big difference.

Just following step 1 by thoroughly spraying in between all the pleates of my filter made a huge difference in my pump's pressure. Thank you!!!

I know lots of people are saying to just do it more often and I know that would be easier(and my plan for the future). But this was the video that worked for me to get *really dirty* filters back to looking good. Thanks for doing a video for those of us who aren't dealing with the ideal conditions I saw in so many other videos.

It doesn’t take long if you clean the filters more often. I bought a nozzle just for cleaning filters it has I believe six little sprayers that fit in between that pleads of the filter does a very good job. Does not use much water and does not take long. I’ve been a pool alarm for 15 years now and watching your video I would empty my pool and fill up with dirt if I had to go through that much trouble.

Awesome thats cool man I appreciate the effort that you put into this im a been there done that old guy had a pool for 40 years and your information is SPOT on buddy ! And oh the old acid can be diluted down more and used on your lawn to help break down certain materials its really harmless great stuff thanks

You're not supposed to use direct streams of water. You should use a fan setting.. That kind of pressure will damage the pleats and imbed dirt in the fabric

I really appreciated this video. I've had a DE filter for 20 years and considered switching to cartridge. Think I'm going to stay with DE. Thanks again.

@kirkwilson5905

11 ай бұрын

Good choice. Hayward makes DE filters with cartridge size/shape DE filter grids. You can actually use either. We use the paper filters for new pool start up, then install the DE filter grids and load the media. More expensive up front as you need a backwash line piped to an approved drain. Plus the filter valve. But in the long run easier and better filtration. Occasionally you still need to pull the grids and clean then just like this video.

@grzewnicki

10 ай бұрын

Pentair clean and clear: cartridge filter that is designed to work with DE. Filters down to 5 micron, I'll never go back to just cartridge, my pool stays sparkling clean, whereas with just plain cartridge I would see sediment on bottom weekly. Also, vacuuming up algae, it does not go through the DE. In the past vacuuming algae w/just cartridge, you would see a slight green tint coming out the return into the pool.

@TexasNightRider

10 ай бұрын

@@grzewnicki Thank you.

@luatphung1930

9 ай бұрын

My filter has the same 4 cartridges. Pentair quad 100 DE. And they do require DE powder (10 lbs suggested for 100 sq in surface area). Are you saying I don't need DE for this type of filter/cartridge?

@kirkwilson5905

9 ай бұрын

@@luatphung1930 There are both types of cartridges available. DE and Non-DE. Make sure what you have/need. The video is regarding the Non-DE type.

Soak it with Simple Green first. It will clean and degrease the filter. You get oil on the filter from people getting in the pool with sun tan oils on.

@starhopper457

3 күн бұрын

I've wondered about gently powerwashing with Simple Green - using a 10-25' nozzle so the pressure is reduced.

Those filters look like they haven't been cleaned in months. I clean mine with a regular garden hose nozzle in the jet setting every 14 days and it's like new after. Never a need for all those products.

@JosefwitdaCoatOn

2 ай бұрын

Every 2 weeks! 🤣 you gotta be bored

@Cardboard0G

Ай бұрын

@@JosefwitdaCoatOncartridge filters are so easy to clean and since they can’t be backwashed, the more frequent the better especially if you have oak trees or dirty rainwater runoff like one of my customers. Her carts need monthly cleaning or the pool looks filthy

@HaydonRyan

Ай бұрын

Mine were dirtier then these after all the pollen dropped and 3 months of build up. I didn’t use any chemicals and got the flow back to exactly what it was before. But then everyone has different pools, in different places. But I also didn’t try and get them absolutely pristine. Mostly clean is good enough, esp when replacements aren’t too expensive.

What I've found that works best so far is a ball valve shutoff, which lives on the end of my hose anyway. I crack it open and adjust it for the most forceful steam. It's at least twice as fast as a jet nozzle. I also have one of those car wash sprays that I'm planning to give a try.

Nice video thanks for the information. I just did a big step 1 cleaning at the start of the season, I will try these 2 extra steps.

@House44-fixitdude

11 ай бұрын

Thanks for the nice feedback. I hope the video can help you out going forward.

Use a tip that has a fan shape spray pattern. I’ve been doing this for years and it works out great

I use a very similar process. For the acid, neutralize it with baking soda (buy a big bag at sam's or a pool supply place) before dumping it out . Baking soda turns the HCl into saltwater. Just add it until it stops fizzing. I use a pressure washer and then a regular garden hose sprayer attachment. The pressure washer gets the initial surface gunk. The TSP PF is new to me, I'll give that a try.

Place the filters in a small feeder trough to soak! (i.e., horizontally! - not vertically) Far less water, acid, TSP! Just my observation

I have 4 filters and it would take me two hrs to do this way. I use a comb which connects at the end of the hose which I highly recommend.

I rinse mine well then a white vinegar bath for 2 days in a large dollar store pitcher( holds 2 filters) Same results. I rotate mine before they get bad. Maintain my pool but still need clean filters in the summer more often. Been using the same set of filters for years.

Great knowledge 👏

I just take them to a self carwash and they come out looking like new only a couple bucks no dangerous chemicals only ten minutes. and i dont have to dump all that water and acid (which you neglected to say)

Very cool. Thanks for sharing.

@House44-fixitdude

11 ай бұрын

You’re welcome, I hope the video helps

I saw another guys channel on here where does the muriatic acid bath process but after he’s done he pour out the solution into his pool and says the uses acid will also help the pool too. He doesn’t pour in the sediment of course- what did you do with your bath solution when done?

Nice job, they look new. I really don't know why anyone would buy a cartridge filter, except for the initial cost savings. The labor & water usage is huge.

@Izaik

10 ай бұрын

You’re essentially draining water from your pool every time you backwash a sand or DE filter. Plus with DE, you have to recharge the grids with about 80% of the filter’s DE capacity after each backwash. Sand wears out over time and a sand change will cost you about $1/lb. A typical residential sand filter holds 300-450 lbs of sand. Oh, and when a sand change is performed, there’s always a risk of the laterals breaking. This is especially true if pea gravel was not put down first before the sand. So you’re gonna need new laterals plus labor. Oh, looks like you have a leak at the bulkhead and one at the dome cap too. Lots of calcium buildup. I think I see a crack forming in the fiberglass shell. Shall I continue? 😂

@justinhoskins9653

4 ай бұрын

No idea mate cartridge filters mostly get cleaned once a month takes 15 minutes wayyyt better the sand

Like others, I have a lot of thoughts on how to improve on this but let's face it, we all have different conditions to contend with. So I'll limit it my suggestion to one thing. For the first step of 1 (say 1a) use a standard garden hose sprayer and go around once with a wider spray to get 70% out then do another pass with your attachment (step 1b). This will save at least 25% time and it is much more gentle on filter. That is, first pass rinses away dirt while second pass forces out embedded dirt.

Thank you I will try the TSP step

Interesting. Thought I was going to learn something new. I've been cleaning my 4 huge filters for years with a garden hose set on jet. Same process but no special tools. Somehow, I figured it out along with a million other pool owners (who do exactly that) by thinking about it for 30 seconds. Save the money. Clean as needed with what you have in your yard.

Have you tried just starting with the acid bath, and then rinsing pleat by pleat?

Have you thought about doing the acid bath before the first rinse and then just do the one rinse after the acid bath?

LOL, well never ran across anyone quite as OCD as myself when it comes to cleaning these filters, but I'm also a tad ADHD, so I'm not spending 3 days on the cleaning process, I do however spend 30 to 45 minutes per filter, which ends up about 5hrs from start to finish. I've also tried the acid soak & even a bleach soak, neither gave me enough positive results to make it worth the time spent. Thought the Amazon hose attachment was nifty, I've been using those little 2" brass hose adapters you can pick up at the big box/hardware stores for under $5, with good results. Question: Have you ever tried doing your soaks 1st, before the water blasting? Honestly, this is my most dreaded chore from 20+ years of owning this pool & if I ever have to change the filter housing again(yes, I've already replaced it once) I'm ripping it all out & going with a sand filter. I figure between the cost of the filters, water, tear down & reassembly & my time that 2 to 5 minutes per week to backwash, it's a more feasible investment. I will also go completely with non-Hayward equipment, which I've been eliminating every time one of their products fail. The most expensive piece of my equipment package was the heater which failed completely 3 months after the warranty ended & had constant problems from day one. Thanks for sharing.

Wow, beautiful filters! I'm in my 3rd season of pool ownership, also inherited with house and also uses cartidge filters. I recently tried an overnight soak of clothes washing powder detergent based off someone on KZread recommending it for cleaning their spa filters. They looked better and the PSI level on my gauge did come down a bit. I tried two different kinds. With the last kind, now my pool has bubbles when we swim! We could probably wash our clothes in it, ha! It also has a different "feel" that's hard to describe, but the same as last season. I don't know if the detergent will naturally go away or not. Any advice on that would be helpful. Also, I'm curious about your PSI readings before and after on the gauges. I bought four brand new filters this season (and a new gauge) and the reading was 13 PSI, so I set that as the starting point. Now, after cleaning the filters, the initial PSI reading starts at around 16 or 17 PSI and quickly goes up to around 20.

@House44-fixitdude

11 ай бұрын

Every system likely has a different operating PSI. The key is the amount of increase in pressure versus the nominal pressure with freshly cleaned (or new) filter cartridges. For my system, the operating pressure with clean cartridges is 20 PSI. When the pressure approaches 30 PSI, I know it’s time to clean the cartridges.

@danaparish1644

11 ай бұрын

You must use a “PHOSPHATE FREE” Detergent.

@josephgraham1065

10 ай бұрын

powder cascade works good.

@ryancunningham8367

10 ай бұрын

@@josephgraham1065, good to know. What proportions do you use?

Thanks man. Very helpful

I use an old toothbrush to help open up the pleats. Brush also helps to loosen the debris for the hose water.

The pool filter flosser attachment is a helpful tool to clean the cartridge. The nozzle he used packs more punch but I also worry about the damage to an aging filter

WHATS A QUICK FIX FOR A HAIRLINE CRACK ON Diverter Valves. Ijust got the blaster

Wow that's a lot of work! I just clean mine every few weeks with a standard hose nozzle set to "full". Filter comes out gray and goes back in just as white as yours. Takes about 5 minutes for one filter. I don't want to make assumptions, but just from what I see in your vid it seems you are going far too long between cleanings.

I bought an Aqua Comb and it saves an enormous amount of time and water. Its painful to watch the spraying in this video after using that tool. Combine that with your soak technique and you have a thing of beauty.

@MoultonHawk

10 ай бұрын

Totally, that nozzle is painful to watch 😂

Where did you dump the acid bath water?

Man thanks for showing us. Many won’t wash this way buy yours worked

So ., what is the problem with dirty filter? What symptoms we see that requires cleaning the filter. Or is just for fun? Thanks

I use a conventional garden hose sprayer set to a fan shape and work vertically to get the debris out upending the filter part way through. I then soak in concrete degreaser (alkali, not acid) then rinse off. I get similar results.

@IndialanticRob

3 ай бұрын

Exactly

I have 2 sets of filters so a set ready to go already perfectly clean, I clean them when I take them out with the hydrant nozzle takes 10 minutes literally then let them dry and blow them out with a air hose and I'm done. my filters look brand new and don't spend hardly any time on them. Nothing else is needed.

Dude, where did you get this idea of chemical baths from, Heisenberg? This is how you get rid of a body not clean your pool filters, so many harsh chemicals baths no wonder it worked. I’m surprised the filters didn’t disintegrate.

Some suggestions; why spend $13 on a wand? I went to $1 store and bought a package of water balloons. There "filler" nozzle they provide has a great stream of water. There is also a "jet sweep" nozzle available at Home Depot / Lowes that works. I use a smaller trash can and fill the water 1/2 way and use about 1/2 gallon of acid. I then plunge the filter in and out of the solution several times and then reverse the filter and do again. I then use a larger trash can full of water and put filters in this to rinse. Filter come out brand new for 1/2 the work and expense.

@drdrew3

9 ай бұрын

I have one of those wands and it’s awesome. It’s about 16 inches long and the additional reach makes it much more effective than a short nozzle adapter. The extra long lever adjusts the spray force effortlessly and can shut water completely off. It even comes with a second screw on tip for a powerful fan versus a tight stream. Great for pool deck cleaning in addition to filter care. Got a second one for cleaning cars and driveway. Highly recommended and good gift idea

That is a good process. I see many ideas. One "Dexter Step" was to totally dry the filter before placing them back into the pool. No idea why drying them off is really needed. Any comment of this?

@House44-fixitdude

11 ай бұрын

I’m not sure that it makes any difference whether the filters are dried out or not.

Good lord, how often are you cleaning them? Those filters looks like they were in use for over six months. If you rinse them before they get that bad no need for step 2. You should also spray downward about a 15-20 degree angle. Since we've no idea how often you change them out, my recommendation would be to cut the time in half.

..."quite a few hours" he says towards the end in a huge understatement. I have been using a pressure washer for about 20 years on my filter cartridges with no negative effects. The filter medium is really robust. Use a flat fan nozzle, align the flat spray pattern with the pleats and spray from about 10 inches away from top to bottom. About 1 hour for 4 filters. About every 3 months. Spend the extra hours playing with your kids... your wife... your dog...sheesh

I've been using a very similar spray nozzle for cleaning my filters for about 8 years. Only differences with mine is the wand part is longer and where I think mine works better is the spray pattern is more of a fan rather than yours is a skinny stream

So do you like the shower you get with it? LOL I get the same results with a garden hose sprayer on fine stream. Thanks for the new technology

This worked great! I would think you shouldn't have to do this every time but would work great if you had let the cleaning lapse for a few months.

God, just use a regular adjustable spray nozzle, i usually just put it on the "jet" setting and move left to right, top to bottom. Had my cartridge filter for 5 years, only replaced the cartridges once, never had an issue just rinsing them with regular water and a regular spray nozzle.

@scotthanford9619

10 ай бұрын

exactly. this guy is wasting his time with that sprayer he bought. just makes the process even more tedious.

I would like to see inside the pleats. You can make any cartridge white on the outside and it could still be toast.

You mentioned that you don't dump the acid bath near plants but where did pour it out? Did you dilute it and pour it down the sidewalk or just poured it out? I need to clean mine and I just use a pressure washer hose. It doesn't get it as clean as yours but might have to try the TSP PF.

@House44-fixitdude

Жыл бұрын

Muriatic acid must be diluted in water before disposing of it in any manner. I can’t find a universal standard on dilution and have seen recommendations of 10:1 all the way to 64:1. In my case, I use a 45 gallon trash can so I’m at about 40:1. I have a bare gravel area with no plants where I pour it out and then I hose it down more to further dilute it. The best thing would to be to check your city codes regarding acceptable dilution and disposal.

@DesmoSD

Жыл бұрын

@@House44-fixitdude Thank you. I have used muriatic acid to clean the salt cell and added baking soda to dilute it even though it's a small amount.

@ddsmitty1

11 ай бұрын

@@DesmoSDthe baking soda you’re using isn’t diluting the acid, but it’s neutralizing the acid, and that’s better than diluting it. Just add baking soda until there are no more bubbles.

@crackers819903

11 ай бұрын

@@DesmoSD the acid you use to clean the salt cell can just be dumped into the pool to lower your ph...that's what i do with mine.

It would be interesting to try it horizontally and use the pressure wash to spin it. That way you get the spray wash and centripetal force helping eliminate debris

@mikelyon2249

2 ай бұрын

What would you spin i† on?

So you just pour the acid bath into the ground?

I've read a lot of comments here saying people clean their filter cartridges every week or two weeks. Maybe I'm not understanding because I have a regular pool with a Pentair filter that has 4 cartridges about 3 ft long each. To get to them you have to disassemble the filter by draining the water in it, using a wrench to take off the metal band, and then lift the top half of the filter off. Are these people saying they do this EVERY WEEK? That sounds insane, so maybe there are other types of filters where the cartridges just pop out? Also, when I put in the pool in 2009, the company told me that the pressure gauge at the top of the filter has a "Clean" mark that tells you when you need to clean or replace the cartridges. You can also see the water feature/fountain not spraying as high. Based on this gauge, my filter goes about one to two years before it gets to "Clean" (with "crystal clear water the whole time, as people like to say), and the cartridges look like this guy's did, with the algae on them and all. I saw one comment where the person couldn't believe algae could be on them while I'm wondering how they could NOT have algae. But again maybe I'm misunderstanding the type of filter or cartridges some people are talking about. I'm not criticizing, I'm just wondering what I'm missing with not needing to clean my cartridges but every year or two.

@SheilaSpencer1

9 ай бұрын

I clean mine every 1-2 months.

I'm surprised you didn't consider back-flushing (from the inside out) versus just driving more of the contaminants into the inside of the filter. Start by brushing off as much of the outer surface gunk as possible instead of driving it into the filter media with the needle spray, then use a low pressure needle spray parallel to the folds to remove the stuff in the folds instead of forcing it into the filter. Then use your soaking technique, followed by spraying from the inside of the filter out. What I'm describing is how I clean reusable air filters, where you don't want particles to migrate to the inner surface of the filter.

@hughbrackett343

10 ай бұрын

These cartridges have a plastic pipe with holes running up the center. You can't get at the inside of the filter media to clean it effectively.

@kameljoe21

10 ай бұрын

@@hughbrackett343 That is why you need to build a fitting to pump massive amounts of water in to them. The reverse flow does work. While you may not be able to get filter from the inside. Water still can get there. you just need to find a way to reverse the flow in to them. Using a cleaning agent that strips the oils from the filters and pump in a bunch of it. If you have a large enough tub you can recircleat the same water. Twinke style stock tank will allow you to lay them horizontal. Using a pool pump and some fittings and a way to press it tight would be able to get it to recirculate. You can buy pool filters for around 150 to 300 dollars to which you can use to filter the tub so that way you do not reinject debris inside the filter. Add a bunch of dawn to the tub and then allow it to filter for half hour or so then begin the flushing process. They should come out quite clean. Oils is one of the reason filters get dirty to and that oil sticks around. Dawn will strip oils away.

@grey1wa

10 ай бұрын

@@kameljoe21 I prevent the Oils in the First place toss a "magic eraser" into the Skim basket.. I know not perfect but it has extended the time by filters run between cleanings

@kameljoe21

10 ай бұрын

@@grey1wa that is quite interesting.

Is there a special tool to lift the lid on a pentair 200sqft cartridge pool filter? I always have difficulty lifting it off due to rubber ring

@sirifail4499

2 ай бұрын

Make sure, after opening the air valve at the top, that all the water has drained back and there is no more vacuum. Bang it a couple times near the band with you palm and it should come off pretty easy.

Here's a little tip. Always spray and rinse them with a filter cleaner/degreaser. If u dont and go straight to the acid bath it will cause the grease to clump up and clog pleats. Can also calcify the pleat rows and reduce circulation and filtration over time.

How often do you deep clean them? Abd how often do you find you need to replace them now?

@House44-fixitdude

Жыл бұрын

I deep clean them every time. Before I started doing that, I had to clean them far too often, now I can go many months between cleaning. I usually replace them after a couple years, when the horizontal bands start to become brittle or break.

@J_S0711

11 ай бұрын

You clean them twice a year.

Same filter size. 2 sets for 12 years- rotate yearly only. Keep chlorine level adequate- salt water pool. Straight bleach -only chemical I use beginning of season, and if any shocking needed. Trash can soak simple green/bleach over night. Power wash - yes power wash- I drop them on a metal fence post- to allow distance. Power wash is perfectly safe and more efficient.

Just water blast them on a fan setting, takes about half the time you have + no chemicals needed.

I clean my filters every week or other week, skimmer 2x a day and vacuum every week . Any debris I remove with the net. Leaving debris in your pool causes problems. A simple spray nozzle on your hose should work fine. It’s way more water volume, water volume equals speed. Your filter looks moldy like your free chlorine isn’t high enough. Mine look new after just 5 minutes. There should not be calcium build up on your filters unless your numbers are way off. My total time is less than 10 minutes.

@gregjohnson2073

10 ай бұрын

I use the exact same system. Should be running off dirt and not alge

i think if you sprayed at a 45 angle then you wont be forcing the debris deeper i would soak first then spray with a orange citrus degreaser it is a strong acid and your pool shouldnt be that concentrated so the filters arent really used to it and according to manfctrs when the pleats get fuzzy then its time for new ones hope i didnt sound like an a hole just trying to help as well thank you Todd .Todds pool and spa service since 1989

I'm not trying to be rude here, but I'm always trying to find out a better way to do this task that has to be done at least 3 times a year. To be honest with you, that looks terrible. I use an Orbit Max 8-Pattern Nozzle, part number 26700 that you can find at Lowes that puts our far more water and likely pressure in a "Jet" than your tool. I HIGHLY recommend this nozzle. Additionally, my hose bibs are Arrowhead Arrow-breaker hose bibs (because I swapped them out) that supposedly put out more water than traditional hose bibs with added vacuum breakers. I did make my own filter holder using part of a broom handle, a toilet plunger, and weighted base for a table sun umbrella. I'm on a well with my pressure set to be within 40-60 PSI, but with my cycle stop valve I'm probably running at around 55 psi. The amount of water and likely pressure compared to yours is way over and beyond.

You mentioned about the amount of water you are using. To reduce the amount of water as you are turning the filters over anyway just fill the bin to just above the halfway line on the filter then you'd easily be reducing the amount of water being used by a third! 👍

I've been using a Hayward missle system cartridge for 20 years. The filters are not meant to last longer than two years and then you replace. Re-cleaning will not fix the problem once it's passed the lifecycle. Just buy a new one every two years, and problem will never return as long as you clean it during the season periodically, and obviously maintain your water with chlorine, salt, etc..

If you used a clarifier cause I was told to r my cartridge filters ruined or fallow these steps

@House44-fixitdude

11 ай бұрын

I’m not aware of an issue with a clarifier damaging filter cartridges. I believe the cartridges could still be cleaned.

@robinandnate338

11 ай бұрын

@@House44-fixitdude yes we were told by pool place it puts a film over the cartridges. we can't get r pool clear it is cloudy we just put a brand-new cartridge in and shocked it woke up yesterday and still cloudy. we have never had this issue before. Not sure what to do at this point

There is no chance I’m doing all that… how much is a new set?

@sarahchristyrose5827

11 ай бұрын

@@FJvMHWorldwide damn… maybe pool ownership isn’t for me 🤣🤣🤣

@daveray6335

11 ай бұрын

While it works, this guy's process is ridiculous and extremely time inefficient. I spray off my filter (one large one) with a regular garden hose nozzle three times per season and I have crystal clear water. Each cleaning takes approximately ten minutes.

@TexasNightRider

11 ай бұрын

@@sarahchristyrose5827 Smart 🙂

@mikebruce6037

11 ай бұрын

EXACTLY !!! Time is money. I'll buy a new set 2 times a year. Its just part of owning a pool.

@stevebrown263

10 ай бұрын

$160/set and rising. Not frivolous for most people.

Use the TSP before the acid. TSP will remove oils and grease. A 10:1solution of muriatic acid will then remove the scale. If used first, the acid will set oil and grease, making cleaning more difficult.

@House44-fixitdude

Жыл бұрын

Thanks for the comment but I have actually had different results. I’ve tried both ways and had a significantly better result with the acid bath first, per the video. That’s why I titled it “finally figured it out” because the sequence was one of the many things I changed over the years for the best result.

Add baking soda to neutralize acid before dumping

The most simple way I found to clean my filter is to just use my hose nozzle. It has multiple spray patters. To quickly clean, I put it on 'shower' and then change to 'jet' to clean out the bugs and leaves. As others have said, do not let your filter dry after you take it out. Clean it immediately. Also, if your filter has a lot of algae, you can soak it in a mild solution of bleach water for a few minutes before reinstalling it. Just make sure to rinse it. Never have I purchased a 'special attachment' just for cleaning my filters. I clean my filters (2) at least every other day and it only takes me about a minute each. Two at the most. Also, where are you dumping all that acid water and tsp? in the yard? Down the sewer drain? Just curious.

Where did you get the wand nozzle ? Thanks

@House44-fixitdude

Жыл бұрын

I found it on Amazon by entering “car washing wand” in the search window. There are several choices.

@danfenton1939

Жыл бұрын

Yes, I see several but do you remember which one you got ? The Amazon reviews are very mixed on all of them

@House44-fixitdude

Жыл бұрын

I don’t want to endorse a certain product as I’m sure any of them would work just as well, but the one I purchased is listed currently at $14.99 as “High pressure washer wand washer gun with 2 jet water hose nozzle spray..”. I have only used it a few times so I can’t really attest to the long term robustness of it.

Genius

You shouldn't have algae on your filter cartridges if your pool is being maintained properly!

@frankdelarosa9527

10 ай бұрын

It's probably grass clippings and other small debris from trees and stuff.

@cwstewartjr1973

10 ай бұрын

Dead algea is green

@gregjohnson2073

10 ай бұрын

That's not grass clippings. It would have come off easier

Wow ! Talk about overkill. So you’re not filtering for over 2 days while you are cleaning your filters?

TSP is an irritant to skin and eyes... Not sure I'd want that residue on my filters. There are other filter cleaners that might be less irritating...

Electric power washer, wider spray and also oxi

Really you need just reverse the water flow. You build something to clamp each filter in to a larger tub then using a pump you pump fresh water in to each one. You want them in a tub to keep them wet. Then after a while you open the lower drain to drain off any sediment. Then you add detergent which will help break down the oils and debris. Flushing it out then you add your acid and soak and then flush again and then final detergent and rinse. You filter housing should give you an idea on how to build your unit. In any case you might even be able to buy or get another filter housing and then just reverse the flow and see how that works. The oils is what really kills pool filters.

I clean mine every 2 weeks with a garden hose and standard sprayer. Takes 5 minutes. Also, you shouldn’t have algae on your filters if your water is balanced.

I don't think you care much about that air conditioner or pavers or you wouldn't be putting your acid on them. Also, what do you do with the diluted acid. It will kill any plant you put it on.

I clean them once a month and change them yearly

I just use a pressure washer and it cleans them pretty good..

Tell people not to put sunscreen or oils on before swimming in your pool. It's odd to put sunscreen on before swimming (actual swimming). Except for babies and children, because their skin can burn easier in the Florida sun. Clean filter with a more fan in the spray. I dont use acids, but make sure to protect the ground waters of Florida (really everywhere).

Wash it side ways instead of straight into it

Overkill would be an understatement here. Just hose them off. Ten years of owning a pool and I change my filters once every 2 years and have never soaked them or had any problems. All of that extra effort, chemicals to dispose of, and quite frankly risk is so silly. Next...

Use ph minus and it will clear it out

That's A LOT of muriatic acid! You should probably use half that amount, maybe even less! Your filter will be just as clean, but they'll last much, much longer. You're compromising the integrity of the paper filter and the bands with that much acid.

Forget all this nonsense. Just take your filter cartridges to a self serve car wash, set the selector dial to rinse and get busy. The high pressure of the wand will make short work of the grime. Just be careful to keep the wand far enough from the cartridges to avoid damage. I've been using this method for over 25 years. It's quick and easy.

@MoultonHawk

10 ай бұрын

Ohhhhh, that’s a hack! ❤️

TSP?????

@merlpriester

Жыл бұрын

trisodiumphosphate

@House44-fixitdude

Жыл бұрын

Is a cleaning agent that is often used for cleaning exteriors of homes prior to painting. It can be purchased at most home improvement stores.

@roadwarrier9446

11 ай бұрын

Wow that filter😮. Your pool must be a dog.

I clean my cartridge filter with a garden hose every week or two. I’ve never seen anything like yours. It doesn’t have to be that hard, pop it out each week before you shock the pool and hose it off. It only takes a few minutes. Then if an algae bloom is starting you catch it right away. Been doing it this way for seven seasons. It’s easier on the pump, filter and you to make it a part of regular maintenance. No 2:07 cleaners or chemicals needed

"Gloves for safety", yet it is not a rubber glove, means the acid still goes through the glove and onto your skin...

Really? Don't wait so long to clean them. Mine have never ever been as dirty as those. Every couple of weeks I pull mine and wash them with a very normal garden hose nozzle. It takes 10 minutes as most and comes out white like new. Why would anyone allow their filter to become that dirty? Ten minutes every few weeks. I've been doing it for 7 years. I buy a new one every 3 yrs. or so just because.

Just use a power washer

@drdrew3

11 ай бұрын

Pressure washers are not used to clean cartridge filters. The pleats are just paper fiber and the high PSI destroys the mesh. It’s been tried and leads to premature failure of the filter

pressure washer with 45 degree on it, works like a charm

muriatic acid is extremely strong and dangerous!!! also this will not get rid of body oils - it will set them into the element. you need tibuse 1 cup of laundrybdetergent per 5 gallons of water. let that soak for 24 hours and thoroughly rinse. then, if you have hard water deposits you can do your acid bath using alot of caution.

They are meant to throw away. I bet it's still filthy on the inside. Thats like cleaning your paper hvac air filter!!!

Pressure washer will do you better👏🏻